The Origins and Early Implementation of the Magnuson-Stevens Fishery Conservation and Management Act of 1976

The Magnuson-Stevens Fishery Management and Conservation Act, enacted in 1974, is the primary federal fishery management legislation in the United States. The political impetus that led to enactment was the extensive foreign fish off U.S. shores that expanded following World War II and the failure of international negotiations to prevent the decline in many fisheries relied upon by domestic fishers. In Congress, there was uncertainty as to whether a comprehensive management program would be created along with a unilateral extension of fishery management jurisdiction out to 200 nautical miles. The delay in agreement over a new United Nations Law of the Sea Treaty and resolution of the extent of coastal nation jurisdiction over fisheries culminated in enactment of the legislation sponsored by Senator Warren Magnuson, a Democrat from Washington State, and Senator Ted Stevens, a Republican from the State of Alaska.     

公交车中途停靠站长度预测方法研究

根据车辆泊松到达分布,运用概率分布与数理统计方法,分析公交线路条数、发车频率以及到达公交车中途停靠站时间分布之间的关系,建立同时到达车辆数概率模型,据此确定某一概率水平下公交车中途停靠站设计停车位数量及车站长度。以北京菜市口公交车中途停靠站为例,运用模型进行演算,并与实际观测值进行对比验证,提出将公交车中途停靠站向交叉口靠近从而方便换乘的改善方案。     

效率评定在客车标准作业时间制定中的应用

介绍效率评定的概念,阐述效率评定在客车标准作业时间制定实践中的应用。     

概述客车底盘管路技术

根据客车底盘总成的分类，简介客车底盘的管路及技术。     

基于RFID电子车牌数据的公交行程时间预测方法

为了给公交优先信号配时系统提供足够的"思考"时间和准确的控制依据,基于重庆市RFID电子车牌数据提出了一种采用自适应渐消卡尔曼滤波和小波神经网络组合模型动态预测公交行程时间的方法。综合分析公交行程时间的动态和静态影响因素,选取的模型输入参量为标准车流量、路段车辆平均行程时间、平均车速离散性和前班次公交行程时间。利用RFID电子车牌系统采集重庆市鹅公岩大桥路段车辆行驶数据,选取3 000组实际运行数据完成公交行程时间预测模型的训练,另筛选50组数据验证模型的有效性和准确性。研究结果表明：组合模型可动态自适应预测公交行程时间,预测值平均相对误差为3.23%,绝对误差集中在8 s左右,明显优于2种单一模型和基于传统GPS数据的公交行程时间预测模型,可认为选择RFID电子车牌数据作为组合模型的输入,能够明显改善模型预测精度;组合模型预测值的残差分布更为集中、鲁棒性较好,泛化能力强。选择平均绝对误差值、均方根误差值和平均绝对百分比误差作为模型评价指标,结果进一步表明,组合模型的综合预测效果明显优于单一的自适应渐消卡尔曼滤波和小波神经网络。研究方案可为先进公交信息化系统提供良好的技术支撑。     

客车冷却系统风扇驱动方式研究

总结客车冷却系统风扇的多种驱动方式,研究各种驱动方式对客车总布置、噪声等方面的影响。     

基于RMA方法的汽车车身CAN总线优化设计

针对汽车车身控制信息的高实时性和车身CAN系统扩充的高灵活性等特殊要求,介绍用于实时系统分析的速率单调分析(RMA)方法,在原总线利用率、信息最坏响应时间等实时性指标基础上引入总线扩展灵活性因子进行车身CAN总线方案的寻优设计,并以典型汽车车身控制系统为例,对单信号方案和信号组合方案进行实时性和扩展灵活性对比分析,在线试验结果验证了理论分析数据的正确性。     

大中型客车全承载车身骨架设计探讨

分析了国外全承载车身的结构及特点,探讨了车身各大总成的结构、设计以及各大总成之间的连接对全承载车身结构设计的影响。     

Role of the Railways in the Future of Air Transport

Abstract

The role of the railways in the air transport industry is usually limited to provision of access to airports. However, the development of high-speed rail networks and the congestion and environmental problems faced by the air transport industry suggest the railways could have a greater role in working with the airlines to provide an integrated transport service for medium-distance journeys (up to 800 km). Many air journeys involve two flights and a transfer at a hub airport. The alternative being investigated here would replace air journeys by a rail journey and a flight, and a transfer between them at the hub airport. Such integration could offer a positive alternative to aircraft on some routes and lead to railway journeys to airports becoming part of air transport services, and not only to provide access to them. Integration could therefore provide a better use of available air capacity rather than duplicating some high-speed rail routes and services.     

中央导向新交通系统在国内的应用前景

介绍一种新型胶轮承重、中央钢轨导向的交通系统,该系统具有人性化、环保、节能、技术性能突出、运量适中、工期短、综合造价较低等特点。通过详细分析,指出其适用范围,重点说明新交通系统在道路断面、车站、导轨等方面的土建设计技术,以及供电系统、信息系统、车辆基地等主要设备系统配置的技术特点,阐述该系统与城市轨道交通的关系,展望其在中小城市和大城市的发展前景和方向。