改良膨胀土施工工艺参数研究

通过西安南京铁路合肥南京段高速铁路膨胀土试验段的施工过程控制,对含水量、含灰率,石灰颗粒粒径、改良土颗粒粒径、松铺系数、碾压遍数等施工工艺参数进行了详细的研究。对指导今后高速铁路膨胀土施工有一定的实用价值。     

土体参数对基坑变形影响的正交试验研究

利用正交试验方法研究了弹性模量、泊松比、内摩擦角、粘聚力等四个土体主要物理参数对支挡物水平位移、坑底最大隆起量、地面最大沉降等基坑开挖变形效应的影响程度。通过正交化设计将256次FLAC3D数值试验，简化设计为16次试验;应用FLAC3D三维有限差分软件对这16种情况进行计算，得出了每种情况下基坑开挖的变形效应。正交试验结果得出了各个参数在影响基坑开挖效应中所占的权重，对基坑工程的预测和支护设计起到了指导作用，并为土体参数反演问题提供了依据。     

WJ-8型小阻力扣件轨下橡胶垫板滑出动力学研究

基于轨下胶垫滑出后扣件支撑刚度减小和轮轨系统动力学基本原理,建立车辆-轨道-桥梁垂向耦合动力学模型,计算分析轨下胶垫滑出对车辆与轨道结构的动力学性能的影响,得出以下结论:(1)随着轨下胶垫滑出量的增加,车辆与轨道结构的振动加速度、钢轨与道床板的垂向位移、最大轮轨力、减载率均有增大趋势;最小轮轨力有减小趋势;且随着轨下胶垫滑出量的增加,车辆以及轨道结构的动力学指标的变化趋势逐渐增大。(2)基于车辆以及轨道结构的动力学指标,轨下胶垫滑出量不宜大于120 mm。     

接触网参数对接触网风致响应的影响及风洞试验验证

大风作用会使接触网发生更大更复杂的振动与风偏,为给大风区接触网的防风设计提供科学依据,采用有限元计算与风洞试验相结合的方法进行研究。利用ANSYS软件建立包括支撑结构和悬挂部分的有限元耦合模型;采用谐波合成法(WAWS)模拟针对接触网结构特点的脉动风场;通过计算不同接触网参数组合方案在风荷载下的风致响应位移,定量分析得出悬挂类型、张力组合、跨距对接触网风致响应的影响。接触网气动弹性风洞试验结果表明,接触网参数对风致响应的影响的研究结果正确。研究成果应用于兰新铁路第二双线大风区接触网系统方案设计和技术参数选择,并作为主要理论支撑之一,形成了首个国内外铁路电化行业的风区接触网装备技术条件。     

装配式PC箱梁刚度退化及识别的足尺试验

为了明确装配式预应力混凝土（PC）梁刚度在损伤状态下的退化规律，针对3片30 m预应力混凝土箱梁开展了足尺模型试验研究。首先，建立了损伤梁的结构静动刚度识别模型，基于跨中挠度提出了结构等代静刚度计算式，基于自振频率提出了结构等代动刚度的计算式；其次，对足尺箱梁进行了多工况的静力逐级加载和动力交替试验，分析了箱梁裂缝、挠度、频率等特征参数随荷载的演化规律，研究了损伤状态对箱梁特征参数的影响；再次，通过有限元模型修正给出了箱梁动刚度衰减系数，研究了结构静动刚度随损伤状态的衰减规律，分析了静动刚度差异的原因；最后，建立了结构静动刚度衰减系数和裂缝特征参数之间的经验回归式，并与现有研究成果进行了对比。结果表明：初始损伤状况对箱梁受荷后的裂缝统计分布特征参数有一定影响；箱梁开裂后在相同荷载下的结构等代静、动刚度衰减程度并不相同，其中最终的静刚度衰减系数为0.30，最终的动刚度衰减系数为0.80；足尺梁与室内缩尺模型梁的静刚度衰减系数并不相同。所提出的静、动刚度衰减公式较为简洁，可用于实际损伤箱梁的结构性能评估。     

Identification of dynamic parameters in low-mobility mechanical systems: application to short long arm vehicle suspension

