611000DWT木屑运输船总体设计开发

木屑运输船是专门运输散装木屑的船舶,在世界上保有量不多,以往基本是由日韩建造。概括介绍了一艘61000DWT木屑运输船总体开发设计,主要介绍了木屑船的总布置特点以及在新规范下燃油舱保护的要求。具体特点有高干舷、大舱容、尾部下沉式甲板、燃油舱的布置方法等。     

集装箱正面吊运机吊具摇摆控制系统的仿真分析

根据集装箱正面吊运机吊具平衡系统的工作特点和运动学要求,搭建其机械和液压模型,利用AMESim动态仿真软件对吊具装卸作业的运动过程进行仿真比较,优化系统相关参数,从而得到最佳方案。     

基于累积前景理论的城际列车分时定价研究

城际客流具有时段分布不均衡特点,表现为高峰时段一票难求而低峰时段客座率低。为均衡客流、提高城际高铁收益,选取客运通道内不同时段车次进行差别定价。考虑旅客选择行为的差异性和有限理性,采用潜在类别分析对旅客进行分类,选取票价和时段价值两个影响因素, 建立双参照点的旅客平行车次产品效用模型,以累积前景值刻画异质旅客对平行车次的出行效用。基于累积前景值构建以铁路企业收益最大,旅客广义出行费用最小的分时定价双层规划模型,设计基于灵敏度分析的启发式算法求解。最后以南宁-北海为例对高峰、非高峰时段平行列车进行实例分析,结果表明,本文提出的分时定价方法能提升收益约2.5%,且高峰、非高峰时段的客流更加均衡。     

Time-variant ultimate longitudinal strength of corroded bulk carriers

Many bulk carrier losses have been reported of late, and one of the possible causes of such casualties is thought to be the structural failure of aging hulls in rough weather. In aging ships, corrosion and fatigue cracks are the two most important factors affecting structural safety and integrity. This paper uses a set of the time-dependent corrosion wastage models for 23 different member locations/categories of bulk carriers previously developed by the authors, based on the available corrosion measurements for existing large bulk carrier structures. Differences due to the location and corrosion severity of every member type are taken into account. The nominal design corrosion values for the primary members are suggested based on the annualized corrosion rates obtained in the present study. The effect of time-variant corrosion wastage on the ultimate hull girder strength as well as the section moduli is studied. The criteria for repair and maintenance of heavily corroded structural members so as to keep the ultimate longitudinal strength at an acceptable level are discussed. Important insights and conclusions developed are summarized.     

Is the curb 80% full or 20% empty? Assessing the impacts of San Francisco’s parking pricing experiment

The city of San Francisco is undertaking a large-scale controlled parking pricing experiment. San Francisco has adopted a performance goal of 60–80% occupancy for its metered parking. The goal represents an heuristic performance measure intended to reduce double parking and cruising for parking, and improve the driver experience; it follows a wave of academic and policy literature that calls for adjusting on-street parking prices to achieve similar occupancy targets. In this paper, we evaluate the relationship between occupancy rules and metrics of direct policy interest, such as the probability of finding a parking space and the amount of cruising. We show how cruising and arrival rates can be simulated or estimated from hourly occupancy data. Further, we evaluate the impacts of the first two years of the San Francisco program, and conclude that rate changes have helped achieve the City’s occupancy goal and reduced cruising by 50%.     

微机及载波控制逆变CO_2焊机的应用前景

通过对载波控制技术在焊机上的应用的研究,集成微机控制技术、IGBT逆变焊机节能技术,研发新型高效节能的微机及载波控制逆变CO2焊机,其效率比传统的硅整流CO2焊机提高30%以上;比传统的IGBT逆变CO2焊机节电10%,效率达到95%.因此,它为耗能巨大的电焊作业提供了节能降耗重要途径.可见这种技术先进、功能强大、人机界面友好、性价比甚高的微机及载波控制的逆变CO2焊机必将成为船舶高效焊接重要的工艺装备.     

The impact of a congestion pricing exemption on the demand for new energy efficient vehicles in Stockholm

As governments seek to transition to more efficient vehicle fleets, one strategy has been to incentivize ‘green’ vehicle choice by exempting some of these vehicles from road user charges. As an example, to stimulate sales of energy efficient vehicles (EEVs) in Sweden, some of these automobiles were exempted from Stockholm’s congestion tax. In this paper the effect this policy had on the demand for new, privately-owned, exempt EEVs is assessed by first estimating a model of vehicle choice and then by applying this model to simulate vehicle alternative market shares under different policy scenarios. The database used to calibrate the model includes owner-specific demographics merged with vehicle registry data for all new private vehicles registered in Stockholm County during 2008. Characteristics of individuals with a higher propensity to purchase an exempt EEV were identified. The most significant factors included intra-cordon residency (positive), distance from home to the CBD (negative), and commuting across the cordon (positive). By calculating vehicle shares from the vehicle choice model and then comparing these estimates to a simulated scenario where the congestion tax exemption was inactive, the exemption was estimated to have substantially increased the share of newly purchased, private, exempt EEVs in Stockholm by 1.8% (±0.3%; 95% C.I.) to a total share of 18.8%. This amounts to an estimated 10.7% increase in private, exempt EEV purchases during 2008, i.e., 519 privately owned, exempt EEVs.     

Using the revenues from congestion pricing

The economic theory behind congestion pricing relies on using the revenues to help compensate highway users. But can practical methods of using revenues come close to achieving this compensation, and still have salient appeal to important political groups? This paper investigates the possibilities for designing a package of revenue uses that can achieve these twin goals. The suggested approach returns two-thirds of the revenues to travelers through travel allowances and tax reductions, and uses the rest to improve transportation throughout the area, including affected business centers. By replacing regressive sales and fuel taxes, this approach offsets the tendency of the prices alone to have a regressive distributional impact. By lowering taxes, funding new highways, improving transit, and upgrading business centers, the package provides inducements for support from several key interest groups. The potential amounts of money involved are discussed using nationwide data, and in more detail using a case study of ubiquitous facility pricing throughout the Los Angeles region. Illustrative calculations of the effects on various individuals confirm that such a package can create net benefits for a wide spectrum of people and interest groups.     

大口径特涂管高质量制造的生产工艺

在72 000 dwt成品油船货油管制造中,发生特涂管涂装层脱落的问题,本文就此进行了分析,并提出了解决措施。