京沪线南翔牵引变电所有源无源混合补偿方案

介绍了采用低压侧两相式有源与无源混合补偿方案，可以有效降低补偿装置的补偿容量，减小补偿装置的体积，并将该方案实际应用于工程实践，仿真结果验证了补偿方案的正确性与有效性，该装置已投入运行，为新补偿方案在国内推广应用奠定了基础。     

A novel fuzzy logic correctional algorithm for traction control systems on uneven low-friction road conditions

The traction control system (TCS) might prevent excessive skid of the driving wheels so as to enhance the driving performance and direction stability of the vehicle. But if driven on an uneven low-friction road, the vehicle body often vibrates severely due to the drastic fluctuations of driving wheels, and then the vehicle comfort might be reduced greatly. The vibrations could be hardly removed with traditional drive-slip control logic of the TCS. In this paper, a novel fuzzy logic controller has been brought forward, in which the vibration signals of the driving wheels are adopted as new controlled variables, and then the engine torque and the active brake pressure might be coordinately re-adjusted besides the basic logic of a traditional TCS. In the proposed controller, an adjustable engine torque and pressure compensation loop are adopted to constrain the drastic vehicle vibration. Thus, the wheel driving slips and the vibration degrees might be adjusted synchronously and effectively. The simulation results and the real vehicle tests validated that the proposed algorithm is effective and adaptable for a complicated uneven low-friction road.     

Heavy duty vehicle rollover detection and active roll control

This paper presents the results of a comprehensive study on heavy-duty vehicle (HDV) roll stability improvement technology. The proposed rollover threat warning system uses the real-time dynamic model-based time-to-rollover (TTR) metric as a basis for online rollover detections. Its feasibility for implementation in a HDV rollover threat detection system is demonstrated through vehicle dynamic simulation studies. The research on the development of a rollover threat detection system is further enhanced in combination with an active roll control system using active suspension mechanism to improve heavy-duty trucks’ roll stability both in the static cornering and in emergency maneuvers. It has been demonstrated that the roll stability of typical heavy-duty trucks has been largely improved by the proposed active safety monitoring and control system.     

汽车智能化技术分析（Ⅰ）

现代汽车利用各种通信、网络、自动化等信息技术手段为人们提供各种舒适、安全、便捷、智能的服务,以实现更安全、更舒适、更便捷的汽车生活,这种技术称为智能化技术。本文通过对全球市场车型进行调查,总结出目前在售车型的所有先进智能化技术,并对各种技术进行逐一简述,分类归纳。     

一种宽频带有源带通滤波器的设计与实现

采用低噪声、高速率的AD797设计制作了一个中心频率为177kHz的8阶切比雪夫有源带通滤波器,介绍了滤波器的设计思想及实测中遇到的问题及解决方法。     

CEC条件下“标准6”舰空导弹

简述了CEC（协同作战能力）系统的组成、功能及“标准6”舰空导弹的基本特点和主要性能指标。分析了在CEC系统支持下,“标准6”舰空导弹的作战流程及作用。     

两种目标定位方法的误差分析

单站球坐标定位法和梯度法是目标定位中经常使用的2种方法.针对2种目标定位方法的定位精度问题,分别介绍了2种方法的原理及误差处理过程.通过理论分析和仿真计算对上述方法的目标定位精度进行比较,结果表明,梯度法比单站球坐标定位法具有更高的目标定位精度.     

舷外有源诱饵装备发展及作战使用现状

为提高我国电子战及导弹装备技术的作战使用水平,根据反导电子战装备发展的趋势,分析了国外舷外有源诱饵装备的发展情况,重点介绍了Nulh和SSQ-95舷外有源诱饵的组成和性能,分析了冲淡干扰、质心干扰和掩护干扰3种舷外有源诱饵作战使用的典型模式,提出了复合制导及“烧穿”等对抗舷外有源诱饵的基本措施。研究内容对我国反导电子战...     

高层建筑物地下室底板下的浅埋暗挖隧道内桩基托换技术应用

为实现深圳地铁1号和3号线老街站平行换乘,需在9层的永新商业城建筑物地下室下的软弱地基土层中扩建1个2层框架结构站台。首先自地下室底板下暗挖1条隧道揭示永新商业城5根桩基,并在隧道内采用连续梁形式对5根桩基（单桩最大重6 500 kN）同时实施主动托换。通过采用非线性数值分析软件ABAQUS对桩基主动托换各工况进行仿真模拟计算分析,在工程施工中通过量测数据的反分析精心指导施工,通过精细化施工组织保证了以连续梁形式同时主动托换多根桩同步顶升,最终确保了在该恶劣条件下桩基主动托换过程中上部建筑物沉降值控制在＋1～-1 mm。     

并联有源电力滤波器补偿性能的研究

研究了影响桥式整流带阻感型负载的并联型有源电力滤波器补偿性能的因素,从理论上分析指令延时和母线电压以及输出电感对补偿效果影响的具体原因,并通过Matlab软件建立仿真模型,借助仿真波形和THD数据证明了理论分析的正确性,最后根据实际工程需要合理优化了各个参数,并在一台50 KVA三相四线的并联电力有源滤波器样机上验证了该方法的实用性和有效性.