隧道爆破荷载作用下中隔壁动力响应与破坏机理研究

中隔壁结构作为隧道初期支护体系中重要的承载构件,在隧道爆破荷载作用下极易发生损伤开裂和破坏。首先依托双向八车道的港沟高速公路隧道工程,进行爆破荷载作用下中隔壁的动力损伤破坏试验,提出中隔壁支护结构的破坏形态及类型;然后利用ANSYS/LS-DYNA建立隧道爆破与中隔壁支护结构数值模型,采用流固耦合的方法模拟岩体爆破及中隔壁支护结构的动力响应,并考虑单段装药量、爆距等不同因素,研究其对中隔壁破坏模式及形态的影响。研究结果表明：隧道爆破荷载作用下中隔壁破坏形式分为背爆侧混凝土开裂剥落、中心区域混凝土震塌成洞、钢筋网及纵向连接钢筋震坏断裂、钢拱架发生扭曲变形4种类型;中隔壁支护结构在爆破应力波的作用下处于反复拉压状态,并在岩石破碎抛掷冲击的作用下发生破坏,且中隔壁支护结构中心、顶部和底部是结构最易发生损伤的部位;单段装药量和爆距的改变会对中隔壁支护结构的破坏范围和破坏程度产生影响,且结构呈现出不同的破坏形态,与现场试验结果一致;建议隧道爆破施工时爆距控制在40 cm以上,单段药量控制在7.2 kg以下,以减少对中隔壁支护结构的破坏。     

PHEV发动机驱动工况效率耦合分析与优化控制

单轴并联式混合动力系统（Parallel Hybrid Electric Vehicle,PHEV）包括电池、驱动电机、发动机、自动变速器等多个关键部件。各部件效率特性存在相互耦合的关系,要实现系统整体效率最优,需要辨明影响系统效率的控制参数,并对系统整体效率最优的控制参数进行优化。以装备无级变速器（Continuously Variable Transmission,CVT）的PHEV为研究对象,首先对系统各关键部件的效率特性进行分析,建立各关键部件效率模型,明确各部件效率与控制参数、状态参数之间的关系。在此基础上,对发动机单独驱动模式下动力传递路径中不同部件的效率耦合关系进行分析,推导出系统燃油消耗量与动力系统各状态参数、控制参数之间的函数关系。根据分析结果,选取车辆需求功率及车速为状态参数,变速器速比及发动机转矩为控制参数,以系统燃油消耗量最小为目标建立优化目标函数和约束条件,对系统优化问题进行定义。根据优化问题的特点,设计基于模拟退火的优化算法对优化问题进行求解,获取系统燃油消耗率最小时变速器目标速比和发动机目标转矩随状态参数的变化关系。建立系统仿真模型对所述优化算法进行仿真分析,并搭建混合动力试验台对优化结果进行试验验证。结果表明：无级变速器效率对系统整体效率影响较大,采用优化控制规律使发动机效率有所降低,但无级变速器效率升高更大,系统整体效率升高;在功率需求一定的循环工况下,优化控制算法比传统上仅以发动机效率最高为目标的控制算法节油1%~2%。     

AIS与VTS的雷达／ARPA信息融合的研究与实现

分析了信息融合的必要性,并在信息融合基本原理的基础上,提出了信息融合的步骤,采用模糊数学中正态型隶属度函数算法实现AIS与VTS的雷达/ARPA信息融合,解决了不同设备处理同一信息的差异问题。     

Multi‐objective highway alignment optimization using a genetic algorithm

The available highway alignment optimization algorithms use the total cost as the objective function. This is a single objective optimization process. In this process, travel‐time, vehicle operation accident earthwork land acquisition and pavement construction costs are the basic components of the total cost. This single objective highway alignment optimization process has limited capability in handling the cost components separately. Moreover, this process cannot yield a set of alternative solutions from a single run. This paper presents a multi‐objective approach to overcome these shortcomings. Some of the cost components of highway alignments are conflicting in nature. Minimizing some of them will yield a straighter alignment; whereas, minimizing others would make the alignment circuitous. Therefore, the goal of the multiobjective optimization approach is to handle the trade‐off amongst the highway alignment design objectives and present a set of near optimal solutions. The highway alignment objectives, i.e., cost functions, are not continuous in nature. Hence, a special genetic algorithm based multi‐objective optimization algorithm is suggested The proposed methodology is demonstrated via a case study at the end.     

