A numerical study on the installation configuration design of compliant vertical access riser (CVAR) in deepwater

In oil and gas transportation, the compliant vertical access riser (CVAR) system conducts economic and operational advantages due to its special configuration. In this paper, the static performance of the CVAR is studied by an efficient numerical method. According to the unique configuration of the CVAR, the mathematical model is established based on minimum total potential energy principle. The equilibrium equations are discretized by finite difference method and then solved by Newton-Raphson technique. The accuracy of the numerical method is verified by OrcaFlex software. Detailed parametric analysis is carried out based on practical engineering requirements. The effects of buoyancy section's configuration including buoyancy factor, buoyancy section's length and buoyancy section's location, and external environmental factors including wellhead offset distance, water depth and current velocity on installation shape and mechanical properties of the CVAR are analyzed. The research shows that the presented numerical method has good applicability and flexibility for the early installation configuration design of marine risers which have no touchdown section but only one touchdown point and are equipped with multiple buoyancy blocks subjected to forces of different directions and magnitudes, such as CVARs.     

Analysis of naval warship blast and shock resistance technology system北大核心CSCD

舰船抗爆和抗冲击技术概念宏观,内涵广泛,对其认识理解、设计研究都需要技术体系的顶层划分和牵引。首先,基于武器攻击对舰船的爆炸毁伤类型,对舰船抗爆与抗冲击这两个概念进行划分;然后,基于舰船总体抗爆抗冲击设计技术需求,区分不同的研究对象及技术的基础理论,提出包含6大类型的舰船抗爆抗冲击技术体系的划分方案,即水上/水下防护结构设计、新型抗爆结构与毁伤分析、设备系统及人员抗冲击、舰船抗爆抗冲击试验验证及技术标准规范;最后,分别对舰船抗爆和抗冲击技术内涵进行详细阐述。所做研究可为我国舰船抗爆抗冲击技术体系的形成提供一个初步构想,供从事舰船抗爆抗冲击设计、研究及管理人员参考。     

面向刚度设计的 GFRP 和 VRB/GFRP 混合层合板应变能密度分布研究

针对 VRB/GFRP混合结构刚度优化设计复杂而耗时这一问题，利用有限元法分析了 GFRP铺层角度和铺层数量、VRB厚度分布形式对两种层合板刚度特性及各组分应变能密度分布的影响规律。研究结果表明，应变能密度越小能表征更好的刚度性能；抗弯与抗凹工况下，采用# （0/90） 铺层角度、增加 GFRP铺层数量以及 VRB采用 0.9-1.8-0.9 mm 的厚度分布形式时，VRB/GFRP层合板各组分的应变能密度分布更加均匀，从而获得更好的刚度性能。     

“超滤+反渗透”工艺在污水厂再生水处理中的应用

近年来，污水再生利用在行业内受到越来越广泛的关注。现阶段，我国很多污水处理厂设计时未考虑污水再生利用。以上海某污水处理厂为例，其在市政污水厂再生水设计时创新采用“超滤+反渗透”工艺，达到工业净水标准后回用，实现厂内自用水的自给自足，以期为同类型污水厂再生水设计提供可参考借鉴的解决方案。工程再生水设计规模5 000 m³/d，超滤膜采用孔径为0.02μm的中空纤维膜，设计膜通量不大于55 L/(m²·h)，设计回收率不小于90%；反渗透膜采用卷式膜组件，设计系统回收率不小于70%。工程第一部分投资为2 091.17万元，单位经营成本为1.33元/m³。     

Ultimate strength assessment of simply supported pitted platings: A new stochastic approach based on Monte Carlo simulation

The ultimate strength assessment of platings affected by random corrosion wastage is a key factor for the reliable design of new ships and the structural health monitoring of aged structures, as pitting corrosion wastage significantly affects the ultimate capacity of platings under compression. In this respect, significant efforts have been undertaken in the last decade to assess the ultimate strength drop-off of pitted platings under compression and several interpolating design formulas, based on a large number of FE simulations, have been developed. Nevertheless, current Rules and guidelines don't provide any explicit strength check criterion for pitted platings. Hence, the main aim of current research is the development of a new framework for the ultimate strength assessment of pitted platings, based on a stochastic approach and the endorsement of Monte Carlo simulation. A new formula, which allows evaluating the statistical properties of the plating ultimate strength in presence of random corrosion wastage, is developed. Subsequently, a benchmark study is carried out, to compare the new formula with the existing ones available in literature and a wide set of FE simulations, carried out by Ansys APDL. Current results are discussed, and the effectiveness of the new formula is verified.     

波纹钢板截面几何性质精确计算

为快捷、精确地计算波纹钢板截面几何性质，通过各截面几何性质的定义推导得出单位长度波纹钢板截面面积、惯性矩、截面模量、回转半径的精确计算公式，并将其编写为“波纹钢板截面几何性质计算器”程序。以两种波形为计算实例，将编写程序的计算结果与现有文献和CAD软件计算结果对比，结果表明：计算结果与CAD软件计算结果完全吻合，而现有文献中的计算结果均存在误差，为近似值。可见，推导的计算公式及编写的“波纹钢板截面几何性质计算器”程序可精确计算波纹钢板截面几何性质。