钢波纹管涵在高速公路应用的经济性分析

文章简要介绍了毕威高速公路填方路基段钢波纹管涵与盖板涵的经济性分析,并总结了钢波纹管涵应用的经济和社会效益。     

A carbon footprint-based closed-loop supply chain model under uncertainty with risk analysis: A case study

The management of products’ end-of-life and the recovery of used products has gained significant importance in recent years. In this paper, we address the carbon footprint-based problem that arises in a closed-loop supply chain where returned products are collected from customers. These returned products can either be disposed of or be remanufactured to be resold as new ones. Given this environment, an optimization model for a closed-loop supply chain (CLSC) in which carbon emission is expressed in terms of environmental constraints, i.e., carbon emission constraints, is developed. These constraints aim to limit the carbon emission per unit of product supplied with different transportation modes. Here, we design a closed-loop network where capacity limits, single-item management and uncertainty on product demands and returns are considered. First, fuzzy mathematical programming is introduced for uncertain modeling. Then, the statistical approach to the possibility to synthesize fuzzy information is utilized. Therefore, using a defined possibilistic mean and variance, we transform the proposed fuzzy mathematical model into a crisp form to facilitate efficient computation and analysis. Finally, the risk caused by violating the estimated resource constraints is analyzed so that decision makers (DMs) can trade off between the expected cost savings and the expected risk. We utilize data from a company located in Iran.     

A comparative life-cycle energy and emissions analysis for intercity passenger transportation in the U.S. by aviation,intercity bus,and automobile

Intercity passenger trips constitute a significant source of energy consumption, greenhouse gas emissions, and criteria pollutant emissions. The most commonly used city-to-city modes in the United States include aircraft, intercity bus, and automobile. This study applies state-of-the-practice models to assess life-cycle fuel consumption and pollutant emissions for intercity trips via aircraft, intercity bus, and automobile. The analyses compare the fuel and emissions impacts of different travel mode scenarios for intercity trips ranging from 200 to 1600 km. Because these modes operate differently with respect to engine technology, fuel type, and vehicle capacity, the modeling techniques and modeling boundaries vary significantly across modes. For aviation systems, much of the energy and emissions are associated with auxiliary equipment activities, infrastructure power supply, and terminal activities, in addition to the vehicle operations between origin/destination. Furthermore, one should not ignore the embodied energy and initial emissions from the manufacturing of the vehicles, and the construction of airports, bus stations, highways and parking lots. Passenger loading factors and travel distances also significantly influence fuel and emissions results on a per-traveler basis. The results show intercity bus is generally the most fuel-efficient mode and produced the lowest per-passenger-trip emissions for the entire range of trip distances examined. Aviation is not a fuel-efficient mode for short trips (<500 km), primarily due to the large energy impacts associated with takeoff and landing, and to some extent from the emissions of ground support equipment associated with any trip distance. However, aviation is more energy efficient and produces less emissions per-passenger-trip than low-occupancy automobiles for trip distances longer than 700–800 km. This study will help inform policy makers and transportation system operators about how differently each intercity system perform across all activities, and provides a basis for future policies designed to encourage mode shifts by range of service. The estimation procedures used in this study can serve as a reference for future analyses of transportation scenarios.     

Evaluating sustainability of supply chains by two-stage range directional measure in the presence of negative data

Assessing sustainability of supply chains is a critical and increasingly complex problem. In recent years sustainability has received more attention in supply chain management (SCM) literature with triple bottom lines including social, environmental, and economic factors. Conventional data envelopment analysis (DEA) models consider decision making units (DMUs) as black boxes that consume a set of inputs to produce a set of outputs and do not take into consideration internal interactions of DMUs. Two-stage DEA models deal with such DMUs. However, existing two-stage DEA models are applicable only in technologies characterized by positive inputs/outputs. This paper aims to build and present a new two-stage DEA model considering negative input-intermediate-output data. Some numerical examples along with some theorems and properties are given to show capability of proposed method. The proposed ideas are used in a case study where 29 Iranian supply chains producing equipment of expendable medical devices are evaluated in terms of sustainability.     

