浅谈质量体系内部审核采用成熟度评价的必要性

质量管理体系内审是组织进行质量体系管理自我完善的重要手段之一,一直以来通常采用符合性评价的方式,评价结束给的评价结论一般是定性的,如符合、基本符合和有效、基本有效;无法用一个量化的数据真实反映组织质量管理体系整体运行的成熟度.那么如何开发一套质量体系评价管理方法,采用量化的数据进行质量管理体系成熟度评价,全面掌握组织质...     

宝马车系诊断设备及电控发动机的重点组成部件

介绍宝马发动机电控系统诊断信息、车间诊断设备、电控发动机的重点组成部件。     

Fuzzy and adaptive fuzzy control for the automobiles’ active suspension system

Two typical criteria for good vehicle suspension performance are their ability to provide good road handling and increased passenger comfort. The main disturbance affecting these two criteria is terrain irregularities. Active suspension control systems reduce these undesirable effects by isolating car body motion from vibrations at the wheels. This paper describes fuzzy and adaptive fuzzy control (AFC) schemes for the automobile active suspension system (ASS). The design objective is to provide smooth vertical motion so as to achieve the road holding and riding comfort over a wide range of road profiles. The efficacy of the proposed control schemes is demonstrated via simulations. With respect to the optimal linear quadratic regulator (LQR), it is shown that superior results have been achieved by the AFC.     

Enhancing grey prediction fuzzy controller for active suspension systems

A grey prediction fuzzy controller (GPFC) was proposed to control an active suspension system and evaluate its control performance. The GPFC employed the grey prediction algorithm to predict the position output error of the sprung mass and the error change as input variables of the traditional fuzzy controller (TFC) in controlling the suspension system to suppress the vibration and the acceleration amplitudes of the sprung mass for improving the ride comfort of the TFC used; however, the TFC or GPFC was employed to control the suspension system, resulting in a large tire deflection so that the road-holding ability in the vehicle becomes worse than with the original passive control strategy. To overcome the problem, this work developed an enhancing grey prediction fuzzy controller (EGPFC) that not only had the original GPFC property but also introduced the tire dynamic effect into the controller design, also using the grey prediction algorithm to predict the next tire deflection error and the error change as input variables of another TFC, to control the suspension system for enhancing the road-holding capability of the vehicle. The EGPFC has better control performances in suppressing the vibration and the acceleration amplitudes of the sprung mass to improve the ride quality and in reducing the tire deflection to enhance the road-holding ability of the vehicle, than both TFC and GPFC, as confirmed by experimental results.     

An Original Feedback Control with a Reversible Electromechanical Actuator Used as an Active Isolation System for a Seat Suspension. Part I: Theoretical Study

This paper provides an overview of a theoretical study of an active seat suspension. The principal objective of this study is to improve ride passenger comfort by reducing transmitted seat acceleration. The seat is represented by a non-linear two degree of freedom model. The system is linearized for small perturbations around the equilibrium. To control the dynamic of the seat suspension, an original feedback control command with a reversible electromechanical actuator is achieved. The synthesis of the regulator is realized on the linearized model of the seat suspension and the root locus method is employed. Stability and robustness characteristics have been studied. Numerical simulations in time and frequency domain show the interests of the regulator and its capability to isolate seat passenger.     

Prediction of wheel wear in urban railway transport: comparison of existing models

One of the most important maintenance costs in tramway transport comes from wear of wheel profiles. In the highly competitive railway market, the prediction of wear is then a major concern of the constructors. In this article, we present and compare four models well adapted to tramway conditions, involving contacts on the rolling tread and on the flange with very different sliding and pressure conditions. Moreover, all models can be implemented from the natural outputs of the railway simulation packages classically used in industry for the dynamics design of the vehicles. The first one, proposed by Jendel, is based on the well-known Archard's wear model. Enblom continues Jendel's approach by taking into account the contribution of wheel deformation on the sliding velocity. The last two models, developed by Zobory, and Pearce and Sherratt, determine the wear from the energy dissipation in the contact area. The models are first compared on a theoretical basis and, for that purpose, are rewritten in a common form. Two cases are distinguished: mild wear as arising on the rolling tread and severe wear as arising on the flange. The models are also compared in the practical case of an urban transport vehicle running on circular tracks with different curve radii. Although the models show equivalent trends according to the theoretical study, important discrepancies appear between estimated wear depths. All models are actually dependent on experimental coefficients and it is likely that they were estimated in different conditions. On the other hand, a reasonable agreement can be found in some particular conditions. As an example, Zobory's, Enblom's and Jendel's models are very close to each other in severe wear conditions. This work shows that a general and reliable model could probably be developed from all positive aspects of the existing ones.     

Fault-tolerant control of heavy-haul trains

The fault-tolerant control (FTC) of heavy-haul trains is discussed on the basis of the speed regulation proposed in previous works. The fault modes of trains are assumed and the corresponding fault detection and isolation (FDI) are studied. The FDI of sensor faults is based on a geometric approach for residual generators. The FDI of a braking system is based on the observation of the steady-state speed. From the difference of the steady-state speeds between the fault system and the faultless system, one can get fault information. Simulation tests were conducted on the suitability of the FDIs and the redesigned speed regulators. It is shown that the proposed FTC does not explicitly worsen the performance of the speed regulator in the case of a faultless system, while it obviously improves the performance of the speed regulator in the case of a faulty system.     

基于计算机自动控制技术的多探头测深系统研制与改造

通过加装控制盒的方式,实现单探头测深仪与自动控制探头之间的流畅切换,将传统单探头测深仪改造成具有多探头功能的高效水下测量仪器系统,主要用于航道和码头基床等的水下扫测。利用该系统进行的码头基床扫测已经取得成功,可为同类测量设备的改造提供全新的思路。     

CJBW10舰船微机监控报警系统

介绍一种新型的舰船用微机监控报警系统，该系统采用先进的微机网络技术和单片机技术，将高分辩率彩色ＣＲＴ测点参数和图形显示功能，报警灯板板功能和记录打印功能以及控制功能集于一块单板上，并通过网络与测量单元相闻，既可在网络型船舶自动化系统中作这联网的机舱监控报     

Development of a hull form definition tool with a related knowledge-based advisory system

The development of a parametric hull form design system utilizing combined knowledge-based and objectoriented methodologies, approaches, and techniques is the major purpose of this research. One objective was the development of a powerful, intuitive, and parameter-based hull definition system with a related hull definition advisory system that would provide useful and necessary advice to the user. Object and knowledge modeling activities were conducted during the analysis and design stage to facilitate the implementation of a hull design program and advisory system. The hull design system includes the generation of a geometric model from a process of aggregating simple user-selected shapes representing different boundaries. Design involves the capability to vary simple parameters such as entrance angles, length-breadth ratios, and radii to define local and general surface geometries. Hydrostatic calculations are included for analysis; results are referred to an advisory system for evaluation and the determination of the acceptability of parameters and analysis results. The advisory system includes a knowledge bases consisting of hull form databases, results of the statistical analysis of data, design parameter constraints, and expert knowledge acquired from designers, reference materials, and technical reports. Use of the design tool with the advisory system results in the rapid generation of hull forms and associated design evaluations. Flexibility in decision making results from the separation of the design system from the advisory system. The independence of the two systems allows for a wide range of user experience with experts using the design tool with minimal reference to the advisory system. On the other hand, the expertise and knowledge stored in the advisory system is fully available to inexperienced designers and users.