Big data driven dynamic driving cycle development for busses in urban public transportation

Field-relevant reference driving cycles, equivalent to real-life operation, are a prerequisite for the consistent development and testing of vehicles, their components, and control algorithms. Furthermore they are the basis for certification and type testing. However, a static cycle can easily be detected during vehicle testing, so that optimized control parameters could be used to obtain improved emission results under test conditions. In this paper, a novel method is described and applied to generate a dynamic driving cycle that statistically matches the real-life operation of a vehicle. The analysis is performed based on an extensive field data set obtained during an automated measurement campaign of public busses for more than a full year with 27,365 h of operation and 315,583 km driven in the city of Hamburg (Germany). The data collected is statistically compared to the static reference cycles New European Driving Cycle (NEDC) and Worldwide harmonized Light Vehicles Test Procedure (WLTP). Two micro trip models with increasing complexity are described and fit to the data set. All models are quantitatively compared to the measured data set applying a Quality of Fit (QoF) indicator. Based on the highest consistency to field data, a non-deterministic driving cycle generator is developed and its output is statistically compared to the original measurement. In contrast to the existing reference cycles, the dynamic output of the non-deterministic driving cycle generator presented in this paper is statistically proven to be consistent with real-life operation of public busses in the urban environment of Hamburg.     

基于坐垫体压分布的驾驶员生理状态识别方法

提出一种基于坐垫体压分布识别长途驾驶过程中驾驶员生理状态的方法.开展长途驾驶模拟试验,采集9名被试者在驾驶过程中的坐垫体压分布数据,提取82维分类特征,再采用序列浮动前向选择算法从中选出55维最优特征子空间.试验结果表明,该方法能准确识别驾驶员生理状态,贝叶斯分类正确率可达93.37％.     

刍动变速器整车台架试验技术研究

针对自动变速器道路试验的局限性，在自主研发的自动变速器整车台架试验设备基础上，论述了换挡点、锁止点、发动机制动功能、强制降挡功能等整车台架试验项目的设计、参数选取及结果分析方法，并进行了试验考核和对比研究。研究结果表明，试验技术具有较好的适应性，试验结果能准确反映车辆自动变速器的性能，较道路试验具有明显的优势，可作为维修故障判定和维修质量检验的依据。     

基于组合自动优化策略的水下机器人型线设计（英文）

In this paper, a hybrid automatic optimization strategy is proposed for the design of underwater robot lines. Isight is introduced as an integration platform. The construction of this platform is based on the user programming and several commercial software including UG6.0, GAMBIT2.4.6 and FLUENT12.0. An intelligent parameter optimization method, the particle swarm optimization, is incorporated into the platform. To verify the strategy proposed, a simulation is conducted on the underwater robot model 5470, which originates from the DTRC SUBOFF project. With the automatic optimization platform, the minimal resistance is taken as the optimization goal; the wet surface area as the constraint condition; the length of the fore-body, maximum body radius and after-body's minimum radius as the design variables. With the CFD calculation, the RANS equations and the standard turbulence model are used for direct numerical simulation. By analyses of the simulation results, it is concluded that the platform is of high efficiency and feasibility. Through the platform, a variety of schemes for the design of the lines are generated and the optimal solution is achieved. The combination of the intelligent optimization algorithm and the numerical simulation ensures a global optimal solution and improves the efficiency of the searching solutions.     

Analysis of three independent real-world driving studies: A data driven and expert analysis approach to determining parameters affecting fuel economy

It is well established that individual variations in driving style have a significant impact on vehicle energy efficiency. The literature shows certain parameters have been linked to good fuel economy, specifically acceleration, throttle use, number of stop/starts and gear change behaviours. The primary aim of this study was to examine what driving parameters are specifically related to good fuel economy using a non-homogeneous extended data set of vehicles and drivers over real-world driving scenarios spanning two countries. The analysis presented in this paper shows how three completely independent studies looking at the same factor (i.e., the influence of driver behaviour on fuel efficiency) can be evaluated, and, despite their notable differences in location, environment, route, vehicle and drivers, can be compared on broadly similar terms. The data from the three studies were analysed in two ways; firstly, using expert analysis and the second a purely data driven approach. The various models and experts concurred that a combination of at least one factor from the each of the categories of vehicle speed, engine speed, acceleration and throttle position were required to accurately predict the impact on fuel economy. The identification of standard deviation of speed as the primary contributing factor to fuel economy, as identified by both the expert and data driven analysis, is also an important finding. Finally, this study has illustrated how various seemingly independent studies can be brought together, analysed as a whole and meaningful conclusions extracted from the combined data set.     