Multimodal travel groups and attitudes: A latent class cluster analysis of Dutch travelers

For developing sustainable travel policies, it may be helpful to identify multimodal travelers, that is, travelers who make use of more than one mode of transport within a given period of time. Of special interest is identifying car drivers who also use public transport and/or bicycle, as this group is more likely to respond to policies that stimulate the use of those modes. It is suggested in the literature that this group may have less biased perceptions and different attitudes towards those modes. This supposition is examined in this paper by conducting a latent class cluster analysis, which identifies (multi)modal travel groups based on the self-reported frequency of mode use. Simultaneously, a membership function is estimated to predict the probability of belonging to each of the five identified (multi)modal travel groups, as a function of attitudinal variables in addition to structural variables. The results indicate that the (near) solo car drivers indeed have more negative attitudes towards public transport and bicycle, while frequent car drivers who also use public transport have less negative public transport attitudes. Although the results suggest that in four of the five identified travel groups, attitudes are congruent with travel mode use, this is not the case for the group who uses public transport most often. This group has relatively favorable car attitudes, and given that many young, low-income travelers belong to this group, it may be expected that at least part of this group will start using car more often once they can afford it. Based on the results, challenges for sustainable policies are formulated for each of the identified (multi)modal travel groups.     

Valuing crowding in public transport: Implications for cost-benefit analysis

This paper investigates the valuation of crowding in public transport trips and its implications in demand estimation and cost-benefit analysis. We use a choice-based stated preference survey where crowding levels are represented by means of specially designed pictures, and use these data to estimate flexible discrete choice models. We assume that the disutility associated with travelling under crowded conditions is proportional to travel time. Our results are consistent with and extend previous findings in the literature: passenger density has a significant effect on the utility of travelling by public transport; in fact, the marginal disutility of travel time in a crowded vehicle (6 standing-passengers/m²) is 2.5 times higher than in a vehicle with available seats. We also compare the effects of different policies for improving bus operations, and the effect of adding crowding valuation in cost-benefit analysis. In doing that, we endogenise the crowding level as the result of the equilibrium between demand and supplied bus capacity. Our results indicate that important benefits may be accrued from policies designed to reduce crowding, and that ignoring crowding effects significantly overestimate the bus travel demand the benefits associated with pure travel time reductions.     

Prioritizing new bicycle facilities to improve low-stress network connectivity

This paper introduces a new method to prioritize bicycle improvement projects based on accessibility to important destinations, such as grocery stores, banks, and restaurants. Central to the method is a new way to classify “bicycling stress” using marginal rates of substitution which are commonly developed through empirical behavioral research on bicyclist route choice. MRS values are input parameters representing bicycling stress associated with the number of lanes and speed limit of a street. The method was programmed as a geographic information system tool and requires commonly available data. The tool is demonstrated on three improvement scenarios that were recently proposed for Seattle, Washington. The full build-out scenario consists of 771 projects that include various new bike lanes, protected bike lanes, and multi-use trails. The tool produces priority rankings based on a project’s ability to improve low-stress connectivity between homes and important destinations. The analysis identifies specific areas and neighborhoods that can be expected to exhibit better bikeability. Transportation planners can use the tool to help communicate anticipated project impacts to decision-makers and the public.     

Guidance for transport planning and policymaking in the face of an uncertain future

