公路网规划环境影响评价中的不确定性分析

公路网规划环境影响评价中的不确定主要来自公路网规划方案的不确定和环境信息的不确定。具有普遍性、传递性、累积性和可降低性,对决策者存在着较大的干扰,但是可以通过使用基于情景分析的预测方法、广泛开展公众参与以及通过多方协作的方式开展环境影响评价工作等方法来降低。     

典型钢桥面铺装结构的病害分类分析

本文结合国内外钢桥面铺装损坏的实际情况,分析总结了四种典型钢桥面铺装结构产生的病害情况,并在此基础上对钢桥面铺装的病害进行了分类。     

船上实施听力保护的技术要求及应用

船舶噪声对船员的听力损伤是众所周知的,甚至发生部分船员的永久性听力损失。国际海事组织第91届海安会通过了新的《船上噪声等级规则》,围绕实施噪声规则,分析了听力保护的技术要求和正确选用听力保护器的技术依据,探讨了佩戴听力保护器对语言交流和感受听觉信号造成的影响。强调必须开展听力损伤的风险评估,并对识别听力损伤的特殊风险因素提出了建议。     

Extension of the super-elements method to the analysis of a jacket impacted by a ship

The aim of this paper is to present a simplified analytical method for estimating the crushing resistance of an oblique cylinder impacted by the stem of a striking ship. The collision angle of the vessel is arbitrary, i.e. oblique collisions are also considered in this article. The two extremities of the tube are assumed to be clamped. These developments are intended to be used for evaluating the crashworthiness of an offshore wind turbines jacket. To achieve this goal, closed-form expressions are first derived for the particular situations of a horizontal and a vertical cylinder by applying the upper-bound method. An interpolation formula is then proposed to get the resistance opposed by the tube for any inclination angle. In order to validate these theoretical developments, some comparisons are made with the results of numerical simulations. These latter are performed using the finite elements software LS-DYNA. In almost all cases, the analytical prediction of the resistance is found to be in quite good agreement with the numerical ones. Finally, another comparison is made by simulating an OSV collision with a full jacket. In this case, the theoretical model is found to be insufficient for large impact energies and points out the need of further research.     

Using automated walking gait analysis for the identification of pedestrian attributes

Collecting microscopic pedestrian behavior and characteristics data is important for optimizing the design of pedestrian facilities for safety, efficiency, and comfortability. This paper provides a framework for the automated classification of pedestrian attributes such as age and gender based on information extracted from their walking gait behavior. The framework extends earlier work on the automated analysis of gait parameters to include analysis of the gait acceleration data which can enable the quantification of the variability, rhythmic pattern and stability of pedestrian’s gait. In this framework, computer vision techniques are used for the automatic detection and tracking of pedestrians in an open environment resulting in pedestrian trajectories and the speed and acceleration dynamic profiles. A collection of gait features are then derived from those dynamic profiles and used for the classification of pedestrian attributes. The gait features include conventional gait parameters such as gait length and frequency and dynamic parameters related to gait variations and stability measures. Two different techniques are used for the classification: a supervised k-Nearest Neighbors (k-NN) algorithm and a newly developed semi-supervised spectral clustering. The classification framework is demonstrated with two case studies from Vancouver, British Columbia and Oakland, California. The results show the superiority of features sets including gait variations and stability measures over features relying only on conventional gait parameters. For gender, correct classification rates (CCR) of 80% and 94% were achieved for the Vancouver and Oakland case studies, respectively. The classification accuracy for gender was higher in the Oakland case which only considered pedestrians walking alone. Pedestrian age classification resulted in a CCR of 90% for the Oakland case study.     

转向器齿轮齿条传动副的几何和啮合计算

齿轮齿条式转向器中的齿轮齿数仅有5～8个齿，按标准齿轮或简单变位齿轮的几何计算方法设计齿轮和齿争，无法使其重合度达到1.0.文章介绍了运用虚拟齿轮及当量齿轮的方法计算重合度，并通过大量计算得到参数选择表，方便设计师的查阅使用。阐述了齿轮齿顶圆齿厚计算方法、齿条齿根圆角及齿务齿根过渡曲线干涉验算方法。表明通过合理选择变位系数、齿顶高及齿根高，可以确保齿轮和齿顶圆齿厚达到0．3—0．5个模数，重合度达到1．0。并给出计算实例：     

基于SIMULINK的岸边集装箱起重机减摇系统仿真

在岸边集装箱起重机起升机构和小车运行机构模型的基础上建立简化的单摆模型,通过对模型的受力分析建立非线性方程.同时在MATLAB的SIMUUNK环境下对此模型进行动态仿真,达到通过控制小车的驱动力来控制吊具的摆角的目的.     

Design and evaluation of an integrated inventory and transportation system

This paper proposes the adoption of an integrated inventory and transportation system (IITS) to minimize the total costs of inventory and transportation. A non-linear programing is developed by analyzing transportation and inventory costs with one supplier and many retailers in the distribution environment. The paper compares the proposed model with the traditional approach in computing total costs with numerical data. The results indicate that the total costs can be optimized by adopting integrated programing rather than the traditional approach, along with achieving improved customer service levels. In particular, sensitivity analysis is applied to determine the performance of the IITS under various transportation costs, holding costs and shortage costs. It shows that the transportation cost per unit is most sensitive in the proposed model. In this situation, the IITS is more effective for cost saving when set-up cost, holding and shortage costs are high, but is less effective for situations involving high per-unit transportation costs.     

薄壁空心板纵向裂缝的畸变分析与试验研究

针对某跨海大桥空心板板底出现有规律的纵向裂缝,运用薄壁结构理论对薄壁空心板进行畸变分析,结合能量法和有限条法计算活载作用下薄壁空心板的畸变应力,并对现行空心板标准图的畸变进行了验算,同时进行了现场荷载试验,理论分析结果和试验结果证明薄壁结构的畸变效应是导致空心板板底出现纵向裂缝的主要原因。     

地铁盾构隧道施工对周边环境影响的监测

地铁盾构隧道在通过不良地质条件地段施工过程中会对地层产生扰动,可能引起地表及周边建筑物变形或沉降,尤其是隧道穿过正在施工的基坑止水幕墙时,可能会拉裂幕墙危及基坑及附近建筑物安全,因此必须进行监测。文章介绍了广州地铁盾构隧道施工过程中的第三方监测的经验和体会,可供同类工程施工中借鉴。