压力钢带式无级变速器技术降低油耗的潜能分析(一)

为降低压力钢带式无级变速(CVT)车型的燃油消耗,将研究重点放在对其内部不同损耗源的分析上,并认为最有可能降低损耗的部分是压力钢带式CVT的变速机构、液压驱动回路及其控制策略。根据研究结果指出,通过采取诸如滑移控制、改进的液压回路、分离离合器或启动-停止控制等措施,压力钢带式CVT仍具有较大的降低油耗的潜力;今后的工作应着重于扩大CVT滑移控制的工作区域及将此功能应用于生产实际中。。     

Development of a retrofit layer with an embedded array of piezoelectric sensors for transient pressure measurement in maritime applications

Measurement of transient pressure distribution on maritime structures is important for the assessment of the hydrodynamic loads applied. The commonly used pressure sensors are mostly bulky, need to be bolted to the structure, and/or only provide point-wise measurements. In this paper, an elastic matrix layer with a network of embedded piezoelectric sensors is proposed to address these issues. For experimental validation, a 400 × 400 × 5 mm epoxy layer is fabricated embedding 25 piezoelectric sensors on a square grid in accordance with Gauss-Lobatto-Legendre points. A finite element based inverse procedure is developed to reconstruct the pressure field from the electric potentials measured by the piezoelectric transducers. Feasibility of the concept is evaluated by measuring and reconstructing the pressure field generated by a travelling wave in a water tank. Sensitivity of the layer is also investigated through the experiments. The results indicate that the retrofit layer is capable of pressure field reconstruction, and that the presence of disturbances on the sensing surface does not affect the measurements in a notable way, while non-ideal conditions of the mounting can have a significant impact on the accuracy of the measurements. The results highlight the potential of the concept in pressure distribution measurements.     

Efficient time-domain approach for hydroelastic-structural analysis including hydrodynamic pressure distribution on a moored SFT

This study investigates the hydroelastic analysis of a moored SFT (submerged floating tunnel) and the corresponding hydrodynamic pressure distribution under wave excitations. Time-domain discrete-module-beam (DMB) method, in which an elastic structure is modeled by multiple sub-bodies with beam elements, is employed to express the deformable tunnel with multiple mooring lines. Moreover, the top-down scheme is also adopted for detailed structure analyses with less computational cost, which applies the calculated hydrodynamic pressure distribution over SFT's surface to the three-dimensional finite element model. The hydrodynamic pressure includes both wave-induced diffraction pressure and motion-induced radiation pressure. For the validation of the developed numerical approach, comparisons are made with computationally intensive hydroelastic-structural direct-coupled method, two-dimensional wave flume experiment, and independently developed inhouse moored-SFT-simulation program. Furthermore, the influences of flexural motions with buoyancy-weight ratio (BWR) (or bending stiffness) and regular/irregular wave conditions on the dynamic pressure distribution and the resulting local stresses are investigated.