运梁河特大桥转体梁不平衡重称重试验分析

哈大客专运粮河特大桥跨既有线连续梁采用平转法施工,为确保转体顺利进行,转体前进行了T构不平衡重试验分析,文中介绍了一种转体构件不平衡重的测试方法和应用过程。结果表明,方法有效可行,可供同类工程借鉴。     

Comparing different contour methods with response-based methods for extreme ship response analysis

Environmental contours are often applied in probabilistic structural reliability analysis to identify extreme environmental conditions that may give rise to extreme loads and responses. They facilitate approximate long term analysis of critical structural responses in situations where computationally heavy and time-consuming response calculations makes full long-term analysis infeasible. The environmental contour method identifies extreme environmental conditions that are expected to give rise to extreme structural response of marine structures. The extreme responses can then be estimated by performing response calculations for environmental conditions along the contours.Response-based analysis is an alternative, where extreme value analysis is performed on the actual response rather than on the environmental conditions. For complex structures, this is often not practical due to computationally heavy response calculations. However, by establishing statistical emulators of the response, using machine learning techniques, one may obtain long time-series of the structural response and use this to estimate extreme responses.In this paper, various contour methods will be compared to response-based estimation of extreme vertical bending moment for a tanker. A response emulator based on Gaussian processes regression with adaptive sampling has been established based on response calculations from a hydrodynamic model. Long time-series of sea-state parameters such as significant wave height and wave period are used to construct N-year environmental contours and the extreme N-year response is estimated from numerical calculations for identified sea states. At the same time, the response emulator is applied on the time series to provide long time-series of structural response, in this case vertical bending moment of a tanker. Extreme value analysis is then performed directly on the responses to estimate the N-year extreme response. The results from either method will then be compared, and it is possible to evaluate the accuracy of the environmental contour method in estimating the response. Moreover, different contour methods will be compared.     

桥墩及桩基形式对墩底平转施工转盘设计的影响

以新建福厦(福州—厦门)高速铁路17500 t转体刚构为背景,采用实体有限元方法分析了不同桥墩类型及桩基布置对墩底平转转体中转盘受力的影响,并对桥墩及桩基进行了优化。结果表明:实体墩对上转盘受力最有利,其次是空心墩,最不利的是双薄壁墩;增加墩底实体段能够有效降低空心墩、双薄壁墩上转盘的主拉应力;随着墩底实体段高度的增加,主拉应力降低的幅度逐渐变小;球铰正下方有桩基时对下转盘底部受力更加有利;距离球铰中心越远,桩基受力越小,适当增加中桩桩径,可使各桩基应力状态更加均衡。     

车辆隔热壁K值计算中空气层的处理方法

对轨道交通车辆多层复合结构的隔热壁进行隔热性能理论计算与仿真计算的对比,对隔热壁内部空气层的隔热性能进行分析。结论为:在车辆多层复合结构的隔热壁K值计算中,当空气层厚度大于一定厚度时,流体自然对流对隔热壁的隔热性能影响较大。利用多项式密度(Polynomial Denisity)和Boussinesq模型两种算法,对所得结论进行了验证。     

Solving the gate assignment problem through the Fuzzy Bee Colony Optimization

In the field of Swarm Intelligence, the Bee Colony Optimization (BCO) has proven to be capable of solving high-level combinatorial problems, like the Flight-Gate Assignment Problem (FGAP), with fast convergence performances. However, given that the FGAP can be often affected by uncertainty or approximation in data, in this paper we develop a new metaheuristic algorithm, based on the Fuzzy Bee Colony Optimization (FBCO), which integrates the concepts of BCO with a Fuzzy Inference System. The proposed method assigns, through the multicriteria analysis, airport gates to scheduled flights based on both passengers’ total walking distance and use of remote gates, to find an optimal flight-to-gate assignment for a given schedule. Comparison of the results with the schedules of real airports has allowed us to show the characteristics of the proposed concepts and, at the same time, it stressed the effectiveness of the proposed method.     

