A hybrid deep learning based traffic flow prediction method and its understanding

Deep neural networks (DNNs) have recently demonstrated the capability to predict traffic flow with big data. While existing DNN models can provide better performance than shallow models, it is still an open issue of making full use of spatial-temporal characteristics of the traffic flow to improve their performance. In addition, our understanding of them on traffic data remains limited. This paper proposes a DNN based traffic flow prediction model (DNN-BTF) to improve the prediction accuracy. The DNN-BTF model makes full use of weekly/daily periodicity and spatial-temporal characteristics of traffic flow. Inspired by recent work in machine learning, an attention based model was introduced that automatically learns to determine the importance of past traffic flow. The convolutional neural network was also used to mine the spatial features and the recurrent neural network to mine the temporal features of traffic flow. We also showed through visualization how DNN-BTF model understands traffic flow data and presents a challenge to conventional thinking about neural networks in the transportation field that neural networks is purely a “black-box” model. Data from open-access database PeMS was used to validate the proposed DNN-BTF model on a long-term horizon prediction task. Experimental results demonstrated that our method outperforms the state-of-the-art approaches.     

城市轨道交通槽形梁设计参数优化研究

以跨径为30 m的城市轨道交通槽形梁为研究对象,采用精细化有限元方法研究槽形梁设计几何参数梁高、道床板厚度及角隅斜率对其力学性能的影响。分析结果表明:槽形梁主梁截面刚度随梁高的增加而增加,在给定跨径30 m的情况下存在最佳梁高1.8 m;道床板厚度与横向跨度有关,横向跨度为4 m时,适宜的道床板厚度是0.26 m;角隅斜率对槽形梁的影响主要表现在结合处的力学性能,推荐使用1:(2.5~3.0)。     

基于基准有限元模型的箱梁TMD振动控制研究

针对高架桥梁结构引起的振动噪声问题,研究TMD控制箱梁结构振动的特性。为了获得精准的箱梁有限元模型,首先以铁路32 m简支箱梁桥为原型,按10:1的几何相似比设计制作简支箱梁缩尺试验模型,应用ANSYS软件建立初始动力有限元模型;对有限元模型模态分析与试验模型模态测试得到的自由模态信息进行误差分析,并采用基于灵敏度分析的模型修正技术对初始动力有限元模型弹性模量和密度进行修正,得到基准有限元模型,误差确认结果显示修正后的有限元模型更精准地反应箱梁的振动特性;进一步利用基准有限元模型,开展TMD控制简支箱梁桥振动的研究,研究结果表明TMD对于抑制桥梁竖向共振有很好的效果。     

北京新机场线一期8.8m直径隧道盾构选型研究

依托北京新机场线一期工程07标段,从刀盘类型、刀盘驱动设备、刀具型式、刀具布置、渣土改良系统和同步注浆系统等方面对盾构选型进行研究。通过分析工程特点、总结以往工程经验、理论计算等方法得出结论:在全断面砂卵石地层中,辐条式刀盘适应性更佳;先行刀与刮刀组合的破岩方式以及先行刀的高差设置,有利于盾构掘进开挖土体;渣土改良材料注入口布置应充分考虑地质条件。     

Coloured Petri net-based traffic collision avoidance system encounter model for the analysis of potential induced collisions

The Traffic Alert and Collision Avoidance System (TCAS) is a world-wide accepted last-resort means of reducing the probability and frequency of mid-air collisions between aircraft. Unfortunately, it is widely known that in congested airspace, the use of the TCAS may actually lead to induced collisions. Therefore, further research regarding TCAS logic is required. In this paper, an encounter model is formalised to identify all of the potential collision scenarios that can be induced by a resolution advisory that was generated previously by the TCAS without considering the downstream consequences in the surrounding traffic. The existing encounter models focus on checking and validating the potential collisions between trajectories of a specific scenario. In contrast, the innovative approach described in this paper concentrates on quantitative analysis of the different induced collision scenarios that could be reached for a given initial trajectory and a rough specification of the surrounding traffic. This approach provides valuable information at the operational level. Furthermore, the proposed encounter model can be used as a test-bed to evaluate future TCAS logic changes to mitigate potential induced collisions in hot spot volumes. In addition, the encounter model is described by means of the coloured Petri net (CPN) formalism. The resulting state space provides a deep understanding of the cause-and-effect relationship that each TCAS action proposed to avoid an actual collision with a potential new collision in the surrounding traffic. Quantitative simulation results are conducted to validate the proposed encounter model, and the resulting collision scenarios are summarised as valuable information for future Air Traffic Management (ATM) systems.     

