日立公司出口欧洲铁路车辆技术

介绍了日立公司出口英国的395型高速列车的技术,以及在车辆研发过程中遇到的标准不同的问题,并概述了在防碰撞方面采取的特殊措施。     

橡胶沥青性能影响因素的试验研究

为了正确控制橡胶沥青工艺,采用不同胶粉种类、胶粉细度、拌和温度、基质沥青类型等制备橡胶沥青,进行针入度、软化点、弹性恢复以及SHRP等试验,分别测试橡胶沥青的高温性能、低温性能、抗老化性能等,研究各因素对橡胶沥青性能的影响,得出20目橡胶粉掺量以16%~18%较为合适的结果。     

就地冷再生技术在高速公路养护工程中的应用研究

就地冷再生技术具有施工便捷、污染小、旧料回收利用率高、节约成本等优势,在公路养护中得到了利用.以S49新扬高速为例,从适用条件、混合料设计、路用性能验证以及社会经济效益等方面,对就地冷再生技术进行系统研究,结果表明就地冷再生技术在高速公路养护工程中应用效果理想,可进行推广运用.     

基于LabVIEW和PXI的电力机车电气综合性能测试系统

介绍了电力机车电气综合性能测试平台的基本组成,从硬件平台、软件设计等方面详细分析了基于LabVIEW和PXI的电力机车电气综合性能测试系统的开发应用。     

Indicators of reliability and vulnerability: Similarities and differences in ranking links of a complex road system

This article investigates two performance attributes of road networks, reliability and vulnerability, analyzing their similarities as well as the differences that justify distinct definitions, based on consolidation of recent studies. We also discuss the indicators found in the literature for these two performance attributes. Since various authors treat vulnerability as an aspect of reliability instead of a specific attribute, we carried out an application to a complex road network representative of the city of Rio de Janeiro to check the suitability of this approach. The results show that the vulnerability indicators are more strongly affected by the characteristics of alternative routes while the reliability metrics are more sensitive to the congestion level. The conclusion is that reliability and vulnerability should be treated distinctly for evaluating the performance of road network links.     

木质素纤维对再生透水沥青混合料路用性能研究

通过向透水沥青混合料(OGFC)中引入废弃混合料(再生OGFC)制备出再生OGFC,研究了木质素纤维掺量(0.01%、0.02%和0.03%)对再生透水沥青混合料路用性能(水稳性、高温性能、低温抗裂性能、抗滑性能和内聚强度)的影响。结果表明,引入再生OGFC料对混合料水稳性和低温抗裂性有明显不利影响,且对抗滑性能影响不大,而对高温性能有小幅提升作用;引入木质素纤维可明显改善再生OGFC路用性能,且木质素纤维最佳掺量为0.02%。     

A yaw-moment control method based on a vehicle's lateral jerk information

Previously, a new control concept called ‘G-vectoring control (GVC)’ to improve vehicle agility and stability was developed. GVC is an automatic longitudinal acceleration control method that responds to vehicle lateral jerk caused by the driver's steering manoeuvres. In this paper, a new yaw-moment control method, which generates a stabilising moment during the GVC command and has positive acceleration value and the driver's accelerator pedal input is zero, was proposed. A new hybrid control, which comprises GVC, electric stability control and this new control, was constructed, and it was installed in a test vehicle and tested on a snowy surface. The very high potential for improvement in both agility and stability was confirmed.     

浮置板式轨道结构隔振效果仿真研究

建立列车—轨道结构耦合系统有限元模型,将轨道不平顺作为列车—轨道结构耦合系统的激励源,对普通碎石道床轨道结构和浮置板式轨道结构的列车—轨道结构耦合系统动力学性能进行仿真研究,对比分析这2种类型的轨道结构系统振动响应与系统振动传递函数,评价浮置板式轨道结构的隔振效果。分析结果表明,浮置板式轨道结构与普通碎石道床轨道结构相比,振动加速度降低约70%,距线路5 m处大地振动加速度响应峰值降低约62.8%,相应Z振级衰减约10 dB,竖向振动加速度频率范围由0~200 Hz降到0~60 Hz,有效起到了振动隔离效果。     

螺旋匝道和螺旋桥的小客车行驶速度特征

为明确螺旋匝道和螺旋桥处的驾驶行为模式和汽车运行特征，在涪陵长江一桥、乌江二桥、重庆融侨大道和涪陵金凯环形高架4处地点开展螺旋匝道实车试验，用车载仪器采集自然驾驶状态下的汽车连续行驶轨迹、速度以及周围行驶环境等信息。基于自然驾驶数据，研究螺旋匝道范围内的速度变化模式、幅值特性以及影响因素。研究结果表明：单车道螺旋匝道的速度变化模式多样化，双车道螺旋匝道的行驶速度在整体上维持稳定，匝道范围内的连续升坡和降坡并未导致速度出现趋势性衰减和趋势性升高；螺旋匝道并入主线时，驾驶人在合流鼻之前有明显的、共性的减速行为，这与现行设计标准中的设计假定相反；除涪陵长江一桥之外，其余3处都是下行速度低于上行速度；螺旋匝道设计速度越低，实测速度与设计速度之间的偏离越严重，并且速度幅值离散化，因此不建议使用20 km·h^-1的匝道设计速度；螺旋匝道运行速度与匝道半径成正相关。     

装配式梁桥横向协同工作性能度量指标的研究

为了表征运营期间装配式梁桥的横向协同工作性能,提出了一种间接度量指标——相邻预制梁间的应变相关系数;同时建立了装配式梁桥的简化力学模型,通过推导建立了该指标的解析表达式。理论分析和数值仿真研究表明,在保证足够的样本长度条件下,交通流荷载趋向统计稳定,此时结构特性成为该度量指标的唯一影响因素,证明了该指标具备表征装配式梁桥横向协同工作性能的条件。