人机协作系统中车辆轨迹规划与轨迹跟踪控制研究

自动驾驶系统需具备响应驾驶人意图且有效执行驾驶人意图的能力，以解决人机协作系统中存在的人机冲突、人机优势融合等问题。提出决策层“以人为主”、执行层“以机为首”的人机协作关系，构建包含驾驶人意图识别模块、基于意图识别的轨迹规划模块与轨迹跟踪控制模块的人机协作一体化控制系统框架，并重点对轨迹规划模块与轨迹跟踪控制模块开展研究。首先，结合双向长短期记忆神经网络（Bi-directional Long Short Term Memory，Bi-LSTM）与注意力机制模型建立换道轨迹规划模型；在改进人工势场算法中引入模型预测控制并建立避险轨迹规划模型。其次，通过开展驾驶模拟器试验建立换道与避险驾驶行为数据集，为拟人化模型训练和模型参数确定提供支撑。然后，综合考虑车辆状态变量、控制输入与输出以及道路结构参数等约束条件，构建基于最优转向前轮输入的线性时变模型预测轨迹跟踪控制器，实现对规划轨迹的精准跟踪。最后，基于驾驶模拟器搭建人机协作系统硬件在环测试平台，对轨迹规划模块与轨迹跟踪控制模块开展硬件在环测试与验证。结果表明：换道与避险规划轨迹光滑且平稳，轨迹跟踪控制过程中，车辆航向角与前轮转角变化平稳；所构建的轨迹规划与轨迹跟踪控制模块在确保安全性前提下可实现不同场景中的车辆运动控制需求。     

城市水下道路隧道驾驶安全影响因素分析和改善思路

总结城市水下道路隧道事故分布规律，从驾驶人、隧道光环境及道路条件3方面分析隧道驾驶安全影响因素，对现有安全改善措施及其优缺点进行剖析，并指出城市水下道路隧道驾驶安全优化研究趋势： 应以提升隧道光环境质量为主，考虑交通事故形态、事故致因及影响因素，在确保交通安全的基础上，考虑不同隧道路段驾驶人差异化视觉需求。驾驶人视觉需求可以分为功能性、安全性与舒适性需求，对应的隧道行车环境可分为基本型、安全型与舒适型视觉参照系。提出以构建城市水下道路隧道舒适型视觉参照系为目标，通过隧道照明与隧道视线诱导技术相结合，缓解隧道出入口参照系的剧烈过渡，加强中间段弱视觉参照的城市水下道路隧道驾驶安全优化方法。构建基于空间路权、人因与驾驶任务、差异性与韵律性的隧道驾驶安全优化评价指标体系，为城市水下道路隧道驾驶安全优化提供新思路。     

基于中国人体驾乘姿态的汽车人机空间布置研究

合理的人机空间布置对汽车的舒适性与安全性至关重要,人体驾乘姿态是汽车人机空间布置的依据。文章设计试验,扫描得到500样本分别在8辆车中的驾乘姿态数据,对数据进行统计分析,建立驾驶员座椅适宜线方程与中国人体2D模板,基于标杆车进行验证,结果显示,方程及模板精度较高,符合中国人体驾乘特征。该研究为汽车人机空间布置提供理论依据,为研发适合中国人驾乘的车辆提供支撑,对建立中国汽车人机设计体系具有重要意义。     

孤石与基岩爆破处理对泥水盾构掘进参数的影响分析

为有效降低海底复杂地层中盾构开挖范围内遇到的孤石或基岩突起对盾构刀具的损坏程度,降低施工风险和提高施工效率,以台山核电站1#、2#海底取水隧洞工程为依托,采用钻探和物探的方法确定孤石和基岩的分布规律,并制定陆地和海面钻孔爆破处理方案。通过对孤石群和基岩段爆破前后盾构掘进过程中的掘进速度、每环掘进时间、掘进推力等掘进参数进行对比分析可知： 1）爆破后基岩段盾构掘进速度提高了约68.2%,平均每环掘进时间节省了约45.1%,平均掘进推力降低了约11.5%; 2）孤石群爆破段与正常掘进段盾构参数基本一致; 3）孤石群和基岩爆破达到了预期效果,消除了基岩突起和孤石群对盾构掘进的威胁,保证了盾构掘进的顺利施工。     

基于 GJB7691-2012的通用数字示波器自动检定关键技术的研究*

作为一款时域电子测试仪器,示波器在科研、电力、医疗等多个方面得到了广泛的应用,随着计算机技术的不断进步,性能强大的数字示波器应运而生,同时,自动控制技术的普及使得数字示波器自动校准检定成为可能。论文以最新的数字示波器检定规程GJB7691‐2012为基础,针对新规程在检定与计算方法上的调整进行了分析,结合虚拟仪器与数据库技术完成了一种基于FLUK E9500B的通用数字示波器自动检定系统的设计,并就其关键技术进行了研究,同时通过试验结果比较验证了该方案的可靠性与可行性,并在计量工作中得到应用。