Prediction of travel time variability for cost-benefit analysis

Unreliable travel times cause substantial costs to travelers. Nevertheless, they are often not taken into account in cost-benefit analyses (CBA), or only in very rough ways. This paper aims at providing simple rules to predict variability, based on travel time data from Dutch highways. Two different concepts of travel time variability are used, which differ in their assumptions on information availability to drivers. The first measure is based on the assumption that, for a given road link and given time of day, the expected travel time is constant across all working days (rough information: RI). In the second case, expected travel times are assumed to reflect day-specific factors such as weather conditions or weekdays (fine information: FI). For both definitions of variability, we find that the mean travel time is a good predictor. On average, longer delays are associated with higher variability. However, the derivative of variability with respect to delays is decreasing in delays. It can be shown that this result relates to differences in the relative shares of observed traffic ‘regimes’ (free-flow, congested, hyper-congested) in the mean delay. For most CBAs, no information on the relative shares of the traffic regimes is available. A non-linear model based on mean travel times can then be used as an approximation.     

On the income elasticity of the value of travel time

Transport infrastructure is long-term and in appraisal it is necessary to value travel time savings for future years. This requires knowing how the value of time (VTT) will develop over time as incomes grow. This paper investigates if the cross-sectional income elasticity of the VTT is equal to inter-temporal income elasticity. The study is based on two identical stated choice experiments conducted with a 13 year interval. Results indicate that the relationship between income and the VTT in the cross-section has remained unchanged over time. As a consequence, the inter-temporal income elasticity of the VTT can be predicted based on cross-sectional income elasticity. However, the income elasticity of the VTT is not a constant but increases with income. For this reason, the average income elasticity of the VTT in the cross-sections has increased between the two survey years and can be expected to increase further over time.     

穿越古滑坡川主寺隧道围岩破坏特征及稳定性研究

文章以川主寺隧道所处的工程地质条件为基础,通过现场调研分析了隧道围岩变形破坏形式主要为坍塌、掉块以及剥落.围岩稳定性三维有限元数值模拟结果显示,碎裂围岩自稳能力差,围岩变形以弹塑性变形、松弛变形为主;H型钢拱架支护结构对碎裂围岩稳定性起到积极的作用,并通过典型洞段现场位移监测数据分析结果得以证实.     

轴对称解对隧道衬砌水压力计算的适用性研究

文章根据渗流理论推导了隧道衬砌水压力的轴对称解,并利用数值分析方法研究了轴对称解对不同形状隧道断面与浅埋隧道的适用性.研究结果表明:轴对称解适用于非圆形隧道断面衬砌水压力的估算;隧道断面形状对衬砌水压力折减系数的影响较小,可以忽略不计,其影响大小主要由衬砌与围岩的渗透系数比值决定.对于浅埋低水头隧道,用轴对称解计算的毛洞流量Qm与数值解比较,其误差较大,最大误差为36.5％;但用来计算衬砌水压力p1以及衬砌后水流量Q1时,误差相对较小,最大误差为6.3％,特别是利用轴对称解得出的衬砌水压力值与利用数值解得出的衬砌水压力特征值最大误差仅为3.4％.     

基于Bayes判别分析方法的叙岭关隧道溶洞水源识别

基于Bayes判别方法,选取水化学常量组分作为判别指标,利用叙岭关隧道地区9个动态监测点的53个水样样本建立了该地区的水源判别模型.模型检验结果表明,其回判准确率为96.23％,具有较高的识别精度和工程推广能力.利用建立的判别模型,对叙岭关隧道1号溶洞内两个出水点RQ1和RQ2的水源进行了识别,并结合其流量动态变化特征、同位素分析结果,以及1号溶洞发育位置,推断1号溶洞内两个出水点的水源为P1m+q含水层中的岩溶地下水.根据判别结果,建议1号溶洞采取“以排为主”的原则加以处治,并尽量保留溶洞水的过水通道.     

偏压连拱隧道施工方法研究

文章采川三维有限元数值模拟研究了偏压连拱隧道不同施工顺序下拱顶下沉、中墙稳定性及初期支护受力特征.研究结果表明,先开挖浅埋侧时,拱顶沉降较小,中墙在施工中的稳定安全系数较大、弯矩较小,初期支护受力较大;对于浅埋偏压连拱隧道,围岩变形及中墙在施工中的稳定性控制更为重要.所以,从有利于围岩变形、中墙稳定性控制以及中墙受力的角度出发,宜采用先开挖浅埋侧的施工方法.     

百色低碳物流发展浅析

文章阐述了百色发展低碳物流的必要性,分析了百色低碳物流发展所面临的问题,提出了针对性的低碳物流发展思路及建议。     

施工最大悬臂状态梁桥P-Δ效应有限元分析

文章以赣江大桥和宁海新桥特大桥为研究对象,利用有限元模型对其主桥施工最大悬臂状态下P-Δ效应进行了计算,分析了考虑P-Δ效应时的桥梁位移与应力变化情况,为今后类似工程的设计计算和施工监控提供参考。     

物联网平台下智能交通系统体系框架研究

文章以现有智能交通系统体系框架为基础,提出以结构化方法制定物联网平台下智能交通系统体系框架,并以结构化方法的基本步骤为主线,结合物联网工作原理和自主体系结构,从用户服务、逻辑框架、物理框架三方面探讨新体系框架与现有体系框架的差别。     

梧州西江四桥主桥结构设计及受力分析

文章结合梧州西江四桥主桥工程方案,介绍了该主桥桥型的结构受力特性,阐述了主桥各主要构件的设计要点,并通过静力计算及动力分析,验证了该主桥结构设计方案的合理性和可行性。