论消防船的设计

国家经济快速发展,大量的消防船需要设计建造,本文就消防船设计中采用规范、消防船设计特点、消防能力的确定、船型及型线设计、尺度选择、消防设备配套选择、消防船总体及主要设备布置等方面进行简要论述。     

一种结构垂向冲击载荷测量方法分析研究

某些作用在舰船结构上的瞬态动载荷,由于受到客观条件限制（比如空间狭小）,不方便直接通过压力传感器获得其大小,而该载荷对于船体结构设计又关系重大,如何取得外载荷曲线便成了十分关键的问题。针对实船某承受特殊冲击载荷的基座结构,通过测量其结构动应变,利用材料应变-应力关系曲线得出了冲击载荷的时间历程曲线,最后用有限元法对该冲击载荷测量曲线进行验证。结果表明,当结构应变率小于3mm/mm/s时,可采用静态材料应变-应力关系曲线对结构冲击载荷进行测量计算,从而为此类结构外载荷测量方法提供参考。     

柴油机船舶推进装置的建模和实时仿真

本文根据准稳态的概念建立了适用于实时仿真的二冲程柴油机船舶推进装置的多阶一性模型。在充分多的试验数据的基础上，结合工作原理建立了各子系统及整个装置的动态模型，这种模型既能反映柴油机内部各参数，精度较高，计算工作量也比较适中。文中提出了一些经验公式，使模拟得以有效地简化。最后，作为实例给出了３５０００吨油船推进装置的实时仿直     

潜艇薄壁大半径圆柱壳的总稳定性

本文指出了用仅受轴向压力的无肋光壳来预报各向均匀受压的异常环肋圆柱壳的总稳定性具有足够的精度，在薄壁大半径环肋圆柱总稳定模型试验中首次观察到了纵向失稳半波数m＝5，在纵横加肋圆柱壳总稳定模型试验中证明了在异常环肋圆柱壳上增设纵骨对提高总稳定性有巨大作用。此外，还指出了本文所推荐的纵横加肋圆柱壳总稳定理论临界压力公式是各种有关公式中最合适的计算公式．     

Experimental investigation on scour development and scour protection for offshore converter platform

Local scour around the offshore converter platform caused by current and wave will lead to the instability of foundation. A series of experiments are performed to investigate the scour development and scour protection of the offshore converter platform. The development and evolution characteristics of the local scour around the gravity based structure foundation under the actions of current flow and wave are analyzed. The results show that the edge scour mainly occurs at the lateral sides of the platform and the scour pits are symmetrical about the centerline of the platform in the streamwise flow direction. The scour depth around the gravity based structure increases with the increase of flow velocity. The inclination and collapse of the platform is observed at α = 90° and U₀ = 0.25 m/s. The sand ripples are observed around the gravity based structure under the wave action, and the scour depth increases with the increase of wave height and wave period. Based on the comparisons of different scour protection methods, the combined bionic grass-geotextile-riprap protection has the best scour protection efficiency for the offshore converter platform.     

Solution of an unstable inverse problem: wave source evaluation from observation of velocity distribution

This paper illustrates how to estimate a wave source generating a wave system, including local waves, with the assumption of linear dispersive waves of two dimensions. The estimation of wave source is realized by using an inverse problem. Unfortunately, the inverse problem is ill-posed in the sense of stability, since the wave source information included in local waves diminishes as the distance from the wave source increases. In the area of applied mathematics, there are well-developed methods to tackle ill-posed problems, which are called regularizations. In this paper, three different regularizations which are well known in applied mathematics are introduced and investigated to learn whether they are applicable to the present problem of the estimation of wave source. From the numerical experiments, it is shown that the estimation is realized by the regularizations introduced in this study, so that they can be applied to the determination of a wave source generating a wave system including local waves. Received: June 6, 2000 / Accepted: February 7, 2001     

Modelling navigation in muddy areas through captive model tests

Many access channels and harbours suffer from sedimentation and formation of mud layers. To keep navigation safe and economic, extensive maintenance dredging is needed. Until now, the required level of dredging has always been determined by making use of the physical characteristics of the mud layer, which does not necessarily result in efficient dredging. Ship behaviour also matters, and knowledge of ship manoeuvrability can help to redefine the level of dredging required. A mathematical model of manoeuvring for simulation purposes, based on a comprehensive series of captive model tests, is presented, along with a selection of results.     

基于非饱和土有限元强度折减法的降雨入渗条件下高边坡施工稳定性分析

根据质量守恒定律推导了非饱和土渗流分析控制方程,采用全隐式向后差分格式求解此类有限元问题;将非饱和土有限元强度折减法应用于某高边坡工程的施工稳定性分析,得到了该边坡在各施工阶段下受到降雨入渗作用影响后的稳定安全系数及其失稳滑动面,并通过与不考虑降雨作用时的情况进行对比得出有益的结论;最后,针对该边坡的施工稳定性分析结果提出了加固建议。     

洋山港及邻近海域悬沙输运特征研究*

基于SWEM2D数值模型,建立了一个范围包括洋山港、长江口及杭州湾的二维水流泥沙数学模型。根据2004年5月洋山港实测水文泥沙资料,认为洋山港区域悬沙垂向切变输运较小,可忽略该项对悬沙输运的影响,采用二维泥沙数学模型能基本反映出该区域悬沙输运特点。利用2004年5月洋山港及邻近海域实测水文泥沙资料对模型计算结果进行验证,验证结果表明模型计算结果与实际情况吻合良好。在此基础上,根据模型计算结果计算了洋山港及邻近海域大、中、小潮期间悬沙输运速度。结果表明,洋山港区域悬沙主要以欧拉输运为主,斯托克斯漂移、潮泵输运为辅。该区域西口门高含沙量主要是受到长江口及杭州湾悬沙输运富集的影响。其邻近海域主要的悬沙输运在近南汇边滩以东区域分成两股,一股向北,一股沿着南汇南岸的水下泥沙通道,径直流向杭州湾,并在杭州湾的悬沙输运的带动下,向洋山港流去。     

大连港矿石专用码头泊位升级改造工程护舷悬挑钢架结构创新设计

介绍大连港矿石专用码头泊位升级改造工程护舷改造钢架结构的设计情况,在国内码头升级改造工程中该结构尚属首例。根据护舷钢架的受力特点,比较了两个护舷钢架的设计方案后,最后选用了放射竖板加顶底板的方案。详细介绍了护舷改造钢架的设计分析方法,同时介绍了在安装过程中出现的问题和解决方案。