CACC车头时距与混合交通流稳定性的解析关系

研究协同自适应巡航控制(Cooperative Adaptive Cruise Control，CACC)车头时距对不同CACC比例下混合交通流稳定性的影响关系，进而为CACC车头时距设计提供参考. 应用优化速度模型(Optimal Velocity Model，OVM)作为手动车辆的跟驰模型，PATH真车实验标定的模型作为CACC车辆的跟驰模型. 基于传递函数理论，推导混合交通流稳定性判别条件，计算关于CACC比例与平衡态速度的混合交通流稳定域. 分析混合交通流在任意速度下稳定所需满足的临界CACC比例与CACC车头时距的解析关系，提出随CACC比例增加的可变 CACC车头时距设计策略，并通过数值仿真实验验证所提可变CACC车头时距策略的正确性. 研究结果表明：在所提可变CACC车头时距策略下，CACC车头时距随CACC比例增加而逐渐降低，避免取值较大影响混合交通流通行能力的提升；当CACC比例大于35%时，混合交通流在任意速度下稳定.研究结果可为大规模CACC真车实验的实施提供理论设计参考.     

船用厨房和具有烹调设备的配餐室的通风计算及空气处理方法

本文介绍了ISO 9943-2009国际标准和GBT 20846-2007中国国家标准中对船用厨房和具有烹调设备的配餐室的通风计算及空气处理中提出的送风量的计算方法，提出另一种更易于大家理解和接受的简易计算方法和空气处理过程，供工程技术及设计研究人员参考。     

基于CFD的中低速Wigley船模黏性阻力

船舶阻力性能对船型参数的确定、船体结构的设计有重要影响。本文以Wigley船模为研究对象，采用CFD方法建立了行船阻力分析系统，以实际海况数据为依据，确定较准确的参数和边界条件，分析了不同航速（傅汝德数）下的低速行船阻力，并与理论公式对比分析。仿真测试结果表明：在实际海况数据下，CFD数值模拟阻力与理论ITTC公式计算的阻力误差在2%以内且发展趋势一致。本文的研究为采用CFD研究行船阻力奠定基础。     

一种基于动态分析的突变和异常波动预警方法

针对模拟量的突变和异常波动预警,给出一种基于动态分析的、可以应用于各种模拟量的统一预警方法,该方法已被应用于CSM-TH型集中监测程序和智能分析系统中,在多条线700余站现场运行的7年中,收到良好效果,得到用户认可。     

基于语义挖掘的快递运输货品风险评价研究

为提高快递运输的风险监测管控能力，降低因快递货品风险导致城市安全事件发生的可 能性，本文基于语义挖掘方法将快递运输货品描述转化为风险的量化表征，为快递运输风险评价 提供可量化的客观指标依据。基于网络大数据资源提供的法院判决书数据，将物品词条与判决 结果相关联，通过隐狄利克雷分布模型挖掘物品风险主题，结合模糊均值聚类方法，实现对快递 货品语义风险的量化表征与柔性划分。与传统方法中依赖检视人员查验既定违禁品清单后的主 观判断方法不同，本文充分挖掘网络文本数据中的可迁移知识，并应用于种类繁多的快递运输货 品，有效避免人工评价造成的漏检、错检情况。研究结果表明，本文方法具有较高的准确率与较 低的误报率，获得的风险评价值不再是0或1的是非判断，有利于开展多样化、针对性的风险预警 及应对措施。