地下交通转换平台射流通风特性及风流组织方式研究

为探究地下交通转换平台内通风系统的合理布局,采用比尺模型试验和CFD模拟相结合的方法,研究射流风机和通风组织对地下交通转换平台内气流运动的影响。结果表明： 1）当联络通道内风机射流朝向敞开段时,为使风机升压系数Kj最大,630 mm、900 mm、1 120 mm射流风机的布设位置应距离敞开段分别大于40、50、65 m; 2）大口径射流风机具有更大的Kj,但占用的断面空间更大,且射流诱导段更长,应根据联络通道长度和高度合理选择射流风机口径; 3）地下交通转换平台的通风组织不宜采用同侧开启方式,采用对角抽吸方式时,联络通道内的污染物混入比最低、通风效率最高。     

Sustainability and interactivity between cities and ports: a two-stage data envelopment analysis (DEA) approach

Ports and cities are intrinsically linked. Port city, which serves as a link between the local and global economy, is an integration of both urban and port systems. Constrained by different regional structures, port cities have developed various formulations over time. Using a two-stage data envelopment analysis (DEA) approach, this paper proposes a new method for measuring the sustainable development of different port city systems. While the previous empirical studies often separate the port system and the urban system, this paper assesses the two systems in an integrated way. Moreover, this paper develops a systematic methodology for measurement of sustainability. Twenty world-leading container port cities are selected for this study using contemporary data. The DEA results display their relative differences in levels of sustainable development, which reveal the effectiveness of the prevailing policies in them. Eventually, recommendations are drawn for other port cities by referring to the best practices.     

船舶中速主机低频排气噪声控制研究

结合在船舶建造中遇到的低频主机排气噪声控制问题,从实船噪声源的确定、主机排气噪声谱分析和消声器声学性能验证等方面进行探索,并从排气噪声控制角度对船舶柴油机排气系统设计提出了建议。     

Spar基础浮式风机系泊系统全耦合分析

本文以OC3 Hywind Spar基础浮式风机为研究对象,采用先进的空气动力-水动力耦合时域分析方法,针对其在中国南海某海域风浪流共同作用下,系泊系统、浮式基础运动以及风机与塔桶载荷响应进行分析。对比了定常风与湍流风模型对浮式风机系泊系统、整体运动响应以及风机载荷的影响。计算结果表明：相比于湍流风,采用定常风进行浮式风机系泊系统分析将得到偏于危险的结果,同时浮式风机运动响应与风机载荷结果偏小。本文建议在系泊系统初始设计阶段采用定常风方法进行设计,在系泊分析阶段采用湍流风进行分析,以保证浮式风机长期服役安全。     

液化天然气B型独立液货舱结构低周疲劳研究

基于某B型独立液货舱为研究对象,开展液化天然气(LNG)船码头装卸货工况下的结构应力和温度场热应力分析,重点针对液货舱水平强框处连接节点计算其因装卸货受力和温度变化所引起的疲劳累积损伤。研究结果表明,部分研究疲劳节点由装卸货产生的低周疲劳损伤在整个结构疲劳累积损伤中的占比较大,对结构疲劳损伤起主导作用,需要在液货舱疲劳强度分析中予以重点关注。因此,对此类B型独立液货舱进行结构设计必须考虑低周疲劳的影响。     

安全水平法在SOLAS 救生艇结构强度衡准制定中的应用

本文将安全水平法应用于SOLAS第III章救生艇结构强度衡准的制定。主要采用综合安全评估对救生艇结构强度相关的功能性要求进行衡准的初步制定,从而得出需要的安全水平。基于强度衡准理论分析、实艇试验和事故数据分析相结合的方式评估了现有救生艇结构强度的安全水平,对衡准的合理性提出修改的建议。研究结果为安全水平法在船舶技术标准制定和安全水平评估方面的应用提供了实际案例和使用建议。     

Incorporating the extended theory of planned behavior in a school travel mode choice model: a case study of Shaoxing,China

Travel to and from school can have social, economic, and environmental implications for students and their parents. Therefore, understanding school travel mode choice behavior is essential to find policy-oriented approaches to optimizing school travel mode share. Recent research suggests that psychological factors of parents play a significant role in school travel mode choice behavior and the Multiple Indicators and Multiple Causes (MIMIC) model has been used to test the effect of psychological constructs on mode choice behavior. However, little research has used a systematic framework of behavioral theory to organize these psychological factors and investigate their internal relationships. This paper proposes an extended theory of planned behavior (ETPB) to delve into the psychological factors caused by the effects of adults’ cognition and behavioral habits and explores the factors’ relationship paradigm. A theoretical framework of travel mode choice behavior for students in China is constructed. We established the MIMIC model that accommodates latent variables from ETPB. We found that not all the psychological latent variables have significant effects on school travel mode choice behavior, but habit can play an essential role. The results provide theoretical support for demand policies for school travel.     

A Pareto-improving hybrid rationing and pricing policy with multiclass network equilibria

This paper extends the work on Pareto-improving hybrid rationing and pricing policy for general road networks by considering heterogeneous users with different values of time. Mathematical programming models are proposed to find a multiclass Pareto-improving pure road space rationing scheme (MPI-PR) and multiclass hybrid rationing and pricing schemes (MHPI and MHPI-S). A numerical example with a multimodal network is provided for comparing both the efficiency and equity of the three proposed policies. We discover that MHPI-S can achieve the largest reduction in total system delay, MHPI can induce the least spatial inequity and MHPI-S is a progressive policy which is appealing to policy makers. Furthermore, numerical results reveal that different classes of users react differently to the same hybrid policies and multiclass Pareto-improving hybrid schemes yield less delay reduction when compared to their single-class counterparts.     

Back-Calculation of Ground Stress Field and Rockburst Analysis for Wunvfeng Tunnel北大核心CSCD

Studying the in-situ stress distribution at a tunnel site is very important to determine surrounding rock characteristics, the engineering design and the construction scheme. By using the multiple linear regression method based on the least square algorithm, the initial geostress field is analyzed and the corresponding regression coefficients are obtained. The ground stress obtained from the proposed back analysis is reasonable and can meet the demands of the engineering applications. From the rockburst risk level distribution diagram, it is speculated that the Wunvfeng tunnel is in the high filed stress area. Field monitoring should be strengthened and emergency plans should be made to cope with the rockburst risks during the construction process. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Mechanism of Tunnel Water Inflow Caused by Bending Failure of a Waterproof Dike Based on a Circular Thin Plate Mechanical Model北大核心CSCD

Water bursts during tunnel construction endanger construction, and it is therefore necessary to reserve a waterproof dike with the required thickness to avoid water bursts and to take reinforcement of the dike and treatment of the structure liable to trigger a water burst. Using the water burst at K5+398 of the Mingyueshan tunnel of the Shanghai-Chengdu expressway as an example, and considering the type of tunnel section and the upright mudstone of the dike, the waterproof dike at the work face is simplified as a round thin plate. A formula for the calculation of a minimum safety thickness for the critical waterproof dike is deduced by analyzing the force applied on the water-proof dike, and the minimum safety thickness for the water burst section at K5+398 of the Mingyueshan tunnel is cal-culated. The numerical simulation analysis demonstrates the critical thickness of waterproof dike at K5+398 of the Mingyueshan tunnel is 1.4-1.55 m, and the calculated water inflow and water burst basically agree with the actual condition. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.