Dynamic loading history and collapse analysis of the pipe during deepwater S-lay operation

In the deepwater S-lay operations depending on the required stinger radius and rollers configuration, relatively large plastic deformation is induced when the pipe passes over the stinger, under the combined loadings of bending, axial tension, roller reaction force and the pipelay vessel motion. The resulting plastic deformation does not vanish after the pipe leaves the stinger. It accumulates until the pipe reaches the seabed. The inherited residual deformation might reduce the collapse capacity of the pipe under the external pressure loading. The present paper investigates the dynamic loading history of the pipe during the S-lay operation based on a test-verified finite element model, and then calculates the residual plastic deformation of the pipe cross-section after the pipe reaches the seabed. Finally, the nonlinear collapse analysis is implemented based on the modified RIKS method to evaluate the capacity of the installation-induced deformed pipe. The results confirm that the deepwater S-lay operation will lead to obvious plastic deformation of the pipe, which decreases the pipe collapse capacity to some extent.     

Towards a model of hydrodynamic damping for a circular cylinder with helical strakes at low KC

This paper investigates the hydrodynamic damping of a circular cylinder with helical strakes at Keulegan-Carpenter (KC) number from 0.07 to 3 in the presence of steady currents. Experiments were performed with a straked cylinder oscillating in either in-line or cross currents over Reynolds number (based on the oscillating velocity amplitude) varying from 1260 to 54,000. With in-line current being present, the measured drag coefficients of the straked cylinder are found to depend on the ratio between the oscillating velocity amplitude and the steady current velocity. This phenomenon is further confirmed by computational fluid dynamics using large-eddy simulations. The drag coefficients obtained from the numerical simulations agree well with the experimentally determined values. Similar phenomenon is observed for the cases with cross background current. Based on the experimental data, empirical formulae are proposed to evaluate drag coefficients. These results are of importance in estimating the resonant motion and the fatigue life of risers, e.g. water intake risers, in the flow regime of low KC. Finally, recommendations are provided for fatigue analysis of risers with helical strakes from the perspective of engineering practice.     

Probabilistic fatigue analysis of marine structures using the univariate dimension-reduction method

Probabilistic fatigue analysis of offshore structures requires the numerical simulation of a huge number of loading cases to compute the long-term multi-dimensional integral associated to the fatigue damage assessment. This paper proposes the implementation of the univariate dimension-reduction method developed by Rahman and Xu [1] in order to compute the long-term fatigue damage more efficiently. This method is particularly attractive because it reduces significantly the number of simulations by decomposing the N-dimensional integral associated to expected long-term fatigue damage assessment into the sum of N one-dimensional integrals. In addition, this paper compares the univariate-dimension reduction method with the brute force direct integration methodology and other methods based on Taylor expansions, such as perturbation approach and asymptotic expansion method discussed by Low and Cheung [2]. Two comprehensive examples are included to show the effectiveness of the method. At first, the performance of the univariate dimension-reduction method is evaluated by assessing the fatigue damage of a theoretical structure represented by a single stress response amplitude operator (RAO). Then, in order to show a case of practical application, the fatigue damage is evaluated for a Steel Lazy Wave Riser (SLWR) connected to an FPSO in a water depth of 2200 m.     

R/S分析法在盾构下穿机场过程中的地表变形规律研究

为保证机场的正常运营,在盾构下穿机场的施工过程中,对地表沉降变形控制的要求较高,因此对穿越过程中的施工控制和变形规律研究具有重要意义。首先,基于盾构下穿机场的工程条件,分析盾构下穿过程中的风险,并提出相应的控制措施;同时,根据现场监测数据,分析盾构下穿机场过程中的地表沉降变形规律,并利用R/S分析法对地表沉降的发展趋势进行研究。结果表明:盾构施工引起的机场地表变形均在控制值范围以内,且各监测点在不同序列条件下的Hurst指数均大于0.5,具有沉降持续减弱的趋势,验证下穿过程中风险控制措施的有效性,为类似下穿机场的盾构施工提供一定的实践经验,也为盾构施工引起的地表沉降变形规律研究提供参考。     

桩基建模方法对自升式钻井平台动力响应的影响

随着海洋油气开采作业水深的不断增加,海洋平台固有频率随之降低,易与相同频率成分的波浪产生共振,因此对平台动力响应特性研究是非常有必要的,而桩基模型在平台动力响应分析中发挥着关键作用。以某400英尺自升式钻井平台研究对象,基于等效建模的思想,分别建立了固支桩基、铰接桩基、线性弹簧桩基及非线性弹簧桩基四种有限元模型,并对其进行静力分析、模态分析及瞬态动力学分析,通过对比得到的振动频率、动力放大因子及波流惯性力,得出弹簧桩基模型在平台动力响应分析中的有效性及合理性结论。