列车运行自动调整研究回顾与展望

描述列车运行自动调整问题,回顾国内外研究进展,分析该技术的应用现状,并展望该技术未来发展的若干方向。     

郑北下行驼峰TW-2自动化系统模拟试验与软件改进

本文介绍了郑北下行驼峰TW-2自动化系统在开通之前进行的模拟试验，以及根据现场实际作业情况对软件进行的改进。     

基于虚拟仪器技术的SS6B型机车单板测试系统的研制

介绍了一种基于虚拟仪器技术的自动测试系统,能快速高效地检测电子控制柜插件的好坏,准确迅速地确定插件的故障位置,而且操作简单,安全可靠。     

Nonlinear feedforward–feedback control of clutch-to-clutch shift technique

To improve the shift quality of the vehicle with clutch-to-clutch gear shifts, a nonlinear feedforward–feedback control scheme is proposed for clutch slip control during the shift inertia phase. The feedforward control is designed based on flatness in consideration of the system nonlinearities, and the linear feedback control is given to accommodate the model errors and the disturbances. Lookup tables, which are widely used to represent complex nonlinear characteristics of powertrain systems, appear in their original form in the designed feedforward controller, while the linear feedback controller is calculated through linear matrix inequalities such that the control system is robust against the parameter uncertainties. Finally, the designed controller is tested on an AMESim powertrain simulation model, which contains a time-variant model of clutch actuators.     

浅析汽车自动变速器故障检测与维修

自动变速器与手动变速器相比较,它所关联的知识面更加的广泛,机械的结构也更加的复杂,控制的原理也更加的有难度,所以在自动变速器故障检测以及维修的要求也会更高。自动变速器如若发生故障之后,需要专门的工具以及按照相关的程序进行检测维修,才能及时准确的找出故障问题,并且能够降低返修机率的发生。本文主要对汽车自动变速器的工作原理介绍,并且提出了相关的故障形成原因,最后也给出了排除故障以及维修方法。     

数控回转头冲床自动编程系统

介绍了《数控回转头冲床自动编程系统》的功能和设计特点。它利用中Ｗｉｎｄｏｗｓ９５作为系统工作平台，直接利用产品设计时零件在计算机内的图形信息，采用人机交互方式进行数控编程，此系统适用于数控回转头冲床的自动编程，它是板金计算机辅助设计与制造（ＣＡＤ／ＣＡＭ）开发的关键。     

HD469单级减速驱动中桥总成失效分析

汽车实际运行中零件失效的表现往往较复杂,给失效分析工作带来很大的困难。本文结合HD469单级减速驱动中桥的失效,通过对拆开的桥的各个零件,尤其是出现异常零件的观察,运用系统推理分析思想,发现安装在差壳周圈上12.9级六角头螺栓掉头断裂是导致整个469单级桥总成发生严重失效的根本原因。     

A novel fuzzy logic correctional algorithm for traction control systems on uneven low-friction road conditions

The traction control system (TCS) might prevent excessive skid of the driving wheels so as to enhance the driving performance and direction stability of the vehicle. But if driven on an uneven low-friction road, the vehicle body often vibrates severely due to the drastic fluctuations of driving wheels, and then the vehicle comfort might be reduced greatly. The vibrations could be hardly removed with traditional drive-slip control logic of the TCS. In this paper, a novel fuzzy logic controller has been brought forward, in which the vibration signals of the driving wheels are adopted as new controlled variables, and then the engine torque and the active brake pressure might be coordinately re-adjusted besides the basic logic of a traditional TCS. In the proposed controller, an adjustable engine torque and pressure compensation loop are adopted to constrain the drastic vehicle vibration. Thus, the wheel driving slips and the vibration degrees might be adjusted synchronously and effectively. The simulation results and the real vehicle tests validated that the proposed algorithm is effective and adaptable for a complicated uneven low-friction road.     

The effects of wheelset driving system suspension parameters on the re-adhesion performance of locomotives

In this study, in order to examine the effects of a wheelset driving system suspension parameters on the re-adhesion performance of locomotives, the stick–slip vibration was analysed according to theoretical and simulation analysis. The decrease of the slip rate vibration amplitude improved the stability of the stick–slip vibration and the re-adhesion performance of locomotives. Increasing the longitudinal guide stiffness of the wheelset and the motor suspension stiffness were proposed as effective measures to improve the re-adhesion performance of locomotives. These results showed that the dynamic slip rate was inversely proportional to the series result of the square root of the longitudinal guide and motor suspension stiffness. The larger the motor suspension stiffness was, the smaller the required longitudinal guidance stiffness was at the same re-adhesion time once the wheel slip occurred, and vice versa. The simulation results proved that the re-adhesion time of the locomotive was approximately proportional to amplitude of the dynamic slip rate. When the stick–slip vibration occurred, the rotary and the longitudinal vibrations of the wheelset were coupled, which was confirmed by train's field tests.     

无接触智能IC卡在收费系统中的应用

探讨将智能 IC卡、射频识别技术、计算机技术三者相结合 ,应用于城市交通或高等级公路的不停车收费系统模型 ,以适应不断增长的交通运营管理的需求。