半刚性基层与沥青层之间界面条件对结构性能的影响

利用弹性层状体系理论计算了在不同层间条件下的半刚性沥青路面沥青层中的剪应力、拉应力分布情况及路表弯沉值,分析了基层与沥青层之间由于层间界面条件变化引起的路面结构受力状态的变化。计算表明基层与面层保持连续的界面条件是十分重要的;过分致密不透水的半刚性基层有可能造成路面的早期损坏。     

昆明东风路立交桥动载试验分析

桥梁结构的动力特性(振型、频率和阻尼)是桥梁承载力评定的重要参数,同时也是识别桥梁结构工作性能和桥梁抗震分析的重要参数,本文通过昆明东风路立交桥的动载试验,分析桥梁在不同工况下动应变、动挠度、频率和阻尼以及影响实测冲击系数的原因。对全面地评价桥梁结构有重要意义。     

微型客车白车身模态分析

建立了某微型客车白车身结构的有限元模型，计算了在自由状态下该白车身结构的振动模态，并提出了鉴别整体模态与局部模态的方法。计算结果与试验结果进行了对比分析，结果表明所建立的有限元模型基本反映了原结构的振动特性。     

UD63型尼桑汽车起动和充电系控制电路及故障排除

系统地介绍UD63型尼桑汽车起动系和充电系控制电路的原理及故障分析,并给出检修实例。有利于准确、快速地排除该类车型的故障。     

柴油机活塞组耦合模型有限元分析

建立了活塞、活塞环、活塞销和缸套的耦合模型，采用接触对、设定接触热阻的方法对耦合模型进行了二维和三维瞬态温度场的分析。对采用接触模型和粘贴方式模型的分析结果做了比较。对活塞组的机械负荷及热负荷做了耦合场静态分析。     

桑塔纳汽车后桥强度有限元分析及改进方案

根据桑塔纳2000汽车后桥的实际结构，利用通用有限元软件ANSYS，对后桥进行了弹塑性静态结构有限元分析。主要研究了结构焊接处强度、横梁破坏处在半个周期载荷波内应力状态变化；给出了在最大剪应变幅平面上，影响疲劳强度及寿命的基本参量的计算结果；提出了提高后桥强度的改进方案。     

电站600 MW机组P91三通的设计制造

采用压力面积法对电站 6 0 0MW机组主蒸汽管道P91材质三通进行设计 ,应用有限元对设计模型进行验证 ,通过改进常规径向补偿热压工艺 ,成功制造出 6 0 0MW机组P91钢 90°热挤压三通。通过检验和试验 ,表明其可替代进口锻制 6 0 0MW机组P91钢 90°三通。     

An Exploration of the Relationship between Timing and Duration of Maintenance Activities

The timing and duration of an activity episode are two important temporal aspects of activity-travel behavior. Understanding the causal relationship between these two variables would be useful in the development of activity-based travel demand modeling systems. This paper investigates the relationship between these two variables by considering two different causal structures – one structure in which time-of-day choice is determined first and influences duration and a second structure in which activity duration is determined first and affects time-of-day choice. These two structures are estimated within a discrete-continuous simultaneous equations framework employing a full-information maximum likelihood methodology that allows error covariance. The estimation is performed separately for commuter and non-commuter samples drawn from a 1996 household travel survey data set from the Tampa Bay area in Florida. The results of the model estimation effort show that the causal structure in which activity duration precedes or affects activity timing (time of day choice) performs better for the non-commuter sample. For the commuter sample, the findings were less conclusive with both causal structures offering equally good statistical measures of fit. In addition, for the commuter sample, all error correlations were found to be zero. These two findings suggest that time of day choice and activity episode duration are only loosely related for the commuter sample, possibly due to the relatively non-discretionary and inflexible work activity and travel.     

Hub location with flow economies of scale

A characteristic feature of hub and spoke networks is the bundling of flows on the interhub links. This agglomeration of flows leads to reduced travel costs across the interhub links. Current models of hub location do not adequately model the scale economies of flow that accrue due to the agglomeration of flows. This paper shows that current hub location models, by assuming flow-independent costs, not only miscalculate total network cost, but may also erroneously select optimal hub locations and allocations. The model presented in this paper more explicitly models the scale economies that are generated on the interhub links and in doing so provides a more reliable model representation of the reality of hub and spoke networks.     

胶焊,点焊和胶接接头应力分布的比较分析

采用三维弹塑性有限元数值分析方法，比较了分析了胶焊，点焊和胶接接头的应力分布情况，结果表明，胶焊接头与胶接接头的应力分布特征值基本相同，仅在焊点区内略有区别，胶焊接头中的胶粘剂有效地降低了点焊接头中焊点的应力，消除了其焊点过级处的应力集中，所得应力分布可合理解释已有强度试验结果。