Variability of the Bohai Sea circulation based on model calculations

The circulation and the hydrography of the Bohai Sea are simulated with the Hamburg Shelf Ocean Model (HAMSOM). The model is three-dimensional, prognostic baroclinic and has a resolution of 5 min in latitude and longitude and 10 layers in the vertical. It is initialised and forced with the five main tidal constituents, temperature and salinity distributions taken from the Levitus database, monthly mean river run-off values and European Centre for Medium Range Weather Forecast (ECMWF) re-analysed data of air pressure, wind stress and of those parameters relevant for the calculation of heat fluxes. The simulation period covers 14 years from 1980 to 1993 due to the availability of the time-dependent ECMWF forcing.The results are analysed by means of time series and EOFs focussing on the interpretation of fluctuations with periods above the tidal cycle. Furthermore, tracer simulations are carried out and turnover times are calculated in order to evaluate the importance of these fluctuations on the renewal and transport of water masses in the Bohai Sea.One of the major outcomes of the investigation is the overall dominance of the annual cycle in all hydrographic parameters and the importance of stochastic weather fluctuations on the transport of water masses in the Bohai Sea.     

Trace metals in water, sediments and marine organisms from the northern part of the Gulf of Suez, Red Sea

Concentrations of Cd, Pb, Cu and Zn were determined in water, sediments, gastropod (Bulla umpulla) and green algae (Ulva lactuca) collected from five stations in the western side of the northern part of the Gulf of Suez during the period February 1993–January 1994. Sediments recorded the highest concentrations of Cd (2.26–4.40 μg/g) and Pb (13.90–28.34 μg/g), While the highest concentrations of the essential metals Cu and Zn were found in B. umpulla (28.19–72.04 and 60.24–108.74 μg/g, respectively). Water and sediments showed similar spatial distribution patterns for the highest mean values of the different metals. Highest values of the studied metals were found at stations influenced by various pollution sources such as harbours, and sewage and industrial drains. In contrast, the lowest concentrations were observed faraway from any pollution source. Calculations of concentration factors (C.F.) for gastropod and algae showed highest C.F. of Cd (4312.5–8705.9) and Pb (2103.3–8317.9) in algae, and highest C.F. of Cu (5288.9–42376.5) and Zn (3686.7–9631.5) in gastropod.     

Long-term changes of inorganic nutrients in the Lagoon of Venice (Italy)

The paper aims at investigating the trends of the concentrations of dissolved inorganic nitrogen (DIN) and phosphorous in the Lagoon of Venice, Italy, in the last 35 years. The trend analysis of ammonia nitrogen, nitrate nitrogen and reactive phosphorus (RP) yielded rather different results. The decrease in ammonia nitrogen concentration, in particular, in the basin influenced by severe industrial discharges, is accurately described by a negative exponential model. The nitrate concentration did not show significant interannual trends, while wide seasonal variations have been detected. Reactive phosphorus concentration increased until the end of the 1970s at the stations close to the industrial area as well as in those influenced by river discharges and by sewages of the city of Venice. The sudden decrease that followed was most likely related with environmental policies, namely the improvement of wastewater purification treatments and the regulation of phosphorus use in detergents.     

Mechanism of Tunnel Water Inflow Caused by Bending Failure of a Waterproof Dike Based on a Circular Thin Plate Mechanical Model北大核心CSCD

Water bursts during tunnel construction endanger construction, and it is therefore necessary to reserve a waterproof dike with the required thickness to avoid water bursts and to take reinforcement of the dike and treatment of the structure liable to trigger a water burst. Using the water burst at K5+398 of the Mingyueshan tunnel of the Shanghai-Chengdu expressway as an example, and considering the type of tunnel section and the upright mudstone of the dike, the waterproof dike at the work face is simplified as a round thin plate. A formula for the calculation of a minimum safety thickness for the critical waterproof dike is deduced by analyzing the force applied on the water-proof dike, and the minimum safety thickness for the water burst section at K5+398 of the Mingyueshan tunnel is cal-culated. The numerical simulation analysis demonstrates the critical thickness of waterproof dike at K5+398 of the Mingyueshan tunnel is 1.4-1.55 m, and the calculated water inflow and water burst basically agree with the actual condition. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

静态爆破法在深圳地铁施工中的应用

静态爆破是近年来发展起来的一种新型爆破施工技术,它可在无震动、无飞石,无噪音、无污染的条件下破碎或切割岩石或混凝土构筑物。深圳地铁2号线东延线土建工程安托山站—侨香站区间矿山法施工竖井系选用此工法在2 500 mm×3 000 mm雨水箱涵附近成功地进行了中、微风化花岗岩开挖施工,确保了雨水箱涵的安全性。     

长洲水利枢纽坝下航道维护新问题及对策分析

文章通过分析长洲水利枢纽坝下水文条件改变给航道维护带来的影响,介绍广西梧州航道管理局针对维护新问题所采取的对策,指出今后该航段航道维护应重点注意的事项。     

船舶压载水处理技术和监督管理研究

船舶压载水不仅危害海洋环境还会对人类健康、当地经济造成影响,《国际船舶压载水和沉积物控制和管理公约》实施即说明了国际社会对此的重视。压载水处理系统的使用,有效地减小了压载水对环境的危害。然而在实际应用中,仍需要通过提高和改进压载水监控技术,使处理后的压载水进一步符合公约标准。本研究根据我国压载水监控现状,提出完善压载水监督管理的措施,促进我国环境、经济和资源的可持续发展。     

从河床冲淤分析沉管法修建长江水下隧道问题

文章从三峡水库泥沙入库量的减少以及三峡水库对泥沙的拦截作用两个方面分析了三峡水库对长江中下游河床冲刷的影响,具体剖析了现有冲刷数值模拟的最大冲刷量远较实际冲刷量为小的原因,因此得出了在三峡以下长江中下游不宜采用沉管法修建长江水下隧道的结论。对于重庆地区朝天门两江隧道的修建方案问题,文章在分析了决定修建沉管隧道方案可行性的两个关键参数,即河床水深和水流流速后,指出只要采取相应工程措施,采用沉管法修建两江隧道是可行的。     

空气罐控制输液管道水击研究

采用特征线法对瞬时关闭管道终端阀门 ,在安装和不安装空气罐两种状况时 ,管道压力的变化情况进行了数值模拟 ,并分析了空气罐初始容积、空气罐安装位置等参数对管道瞬态水击压力变化的影响 ,结果表明 :在输液管道的适当位置安装容积一定的空气罐能较好地控制水击的产生     

如何防治公路建设中的水土流失

分析了公路建设中水土流失的原因，针对不同情况预测了可能产生水土流失的危害并提出了水土保持的措施。