A second order volume of fluid （VOF） scheme for numerical simulation of 2-D breaking waves

Among all environmental forces acting on ocean structures and marine vessels, those resulting from wave impacts are likely to yield the highest loads. Being highly nonlinear, transient and complex, a theoretical analysis of their impact would be impossible without numerical simulations. In this paper, a pressure-split two-stage numerical algorithm is proposed based on Volume Of Fluid (VOF) methodology. The algorithm is characterized by introduction of two pressures at each half and full cycle time step, and thus it is a second-order accurate algorithm in time. A simplified second-order Godunov-type solver is used for the continuity equations. The method is applied to simulation of breaking waves in a 2-D water tank, and a qualitative comparison with experimental photo observations is made. Quite consistent results are observed between simulations and experiments. Commercially available software and Boundary Integral Method (BIM) have also been used to simulate the same problem. The results from present code and BIM are in good agreement with respect to breaking location and timing, while the results obtained from the commercial software which is only first-order accurate in time has clearly showed a temporal and spatial lag, verifying the need to use a higher order numerical scheme.     

对ANN技术表达船体曲线算法的改进

应用人工神经元网络（ANN）技术表达船体曲线。根据问题性质,选用小波基作为前向单层神经网络的神经元激励函数,结合逐层学习（OHLO）算法对一艘3．6万吨散货船的后半体进行了表达。编程运算结果表明,该方法速度较传统的BP算法有较大提高。     

A two-phase model for dry port location with an application to the port of Dalian in China

This paper provides guidance for an optimal and reasonable dry port layout for the port of Dalian in China. We present a two-phase framework on the location of dry ports, which solves the selection of candidate inland cities and optimal dry port location choice, respectively. Fuzzy C-Means Clustering is applied to select alternative cities in the vast hinterland of the seaport of Dalian, with a view to identify evaluation factors that affect the location selection decision. A cost-minimisation linear programming solution is proposed, with the aid of a genetic algorithm, to choose the optimal location as well as capacity level among the candidate inland cities.     

Large-scale evacuation network optimization: a bi-level control method with uncertain arterial demand

To improve the efficiency of large-scale evacuations, a network aggregation method and a bi-level optimization control method are proposed in this paper. The network aggregation method indicates the uncertain evacuation demand on the arterial sub-network and balances accuracy and efficiency by refining local road sub-networks. The bi-level optimization control method is developed to reconfigure the aggregated network from both supply and demand sides with contraflow and conflict elimination. The main purpose of this control method is to make the arterial sub-network to be served without congestion and interruption. Then, a corresponding bi-objective network flow model is presented in a static manner for an oversaturated network, and a Genetic Algorithm-based solution method is used to solve the evacuation problem. The numerical results from optimizing a city-scale evacuation network for a super typhoon justify the validity and usefulness of the network aggregation and optimization control methods.     

基于CFD技术的暖风芯体结构设计与优化分析

某在研改款商用车空调箱暖风芯体单体换热性能较差,根据对标件初步优化后发现其换热性能更差,因此进行CFD定性仿真分析。通过流体分析研究发现基础模型芯体内部各扁管流量分配不均,初步优化后扁管流量分配更加不均匀,极大地降低了其换热性能,与试验反馈结果一致。根据流场仿真结果对其水室结构逐步优化,使得扁管流量分配比例的标准差值各工况下均提升了44%以上且芯体内流阻降低了约一倍。最终通过试验验证,单芯体的换热性能提高了3%-8%,满足了设计要求。     

铁路客车轮对踏面硌伤自动分析系统的研究与实现

为了解决客车轮对踏面硌伤人工分析效率低且质量不高的问题,基于大数据关联分析技术,构建了一套硌伤自动分析系统.从硌伤排查、自动分析、故障定位、统计分析4个方面分析系统的主要组成和功能,探讨了实现系统的关键技术.系统的应用提高了对客车轮对踏面硌伤分析和故障排查的效率.     

牵引车车架横梁开裂分析及优化改善

针对某牵引车车架横梁开裂事件,使用Creo构建整车三维模型,导入Hyperworks中进行前处理网格划分等,使用Optistruct进行求解得出弯曲、制动、左转弯、右转弯、扭转、扭转+转弯工况等分析结果,将结果与实际开裂情况进行了对比,结果表明在扭转+转弯工况下第三横梁开裂,与分析结果一致,并提出横梁优化方案进行求解,分析结果表明在扭转+转弯工况下,第二横梁最大应力值降低38.1%,第三横梁最大应力值降低64.3%,提出后续牵引车设计时横梁优化意见及注意事项。     

FSAE赛车前悬架运动学仿真及参数优化

运用Catia软件建立某FSAE赛车前悬架三维模型,并将Catia中的坐标转换成Adams软件中的坐标,建立Adams前悬架模型。针对该FSAE赛车前悬架进行双轮跳动运动学仿真,并对悬架传递比和前轮定位参数进行参数优化。     

城市公交线路模态工况构建方法研究

采用GPS设备对西安城市公交典型线路的运行工况进行实测,分别运用瞬态转模态方法和多目标优化法构建出城市客车模态工况。以8个特征参数相对误差为标准,对两种方法的精度进行了对比研究。研究表明,两种方法均能有效地完成工况构建,其中多目标优化法精度最高,瞬态转模态方法简单快捷,从而为工况构建方法的选取提供了思路和数据验证。     

进气系统的优化设计

FSAE赛车发动机进气系统结构参数影响充气效率。文章利用软件FLUENT对进气系统模型进行流场仿真,分析进气系统流场压力、速度等参数分布规律,研究进气歧管流量分布的均匀性,到达优化进气系统的目的。