融合RCM、PHM和数据挖掘的城市轨道交通车辆维护决策技术研究

提出了一种用于轨道交通车辆系统维修决策的RCM(以可靠性为中心的维修)可靠性评估的新方法.针对轨道交通车辆系统故障机理复杂,影响因素冗多,提出基于RCM、PHM(故障预测与健康管理)和数据挖掘算法相融合的方法来构建系统的维护决策模型.与传统方法的区别在于,该方法能够更精准地定义维护模型,并获得系统的最优维护间隔,计算效...     

基于深度强化学习的智能船舶航迹跟踪控制

[目的]智能船舶的航迹跟踪控制问题往往面临着控制环境复杂、控制器稳定性不高以及大量的算法计算等问题。为实现对航迹跟踪的精准控制,提出一种引入深度强化学习技术的航向控制器。[方法]首先,结合视线(LOS)算法制导,以船舶的操纵特性和控制要求为基础,将航迹跟踪问题建模成马尔可夫决策过程,设计其状态空间、动作空间、奖励函数;然后,使用深度确定性策略梯度(DDPG)算法作为控制器的实现,采用离线学习方法对控制器进行训练;最后,将训练完成的控制器与BP-PID控制器进行对比研究,分析控制效果。[结果]仿真结果表明,设计的深度强化学习控制器可以从训练学习过程中快速收敛达到控制要求,训练后的网络与BP-PID控制器相比跟踪迅速,具有偏航误差小、舵角变化频率小等优点。[结论]研究成果可为智能船舶航迹跟踪控制提供参考。     

全自动运行线路车载无线通信设备的唤醒自检项方案

车载无线通信设备为地铁全自动运行提供了车地无线通话功能、乘客紧急对讲功能及控制中心对列车的广播功能,是列车安全运行的关键设备.介绍了无线车载台的设备结构及功能,根据全自动运行特点描述了无线车载台自检过程.结合全自动运行线路实际场景分析,总结得出列车唤醒车载无线设备的自检项.     

基于车辆自动定位数据的有轨电车运行效率分析与应用

结合有轨电车线路的现有车辆自动定位数据,分析有轨电车运行效率及其相关影响因素.其中,影响因素从站台、路段、交叉口3个方面进行考虑.定性分析了不同站台型式、站台位置、交叉口类型的属性特征,并量化不同路段的路段长度、所包含的交叉口个数,同时考虑了交叉口控制策略对有轨电车运行时间的影响.以某已运营的有轨电车线路为例,通过建立...     

Extreme hawser tension assessment for FPSO vessel during offloading operation in Bohai bay

The Floating Production Storage and Offloading Unit (FPSO) is an offshore vessel that produces and stores crude oil prior to tanker transport.Robust prediction of extreme hawser tensions during Floating Production Storage and Offloading (FPSO) operation is an important safety concern. Excessive hawser tension may occur during offloading operations, posing an operational risk. In this paper, AQWA has been used to analyze vessel response due to hydrodynamic wave loads, acting on a specific FPSO vessel under actual sea conditions. Experimental validation of numerical results has been discussed as well.This paper advocates methodology for estimating extreme response statistics, based on simulations (or measurements). The modified ACER (averaged conditional exceedance rate) method is presented in brief detail. Proposed methodology provides an accurate extreme value prediction, utilizing all available data efficiently. In this study the estimated return level values, obtained by ACER method, are compared to the corresponding return level values obtained by Gumbel method. Based on the overall performance of the proposed method, it is concluded that the improved ACER method can provide more robust and accurate prediction of the extreme hawser tension.Data declustering issue has been addressed. Paper highlights ability of ACER method to account for a set of varying sea state probabilities, as required in engineering long term statistical analysis.Described approach may be well used at the vessel design stage, while defining optimal vessel parameters that would minimize potential FPSO hawser tension.     