The identification of dynamic parameters in low-mobility mechanical systems is addressed and applied to short long arm (SLA) front car suspension. The main goal of the identification technique is to obtain, from experimental measurements, the values of those dynamic parameters (masses, location of the centre of masses, terms of the inertial matrix of the links, constant friction terms and elastic and viscous damping constant terms) that affect the dynamic behaviour of the system. Moreover, additional but important information that could be obtained from the procedure is related to the weight of those terms inside the dynamics of the system, so that simplified dynamic models based on relevant and well-identified parameters can be established. First, a systematic procedure will be presented for obtaining the equations of motion in a linear form with regard to the dynamic parameters to be identified. The main drawbacks related to the identification of parameters in low-mobility mechanisms will be pointed out, mainly the difficulty of determining a natural cutoff point into the singular values of the observation matrix which allows us to determine the true dimension of the set of base parameters and of obtaining an observation matrix well conditioned from the numerical point of view that allows an identification in the presence of measurement error. The procedure proposed for overcoming these problems will be based on the development of symbolic relationships among the physical parameters in order to determine the true rank of the observation matrix and on the consideration of a reduced subset of the base parameters set. These relevant parameters will be selected according to their influence on the dynamic behaviour of the mechanical system. A virtual benchmark will be used for testing purposes. The dynamic models based on relevant parameters show a better adjustment than the complete ones, mainly when the level of noise in the measurements used in the identification process increases.     

四次Bézier曲线形状调整方法

分析已有的带形状调节参数的扩展Bézier基生成的曲线的方法,提出带调节参数的控制点变换阵的调整曲线形状的方法.其原理是通过将原来的Bézier曲线的控制点变换为新的一组控制点,进而生成新的Bézier曲线.这组控制点的位置与参数相关联,几何意义明显.     

填石路堤强夯加固施工参数及路基动应力响应规律研究

贵州西部山区的高速公路常采用高填石路堤,强夯法是控制高填石路堤填筑质量的有效方法之一。为确定填石路堤的强夯加固施工技术参数、探讨强夯冲击能量作用下填石路堤内部动应力响应规律,通过现场试验和FLAC3D数值模拟进行研究。采用动土压力盒、位移观测元件,测试强夯冲击能量作用下的动应力以及夯坑沉降量、夯锤周边地表变形等数据,并将现场测试结果与数值模拟结果进行对比分析。研究结果表明:在夯击能量3 000 kN·m下,强夯加固单点夯击次数为12击、夯点间距为4.5 m;强夯作用下填石路堤内部动应力峰值随深度呈指数形式衰减,并且根据动应力峰值的随深度衰减曲线,获得了夯击能量3 000 kN·m下填石路堤强夯有效加固深度为5.0 m。研究结果可为类似工程确定强夯加固施工参数及有效加固深度提供指导。     

复杂地质条件下TBM刀具失效形式及原因分析与应对措施

为研究分析复杂地质条件、不合理掘进参数等与TBM刀具异常损坏、刀具消耗的关系，以利于TBM掘进效率和施工成本的控制，在系统阐述TBM刀具常见失效形式的基础上，研究分析总推力、刀盘转速、刀具贯入度等掘进参数及不同围岩单轴抗压强度、石英质量分数等地质参数对刀具磨损及异常损坏的影响规律。以引汉济渭秦岭隧洞和中天山隧道工程为例，对刀具消耗及失效形式进行统计分析，并从刀具选型、检查及维修等方面，提出针对性的优化方法。最后，基于目前刀具配置及监测技术存在不足的现状，提出应进一步研发刀间距可调的刀具配置技术，以确保不同地质条件下的刀具破岩效率；同时，加强对TBM工作环境具有较强适应性的新型刀具状态监测系统的研发及应用。     

Driving cycles that reproduce driving patterns,energy consumptions and tailpipe emissions

This study presents the Energy Based Micro-trip (EBMT) method, which is a new method to construct driving cycles that represent local driving patterns and reproduce the real energy consumption and tailpipe emissions from vehicles in a given region. It uses data of specific energy consumption, speed, and percentage of idling time as criteria of acceptable representativeness. To study the performance of the EBMT, we used a database of speed, fuel consumption, and tailpipe emissions (CO₂, CO, and NO_x), which was obtained monitoring at 1 Hz, the operation of 15 heavy-duty vehicles when they operated within different traffic conditions, during eight months. The speed vs. time data contained in this database defined the local driving pattern, which was described by 19 characteristic parameters (CPs). Using this database, we ran the EBMT and described the resulting driving cycle by 19 characteristics parameters (CPs*). The relative differences between CPs and CPs* quantified how close the obtained driving cycle represented the driving pattern. To observe tendencies of our results, we repeated the process 1000 times and reported the average relative difference (ARD) and the interquartile range (IQR) of those differences for each CP.. We repeated the process for the case of a traditional Micro-trip method and compared to previous results. The driving cycles constructed by the EBMT method showed the lowest values of ARDs and IQRs, meaning that it produces driving cycles with the highest representativeness of the driving patterns, and the best reproduction of energy consumption, and tailpipe emissions.