基于蚁群算法和群决策理论的动态路径优化研究

文章针对城市交通信号控制中的动态路径优化问题,综合考虑相邻交叉口间距和路段交通饱和度两个参数的影响,提出了一种基于蚁群算法和群决策理论的动态路径优化算法模型,并通过仿真实验,对比分析了该算法模型的有效性。     

Foldable container in empty container repositioning in intermodal transportation network of Belt and Road Initiative: strengths and limitations

In 2013, the concept of the ‘Silk Road Economic Belt and the 21st-Century Maritime Silk Road (Belt and Road)’ was initiated by the Chinese government, which involves Asian, European and African continents and their adjacent seas. Logistics plays a core role in such a large framework of economy and trade. In recent years, China, European Union, and Southeast Asia pay much attention to the design and development of the intermodal transportation network towards both economic and environmental efficiency. In this paper, we propose an empty container repositioning model in the intermodal transportation network of Belt and Road (B&R) Initiative by considering both standard and foldable containers. In this model, empty containers are repositioned from the inland of the original area, such as China, to other areas of B&R Initiative related countries and regions, such as European Union and Southeast Asia. We develop a mixed integer linear programming model to determine the optimal repositioning of empty containers via the intermodal transportation network. An Artificial Bee Colony algorithm is developed to solve large size problems in practice and numerical experiments are conducted to show the efficiency of our proposed algorithm. We provide managerial insights regarding the impact on the network performance of foldable containers transportation.     

Direct formulation and algorithms for the probit-based stochastic user equilibrium traffic assignment problem

This paper proposes simple and direct formulation and algorithms for the probit-based stochastic user equilibrium traffic assignment problem. It is only necessary to account for random variables independent of link flows by performing a simple transformation of the perceived link travel time with a normal distribution. At every iteration of a Monte-Carlo simulation procedure, the values of the random variables are sampled based on their probability distributions, and then a regular deterministic user equilibrium assignment is carried out to produce link flows. The link flows produced at each iteration of the Monte-Carlo simulation are averaged to yield the final flow pattern. Two test networks demonstrate that the proposed algorithms and the traditional algorithm (the Method of Successive Averages) produce similar results and that the proposed algorithms can be extended to the computation of the case in which the random error term depends on measured travel time.     

基于AIGA-WLSSVM的埋地管道腐蚀速率预测方法

为了降低埋地管道腐蚀影响因素之间的复杂相关性,提高腐蚀预测精度,文中提出一种基于自适应免疫遗传算法-加权最小二乘支持向量机(AIGA-WLSSVM)的埋地管道腐蚀速率预测建模方法,并采用AIGA优化模型参数,进一步提高模型的学习能力和稳定性。最后通过实例分析验证了AIGA-WLSSVM建模方法在埋地管道腐蚀速率预测中的可行性和有效性,为埋地管道的检修与更换提供参考。     

基于完全耦合算法的绕水翼流固耦合特性研究

基于完全耦合算法对绕二维NACA0009水翼流固耦合特性进行了数值模拟研究。采用Theodorsen模型和Munch模型对刚性和弹性水翼的水弹性响应进行了数值计算,分析了流体与结构的相互作用关系,研究了影响结构水弹性响应和流固耦合特性的因素。研究结果表明:考虑了流体黏性的Munch模型与基于势流理论的Theodorsen模型对气动弹性响应的数值计算结果基本一致,而Theodorsen模型由于没有考虑流体黏性在一定程度上低估了结构的水弹性响应。结构的惯性、阻尼和刚度力矩与流体的相应附加载荷均处于同一数量级,故流体与结构的相互作用不可忽略,尤其对于弹性水翼,流体的惯性、附加阻尼作用增大,流固耦合算法的数值稳定性对流固耦合特性的计算结果影响将更大。外部激励频率为非共振频率时,结构的刚度作用是影响水弹性响应的主要因素,外部激励频率为共振频率时,流体的附加阻尼和附加刚度作用减弱,除结构的刚度作用外,流体与结构的惯性作用对水弹性响应和流固耦合特性的影响也较大。     

整体温差作用下高桩码头基桩内力计算方法

为研究高桩码头完建后整体温差对基桩内力的影响,结合工程实例,建立三维有限元模型,对上部平台温变规律进行分析,认为斜桩、直桩对上部平台温变约束作用均可忽略不计,平台处于自由温变状态,存在水平位移为零的温变发散中心。基于刚性平台自由温变规律,提出了考虑斜桩码头平动扭转的三维算法,三维算法的桩顶位移、内力与有限元结果接近。对于全直桩或近似对称的斜桩码头,还可简化为平动的二维算法。并给出了直桩、斜桩内力的估算简式,由估算式可知,位于发散同心圆上的直桩内力大于斜桩内力,桩顶轴力、弯矩与桩径2次、4次方成正比,桩径对温差内力的影响显著。