Local joint flexibility of tubular X-joints stiffened with external ring or external plates

In the present paper, the Local Joint Flexibility (LJF) of the ring-stiffened X-joints and plate-stiffened X-joints under compressive load is investigated. In the first phase, a finite element (FE) model was generated and verified with the results of available experimental tests and equations. In the next phase, a set number of 234 FE models were created to evaluate the role of the external ring size (β_r and τ_r), the external plate size (β_p and τ_p), and the connection geometry (γ, τ, and β) on the LJF factor (f_LJF). In these FE models, the weld connecting the chord and brace members was generated. The results indicated that the f_LJF of a plate stiffened joint can be down to 76% of the f_LJF of the corresponding un-stiffened joint. Also, the effect of the ring size on the f_LJF was more than the effect of the plate size on the f_LJF, because of the stiffener position. Despite the notable effect of the ring and the plate on the f_LJF, there is not any study or formula on tubular connections stiffened with ring or plate. Therefore, the FE results were used to propose two parametric formulas for determining the f_LJF in X-joints with external ring or external plate under brace compressive load. Moreover, the derived formulas were checked based on the UK DoE acceptance criteria.     

基于CATIA平台的三维集装箱导轨设计

在集装箱导轨设计中,存在着导轨需要安装的结构剖面多,不同剖面中连接肘板布置复杂,连接肘板种类繁多,重量统计繁琐等问题。该文基于计算机辅助三维交互应用(CATIA)平台,提出一种集装箱导轨的三维设计方法,利用CATIA的知识工程、参数化设计、统一装配等功能,有效提升了设计效率,使设计更加智能化,降低了后期修改工作量。     

FPSO内孤立波载荷实验观测及理论预报模型研究

利用大型密度分层水槽开展了下凹型内孤立波作用在FPSO上的载荷特性系列实验;并依据实验工况,考虑KdV、eKdV和MCC内孤立波理论的适用性条件,数值研究了FPSO内孤立波载荷成分构成;基于实验结果和载荷成分构成,建立了FPSO内孤立波载荷的理论预报模型.研究表明:FPSO内孤立波水平载荷由粘性力和Froude-Krylov力组成,而垂向载荷主要为垂向Froude-Krylov力;Froude-Krylov力可通过动压力沿FPSO浮体湿表面积分得到,粘性力则通过经实验回归的摩擦系数Cf、形状修正因数K乘以内孤立波诱导水质点切向速度沿FPSO浮体湿表面积分得到.系列实验结果得出:摩擦系数Cf和形状修正因数K与雷诺数Re、KC数和流体层深度比h1/h有关;摩擦系数与Re呈自然对数关系;而形状修正因数K与KC数呈幂函数关系.理论预报模型预报的水平载荷、垂向载荷结果均与系列实验和数值结果吻合较好,并且发现随着内孤立波振幅的增加,载荷幅值近乎线性增加,而且上层流体深度对水平力幅值有明显的影响.     

质子交换膜燃料电池接触电阻研究进展

质子交换膜燃料电池(PEMFC)接触电阻问题是制约其商业化发展的一个重要因素。影响接触电阻的因素可归纳为电池材料、组装参数、工作参数和其他因素。本文主要介绍了PEMFC的接触电阻及其影响因素,并综述了降低接触电阻的方法。     

船舶操纵模拟器上海洋山港港区三维视景仿真

针对船舶操纵模拟中的三维视景仿真的特点,开展船舶操纵模拟器中关于上海洋山港港区三维视景仿真的研究。以Google Earth提供的电子地形图像为基础,经过等高线和矢量化方法的处理,生成数字高程模型(Digital Elevation Model,DEM),并利用Multigen Creator建立直观的上海洋山港港区三维地形模型,再利用Vega的三维视景渲染功能对其进行渲染和驱动。根据该方法建立的上海洋山港港区三维视景模型库在模型精细度、逼真度和实时运算等方面,都能满足船员实操练习所需的条件。