后置发动机城市公交车冷却系统的定性分析

简要介绍后置发动机城市公交客车冷却系统的布置结构,定性分析影响后置发动机城市公交客车冷却系统散热效果的各种原因,明确提高冷却系统散热效果的途径以及设计中的处理建议、注意事项等。     

电动汽车的蓄电池技术

电动汽车是21世纪汽车的发展方向。介绍了世界各国研究的电动汽车的蓄电池技术。     

基于键合图的车用蓄电池建模与仿真

按照键合图的规则,分别建立了蓄电池等效电路的键合图模型和冷却系统的键合图模型,然后将电系统和热系统耦合在一起,实现了蓄电池系统的键合图模型,最后建立了蓄电池的数学模型和仿真模型,并实现了动态仿真。     

EQ6110混合动力电动汽车再生制动控制策略研究

分析了电机再生制动对车辆制动性能的影响以及典型城市公交客车运行工况特点，提出了适于EQ6110HEV的再生制动控制策略——低制动强度时优先采用再生制动，高强度时按比例复合再生制动与摩擦制动。仿真计算表明：在各种循环工况下，EQ6110HEV采用这种再生制动控制策略均有较好的节能效果，可降低能耗10％～25％。     

基于CCP协议的HEV用ECU标定系统设计

CCP协议是基于CAN总线通信方式的车用ECU标定协议，具有通信可靠、传输速度快、通用性好等优点。在实时内核环境下设计了一套基于CCP协议的标定系统，并使用该系统实现了对混合动力电动汽车(HEV)动力系统中多个ECU同时标定的工作。     

基于ADVISOR2002混合动力汽车控制策略模块开发

介绍了混合动力汽车仿真软件ADVISOR中的并联控制策略，结合课题的实际情况，对ADVISOR2002的并联控制策略进行了二次开发，并针对某一车型进行了仿真对比，结果表明所提出的控制策略不仅能够鲁棒地在ADVISOR2002界面中运行，而且合理、可靠，满足实际需要。     

Bus Priority Using pre-signals

The need to provide efficient public transport services in urban areas has led to the implementation of bus priority measures in many congested cities. Much interest has recently centred on priority at signal controlled junctions, including the concept of pre-signals, where traffic signals are installed at or near the end of a with-flow bus lane to provide buses with priority access to the downstream junction. Although a number of pre-signals have now been installed in the U.K., particularly in London, there has been very little published research into their design, operation and optimisation. This paper addresses these points through the development of analytical procedures which allow pre-implementation evaluation of specific categories of pre-signals. The paper initially sets out three categories of pre-signal, which have different operating characteristics, different requirements for signalling and different impacts on capacity and delay. Key issues concerning signalling arrangements for these categories are then discussed, together with a summary of the analytical approach adopted and the assumptions required. Equations are developed to allow appropriate signal timings to be calculated for pre-signalised intersections. Further equations are then developed to enable delays to priority and non-priority traffic, with and without pre-signals, to be estimated with delay being taken here as the key performance criterion. The paper concludes with three application examples illustrating how the equations are applied and the impacts of pre-signals in different situations.The analyses confirm the potential benefits of pre-signals, where these signals apply to non-priority traffic only. Where buses are also subject to a pre-signal, it is shown that disbenefits to buses can often occur, unless bus detectors are used to gain priority signalling.     

基于MTG的永磁电机启动性能研究

高速永磁电机是MTG发电的关键技术之一，通常采用变频调速的启动方法。高速和高频的特性，决定了高速电机的设计与普通电机有较大的不同。通过建立数学模型，采用仿真的方法可以较准确获得永磁电机的启动性能。     

低噪声电站噪声测量问题

分析了现实采用的几种移动电站噪声测量方法，根据实际发展需要。针对噪声测量中存在的一些问题，提出了低噪声电站噪声测量方法的一些看法。     

高速公路机电系统升级的趋势、现状和要点

中国高速公路的不断建设,对高速公路机电系统提出了更高的要求.介绍了机电系统现状,分析了其将来的发展趋势,并指出了升级的要点.