Uncertainty of outcome is widely recognised as a concern facing decision-makers and their advisors. In a number of spheres of policy, it appears uncertainty has intensified in the face of globalisation, economic instability, climate change, technological innovation and changing consumer preferences. How can planners and policymakers plan for an uncertain future? There is growing interest in, and use of, techniques that can help decision-making processes where deep uncertainty is involved. This paper is based upon one of the most recent international examples of a foresight exercise employed to examine uncertainty – specifically that which concerns uncertainty over the nature and extent of future demand for car travel. The principal focus of the paper is on the insights and guidance this examination of uncertainty brings forth for transport planning and policymaking. To accommodate deep uncertainty requires a flexible and open approach in terms of how policy and investment possibilities are formulated and judged. The paper argues for a focus upon the Triple Access System of spatial proximity, physical mobility and digital connectivity as a framework for policy and investment decisions that can harness flexibility and resilience. Uncertainty becomes an opportunity for decision-makers with the realisation that they are shaping the future rather than (only) responding to a predicted future. The paper outlines two forms of policymaking pathway: regime-compliant (in which adherence to trends and the nature of the world we have known pushes policy) and regime-testing (in which the nature of the world as we have known it is brought into question and vision pulls policy decisions). Stronger orientation towards regime-testing to assist in managing an uncertain future is advocated.     

Customizing driving cycles to support vehicle purchase and use decisions: Fuel economy estimation for alternative fuel vehicle users

Wider deployment of alternative fuel vehicles (AFVs) can help with increasing energy security and transitioning to clean vehicles. Ideally, adopters of AFVs are able to maintain the same level of mobility as users of conventional vehicles while reducing energy use and emissions. Greater knowledge of AFV benefits can support consumers’ vehicle purchase and use choices. The Environmental Protection Agency’s fuel economy ratings are a key source of potential benefits of using AFVs. However, the ratings are based on pre-designed and fixed driving cycles applied in laboratory conditions, neglecting the attributes of drivers and vehicle types. While the EPA ratings using pre-designed and fixed driving cycles may be unbiased they are not necessarily precise, owning to large variations in real-life driving. Thus, to better predict fuel economy for individual consumers targeting specific types of vehicles, it is important to find driving cycles that can better represent consumers’ real-world driving practices instead of using pre-designed standard driving cycles. This paper presents a methodology for customizing driving cycles to provide convincing fuel economy predictions that are based on drivers’ characteristics and contemporary real-world driving, along with validation efforts. The methodology takes into account current micro-driving practices in terms of maintaining speed, acceleration, braking, idling, etc., on trips. Specifically, using a large-scale driving data collected by in-vehicle Global Positioning System as part of a travel survey, a micro-trips (building block) library for California drivers is created using 54 million seconds of vehicle trajectories on more than 60,000 trips, made by 3000 drivers. To generate customized driving cycles, a new tool, known as Case Based System for Driving Cycle Design, is developed. These customized cycles can predict fuel economy more precisely for conventional vehicles vis-à-vis AFVs. This is based on a consumer’s similarity in terms of their own and geographical characteristics, with a sample of micro-trips from the case library. The AFV driving cycles, created from real-world driving data, show significant differences from conventional driving cycles currently in use. This further highlights the need to enhance current fuel economy estimations by using customized driving cycles, helping consumers make more informed vehicle purchase and use decisions.     

Integrating capacity analysis with high-speed railway timetabling: A minimum cycle time calculation model with flexible overtaking constraints and intelligent enumeration

Compared with most optimization methods for capacity evaluation, integrating capacity analysis with timetabling can reveal the types of train line plans and operating rules that have a positive influence on improving capacity utilization as well as yielding more accurate analyses. For most capacity analyses and cyclic timetabling methods, the cycle time is a constant (e.g., one or two hours). In this paper, we propose a minimum cycle time calculation (MCTC) model based on the periodic event scheduling problem (PESP) for a given train line plan, which is promising for macroscopic train timetabling and capacity analysis. In accordance with train operating rules, a non-collision constraint and a series of flexible overtaking constraints (FOCs) are constructed based on variations of the original binary variables in the PESP. Because of the complexity of the PESP, an iterative approximation (IA) method for integration with the CPLEX solver is proposed. Finally, two hypothetical cases are considered to analyze railway capacity, and several influencing factors are studied, including train regularity, train speed, line plan specifications (train stops), overtaking and train heterogeneity. The MCTC model and IA method are used to test a real-world case involving the timetable of the Beijing–Shanghai high-speed railway in China.