F型与直壁型护栏在客车撞击下的仿真研究

为了对比研究A类防撞等级中F型混凝土护栏和直壁型混凝土护栏的防护性能,建立两种护栏与客车的有限元模型,运用ANSYS Workbench软件中显式动力学模块,控制仿真碰撞的试验参数,将大客车模型以规定的初速度和碰撞角度进行计算机仿真碰撞试验,从车辆的加速度、车辆运行轨迹、护栏的最大动态变形量等方面综合对比两种护栏的防护性能。结果表明:相比直壁式护栏,F型混凝土护栏防撞性能、安全性能、导向性能较好。     

车辆隔热壁K值计算中空气层的处理方法

对轨道交通车辆多层复合结构的隔热壁进行隔热性能理论计算与仿真计算的对比,对隔热壁内部空气层的隔热性能进行分析。结论为:在车辆多层复合结构的隔热壁K值计算中,当空气层厚度大于一定厚度时,流体自然对流对隔热壁的隔热性能影响较大。利用多项式密度(Polynomial Denisity)和Boussinesq模型两种算法,对所得结论进行了验证。     

不同形状质量块的声学超材料结构隔声特性研究

随着对舰船声隐身性能要求的不断提高,舰船隔声材料不仅要轻质还应具有优良的隔声性能。夹层板结构具有轻质,且在高频段具有良好的隔声性能,但其在中低频段隔声性能不是很理想。薄膜型声学超材料结构具有良好的低频带隔声性能,因此本文将薄膜型声学超材料引入传统蜂窝夹层板结构中,设计新的超材料蜂窝夹层板结构。通过数值方法对不同形状质量块超材料结构的隔声特性进行分析,并探讨蜂窝边框形状、质量块大小以及薄膜预应力对米字形质量块超材料结构隔声特性的影响。     

基于Matlab油船意外泄油性能的程序设计

基于概率方法的意外泄油性能参数计算是2010年1月1日及以后新造船破舱稳性需要评估的性能之一,满足一定的衡准要求方可。根据油船的分舱分别进行船底破损概率和船侧破损概率的插值,然后按照一定的公式求出船底破损后与船侧破损后的泄油量的加权之和,即意外泄油性能参数。由于手工计算费时费力,文章基于Matlab平台,开发了意外泄油性能参数的自动计算程序模块。计算结果与文献结果相比较,证明了本程序的计算精度,具有较好的工程实用价值。     

Environmental and transport effects of warehouse relocationing: evidence from Norway

Reducing traffic volumes and CO2-emissions from freight transport has proven difficult in many countries. Although the increasing suburbanization of warehouses is seen as a relevant land use trend, comprehensive analyses of their impact remain scarce. This study uses real data in modeling transport, costs, environmental and modal effects from warehouse relocations around Oslo and Trondheim (Norway). Results indicate that for Oslo, traffic performance (ton-km), CO2-emissions, and transport costs increase following warehouse suburbanization. For Trondheim, transport performance and CO2-emissions increase less, while transport costs decrease marginally. We conclude that specific case characteristics (geography and trade patterns) are important in determining the strength and direction of effects, and expect that common concomitant developments (warehouse centralization and consolidation) would lead to more pronounced results. Our findings confirm some, but challenge other, findings from the relatively scarcely literature available. Finally, the study's more general insights and observations can help advance similar analyses beyond Norway.     

导电密封胶对不锈钢车体电阻点焊焊接性能影响研究

分析了电阻点焊原理,对相同的点焊搭接方式,分别采用3种工况进行焊接试验。3种工况分别采用相同焊接参数对搭接接触面涂导电密封胶和不涂导电密封胶的试件进行焊接;优化焊接参数后,对搭接接触面涂导电密封胶的试验件进行焊接。对3种工况下完成的焊接试件进行拉伸力检测试验、金相熔核尺寸检测和缺陷检测试验,对熔核直径、拉伸力、熔核内部缺陷的试验结果进行分析。试验结果表明:导电密封胶对电阻点焊的焊接性能存在影响;通过适当优化焊接参数,可以提高涂导电密封胶试件的焊接性能,焊接质量能够满足产品焊接要求。     

电子车辆识别技术的性能、安全性和成本分析及应用

电子车辆识别(EVI)是利用电子信号对车辆进行自动识别和监测的技术.随着RFID技术的不断发展,EVI应用的领域和范围不断扩大,这对EVI的性能、安全性和成本提出了更高的要求.     

Estimation of delay variability at signalized intersections for urban arterial performance evaluation

Urban arterial performance evaluation has been broadly studied, with the major focus on average travel time estimation. However, in view of the stochastic nature of interrupted flow, the ability to capture the characteristics of travel time variability has become a critical step in determining arterial level of service (LOS). This article first presents a stochastic approach that integrates classic cumulative curves and probability theories in order to investigate delay variability at signalized intersections, as a dominant part of the link travel time variability. This serves as a basis for arterial travel time estimation, which can be obtained through a convolution of individual link travel time distributions. The proposed approach is then applied in the estimation of travel time along one arterial in Shanghai, China, with abundant automatic vehicle identification (AVI) data sources. The travel time variability is evaluated thoroughly at 30-min intervals, with promising results achieved in comparison to the field measurements. In addition, the estimated travel time distributions are utilized to illustrate the probability of multiple LOS ranges, namely, reliability LOS. The results provide insights into how we might achieve a more reliable and informative understanding of arterial performance.     

Effectiveness of travel time reliability indicators in the light of the assessment of dynamic managed lane strategy

ABSTRACT

The aim of traffic management is to ensure a high quality of service for a maximum number of users by decreasing congestion and increasing safety. Uncertainty of travel times decreases the quality of service and leads end users to modify their plans regardless of the average travel time. Indicators describing travel time reliability are being developed and should be used in the future both for the optimization and for the assessment of active traffic management operations. This article discusses the efficiency of certain reliability indicators in an ex-post assessment of a traffic management strategy. Ex-post assessment is based on an observational before–after study. As some factors other than the studied management strategy may intervene between the two periods, and as most reliability indicators require knowledge of the full travel time distribution and not only its average, a methodology is developed for the identification of the impact of these exogenous factors on the whole distribution. Many reliability indicators are split into different parts allowing the identification of the part due to the management strategy impact. The methodology is tested numerically on a managed lane operation consisting of Hard Shoulder Running (HSR) at rush hour on a section of a French motorway. The variation of some reliability indicators appears misleading, whereas the splitting of the indicators increases our understanding of the strategy and highlights its impact. The paper gives the reliability assessment of the HSR field test and discusses different reliability indicators to identify their potential performances and shortcomings.     

水泥粉煤灰碎石基层材料路用性能的研究

对水泥粉煤灰碎石基层材料的各项路用性能进行了试验研究.研究表明,水泥粉煤灰稳定碎石兼具水泥和二灰稳定材料的优点,将其作为路面基层材料是可行的.