轨道交通U型梁桥下部结构纵向水平线刚度合理值研究

针对轨道交通U型梁桥的具体结构形式,建立了桥上无缝线路梁轨相互作用空间非线性有限元计算模型。分析了轨道交通U型梁桥的无缝线路纵向附加力,并对轨道交通U型梁桥下部结构纵向水平线刚度合理值进行探讨。研究结果表明,我国《地铁设计规范》及《京沪高速铁路设计暂行规定》等规定的桥墩墩顶最小纵向水平线刚度值应用于轨道交通高架桥设计明显偏大,可适当放宽。     

小间距隧道施工监控量测分析及应用

对于临近既有隧道新建小间距隧道而言,由于两洞之间的相互影响,围岩及衬砌结构受力比较复杂,施工过程中的现场监控量测显得尤为重要,这既是对既有隧道结构安全性的检测,也是对新建隧道施工的妥当性以及加固措施有效性的评价。针对包西铁路通道新宝塔山施工中洞周收敛、拱顶下沉、围岩压力、喷射混凝土应力及钢架应力等进行了监控量测,确保施工的顺利进行。     

轮轨力测量在高速铁路轨道检测中的应用研究

随着世界高速铁路的快速发展,高速铁路轨道检测技术已突破传统的轨道几何检测,朝着综合检测的方向发展。结合安装在我国新一代高速综合检测列车CRH380B-002的轮轨力检测系统在高速铁路轨道检测中的实际应用情况,介绍了我国在高速铁路轨道综合检测领域的最新研究进展———基于轮轨力测量的高速铁路轨道检测技术,并提出了一种基于轮轨力测量的高速铁路轨道状态评判方法。基于轮轨力测量的轨道检测技术通过安装在固定车辆(一般为轨道检查车)的连续测量测力轮对测量轮轨之间的相互作用力,从对车辆运行安全性和轨道疲劳寿命影响的角度对轨道状态进行检测,指导轨道日常养护。该技术是高速铁路轨道综合检测的重要组成部分,是对传统轨道几何检测的有效补充和完善,它的投入运用将更好的保障高速铁路的安全运营。     

柔性桩与土相互作用非线性分析的增量传递矩阵法

对桩侧土采用非线性荷载传递函数,对桩端土采用线性荷载传递函数,同时考虑桩周土所分担的荷载对单桩荷载传递规律的影响,利用增量荷载传递矩阵法及微分方程的近似解法--子域法,推出了刚性承台下柔性桩与地基非线性相互作用的近似解析算式。为了验证该方法的可行性,通过试验将试验结果与有限元结果及该方法所得结果进行了对比,对比表明:该理论解与现场实测值、有限元计算值都非常接近。     

信号培训系统的虚实互动机制研究

从信号培训系统目前存在的问题出发,提出一种虚实互动的机制来构建信号培训系统的方法。研究结果表明,本方法可以针对目前信号培训的特点,建立能够适应不同线路环境,满足不同实物设备组成方式和实训实操要求的信号培训系统。     

Structural safety assessment procedure for membrane-type LNG CCS considering hydroelasticity effect

As environmental regulations have become more onerous, the demand for LNG and LNG carriers has increased. The LNG cargo containment system (LNG CCS) is one of the most important facilities in LNG carriers, and many membrane types of LNG CCS have been developed so far. Traditionally, sloshing model tests are performed and a series of statistical approaches are used to obtain design sloshing pressures. Then, these design loads are utilized to analyze the structural safety of LNG CCS. In the sloshing model test, the flat and almost rigid plate is used as the LNG CCS instead of a real model, and thus, the hydroelasticity effect cannot be considered. In the present research, the effect of hydroelasticity on sloshing pressure was investigated in a fluid-structure interaction simulation. A wet drop simulation was conducted, and its results subsequently were compared with wet drop experimental test results to ensure their validity. Then, two types of structure model, namely a flat-rigid plate model and a flat-flexible CCS model, were generated to investigate the effect of hydroelasticity. Also, a fluid hitting analysis model was devised to realize the sloshing phenomenon, and the two generated structure models were applied as the structure domain in the analysis. In the fluid hitting simulations, it was found that the hydroelasticity effect on sloshing pressure is significant. Thus, correction factors, which are quantitative values of the effect of hydroelasticity, were derived (and are proposed herein). Finally, a structural safety assessment procedure for consideration of the hydroelasticity effect was derived (and is suggested herein).     

