HX_D3型机车牵引电机故障的预防检查及办法探讨

自2009年3月份济南西机务段青岛地区配属HXD3型电力机车用于客运运输以来,青岛地区连续发生3起HXD3型机车牵引电机故障:1起窜轴,2起轴承固着。这些故障均由乘务员在机车运用过程中停车检查时发现,给正常安全运输生产带来极大的隐患。通过对上述故障的分析研究以及HXD3牵引电机与齿轮箱结构、电路控制等的分析,提出如何在大整备格局的生产布局下提前发现和预防该故障的机理、思想和方法,以最大程度的降低其对生产运输的影响。     

广州地铁4号线列车EP2002制动系统介绍及故障分析

对广州地铁4号线列车EP2002制动控制系统特点进行了简要描述,详细介绍4号线列车EP2002制动系统各项功能,对EP2002阀之间的通讯,以及EP2002阀同列车线、TMS和VVVF之间的通讯进行了介绍,结合列车在运营中出现的故障进行了分析。     

104型分配阀制动性能不良问题的分析及探讨

通过分析长沙车辆段2009年两制动室检修的104型分配阀返修原因及运用客车制动阀性能不良的故障现象,提出了104型分配阀检修及试验的改进措施。     

谈柴油机废气涡轮增压器的正确使用及故障分析

简要介绍了柴油机废气涡轮增压器的基本工作原理。阐述了对柴油机增压器的正确使用、维护以及常见故障分析。     

沥青路面填封裂缝和修补坑槽再破损原因分析

为了检验沥青路面裂缝填封和坑槽修补的效果,对填封裂缝和修补坑槽较常出现的再破损形式进行了归纳,并深入地分析了已填封裂缝和已修补坑槽再次出现破损的原因.     

大断面地铁车站隧道软弱围岩渐进破坏规律模型试验研究

以贵阳市地铁2号线阳明祠车站为背景,采用室内模型试验模拟大断面地铁车站施工过程中隧道塌方破坏过程,明确施工期间大断面隧道塌方破坏过程机制,对比分析围岩和路面的变形。结果表明:通过围岩重力作用模拟隧道施工过程中塌方过程,与实际塌方过程基本吻合,弥补了常规加载破坏的不足;围岩渐进破坏过程表现为裂隙出现-裂隙发展-裂隙贯通-围岩塌方,支护渐进破坏过程表现为变形缓慢增加-变形快速增加-裂缝快速发展-支护破坏;围岩渐进破坏与支护渐进破坏相互作用,共同发展;在实际施工过程中,当支护变形大幅增加时,应增加支护强度,同时还应及时注浆、打设长锚杆,以减缓围岩裂隙发展,阻断围岩渐进破坏过程。     

浅埋顶管沉井周边土体的三维破坏形状及沉降研究

为研究顶管沉井及周边土体在顶进力作用下的形变范围与大小，以加固旋喷桩作为沉井周围加固体建立ABAQUS软件计算模型，并将模拟结果与工程实例、PLAXIS 3D软件所得结果进行对比分析。同时，采用广州地区花岗岩残积土进行室内沉井模型试验，并通过试验结果对数值模拟结论进行验证，得出结论如下： 1）在开挖基坑前达到设计强度的旋喷桩能有效减小基坑周边土体塌陷变形、坑底隆起。2）在施加工作顶推力下，前侧主动区首先出现贯通裂缝，竖向位移斜率增大出现明显拐点；继续增大顶推力，土体位移会急剧增大导致地表沉降严重。3）对于后背土体，在顶推力作用下，地表破裂线的切线角度从0°逐渐增大至45°+φ/2，导致破裂范围也不断扩大；达到45°+φ/2处后，继续施加顶推力会导致短轴方向破坏范围扩大的速度较长轴方向的速度更快；三维空间中被动区破坏土体在地表处产生形状为椭圆的破坏面，椭圆长轴方向为顶推轴线方向，被动破坏体呈现为牛角状椭圆楔体。     

Travel time estimation oriented freeway sensor placement problem considering sensor failure

Optimal sensor placement on freeway corridor is of great interest to transportation authorities. However, current traffic sensors are easily subject to various failures. Therefore, it is necessary to incorporate sensor failure into the optimal sensor placement model. In this article, a two-stage stochastic model is proposed for the purpose of travel time estimation on freeway corridor. To balance the effectiveness and reliability, a stochastic conditional value at risk (CVaR) model is also proposed. Since both models are too complicated, a customized genetic algorithm is developed. Numerical experiments show that considering sensor failure makes a significant performance improvement in the sensor placement pattern. Sensitivity analysis is also applied to investigate the impact of a number of allowable sensors and different traffic sensor failure probability.     

Effect of ABCA1-V771M polymorphism on plasma lipid levels and its relationship with coronary atherosclerotic heart disease

Objective To explore the risk association of ABCA1-V771M polymorphism with coronary heart disease (CHD) in Hart nationality in Northwest of China. Methods With case-control study, ABCA1-V771M polymorphism was detected in 204 unrelated Hart nationality people in Northwest of China, and all the subjects by coronary angiography were grouped into 106 cases and 98 controls. The genotypes and alleles frequency distribution of ABCA1-V771M polymorphisms were analyzed by PCR-RFLP analysis, and the clinical statistics of serum lipids were compared and its effects of ABCA1-V771M polymorphism on the plasma lipid levels and coronary atherosclerotic heart disease were analyzed. Results The genotypic frequencies of ABCA1-V771M polymorphism matched well under Hardy-Weinberg equilibrium (P>0.05), V and M allelic frequencies were 33.3% and 66.7%. In comparison with VV VM genotype carriers, MM genotypes carriers had much lower plasma levels of HDL-C (P<0. 001) and much higher plasma levels of TG (P<0. 05). M allelic frequency in CHD group was significantly higher than V allelic frequency (P<0. 05). M allele was related with more severity of atherosclerosis in the coronary artery than V allele (P<0.05). However, there was no obvious difference in the incidence of AMI among carriers with three genotypes of ABCA1-V771M polymorphism (P>0.05). Conclusion ABCA1-V771M polymorphism was not only associated with the plasma levels of HDL-C and TG, but also related to the susceptibility and severity of coronary atheroselerotic heart disease. Moreover, M771 allele appeared to be atherogenie among Han population in Northwest of China.     

基于多种失效模式SPS复合钢板替换船用钢板的优化设计

在SPS复合钢板的设计中获取不同的失效模式。以减重为目标,应用序列二次规划法对SPS复合钢板进行等效船用钢板的优化设计,同时对SPS复合钢板进行多目标优化,应用层次分析法定各目标的权重。在这两种优化方法的基础上,对船用钢板与SPS复合钢板进行了屈曲、弯曲对比数值分析,同时将结果与理论计算结果对比分析。结果表明,SPS复合钢板重量能够减轻37%以上,刚度增加两倍多,但厚度增加70%。