Centrifuge modelling of pipe-soil interaction in clay with crust layer

Seabed in regions, such as the Gulf of Guinea and North West Shelf of Australia, may exhibit a crust layer where the undrained shear strength can be an order of magnitude higher than that of the immediately underlying sediment. This can complicate design of steel catenary risers, where fatigue depends on the cyclic vertical stiffness of the pipe-soil interaction. Potential punch-through of the riser into the underlying soft soil may invalidate design assumptions based on the pipe-soil stiffness within the crust layer. The long-term evolution of pipe-soil stiffness within the crust layer, which exhibits similar properties to an over-consolidated soil, is also poorly understood. This paper describes centrifuge model tests undertaken in a clay sample with a crust layer, simulating the punch-through process of a pipe under load control and investigating the pipe-soil stiffness during long-term cyclic loading tests under displacement control. Results confirm that the potential for punching-through the crust layer depends strongly on the relative ratio of pipe diameter to crust layer thickness. The long-term evolution of pipe-soil stiffness showed a steady increase after an initial remoulding stage in contractile soils (normally consolidated and lightly over-consolidated), but a steady reduction in the heavily over-consolidated, more dilatant, crust. The magnitude of pipe-soil stiffness changes (during both remoulding and reconsolidation) is governed by the over-consolidation ratio of the soil and the amplitude of the cyclic displacements. This study provides insights on the relevant cyclic stiffness to consider when assessing SCR fatigue life in over-consolidated soils and soils exhibiting a superficial crust layer.     

Time-domain coupled dynamic simulation for SFT-mooring-train interaction in waves and earthquakes

In this study, Submerged Floating Tunnel (SFT)-mooring-train coupled dynamics is solved in the time domain to investigate their dynamic and hydro-elastic interactions under wave and earthquake excitations. The SFT is modeled by the rod-FE (finite element) theory, and it is connected to mooring lines through dummy-connection-mass and linear and rotational springs. A 3D rigid-multi-body dynamic model is developed for train dynamics that consists of seven rigid bodies. The tunnel-train interaction is taken into consideration based on the wheel-rail correspondence assumption and the simplified Kalker linear creep theory. The developed computer simulation program is validated through comparisons with commercial programs and published results when possible. In the case of earthquake-induced dynamics of the coupled system, the effects of soil conditions, tunnel length, mooring interval, seismic-wave propagation, and seaquake are investigated. The magnitudes of the SFT downward motions induced by the moving train are small compared with the motions induced by earthquakes. The earthquake causes transient SFT responses especially at their lowest wet natural frequencies while high-frequency motions are induced by seaquake effect. Structural damping and seismic propagation play an important role in dynamic responses. The interaction of the tunnel and moving train is also evaluated for various train speeds in terms of the derailment and offload factors and riding-comfort criterion. For the given SFT and train designs, the offload factor and riding-comfort criterion can slightly exceed their limits at certain earthquake conditions with the speed as high as 70 m/s, which can be adjusted by reducing train speed.     

Mode jumping in the lateral buckling of subsea pipelines

Unburied subsea pipelines under high-temperature conditions tend to relieve their axial compressive stress by forming localised lateral buckles. This phenomenon is traditionally studied under the assumption of a specific lateral deflection profile (mode) consisting of a fixed number of lobes. We study lateral thermal buckling as a genuinely localised buckling phenomenon by applying homoclinic (‘flat’) boundary conditions. By not having to assume a particular buckling mode we are in a position to study transitions between these traditional modes in typical loading sequences. For the lateral resistance we take a realistic nonlinear pipe-soil interaction model for partially embedded pipelines. We find that for soils with appreciable breakout resistance, i.e., nonmonotonicity of the lateral resistance characteristic, sudden jumps between modes may occur. We consider both symmetric and antisymmetric solutions. The latter turn out to require much higher temperature differences between pipe and environment for the jumps to be induced. We carry out a parameter study on the effect of various pipe-soil interaction parameters on this mode jumping. Away from the jumps post-buckling solutions are reasonably well described by the traditional modes whose analytical expressions may be used during preliminary design.     

“学-导多元互动”教学模式对高校艺术设计教育的启示——以视觉传达设计教学为例

“学-导多元互动”教学模式是依据相关教育理论、教育观念以及结合现代远程开放教育发展的要求和实践而形成的重在体现以人为本,真正做到“以学习者为中心”,为学习者提供多元的服务,满足学习者的学习需要和求知愿望,构建终身学习体系和学习型社会的教育思想的教学模式。文章以视觉传达设计教学为例,从“学-导多元互动”教学模式的内涵、教学效果及对高校艺术设计教育的启示三个方面加以阐述,希望对于高校艺术设计教育教学模式的改革起到一些借鉴作用。