Optimal design of electric vehicle public charging system in an urban network for Greenhouse Gas Emission and cost minimization

In this paper, we address the optimization problem of allocation of Electric Vehicle (EV) public fast charging stations over an urban grid network. The objective is to minimize Greenhouse Gas Emissions (GHG) under multiple constraints including a limited agency budget, accessibility of charging stations in every possible charging request and charging demands during peak hours. Additionally, we address bi-criteria problems to consider user costs as the second objective. A convex parsimonious model that depends on relatively few assumptions and input parameters is proposed and it is shown to be useful for obtaining conceptual insights for high-level planning. In a parametric study using a hypothetical urban network model generated based on realistic parameters, we show that GHG emissions decrease with agency budget, and that the reductions vary depending on multiple factors related to EV market and EV technologies. The optimal solutions found from the bi-criteria problems are shown to be close to the solution minimizing GHG emissions only, meaning that the emission minimizing policy can also minimize user costs.     

Heterogeneous hazard model of PEV users charging intervals: Analysis of four year charging transactions data

Public charging infrastructure represents a key success factor in the promotion of plug-in electric vehicles (PEV). Given that a large initial investment is required for the widespread adoption of PEV, many studies have addressed the location choice problem for charging infrastructure using a priori simple assumptions. Ideally, however, identifying optimal locations of charging stations necessitates an understanding of charging behavior. Limited market penetration of PEV makes it difficult to grasp any regularities in charging behavior. Using a Dutch data set about four-years of charging transactions, this study presents a detailed analysis of inter-charging times. Recognizing that PEV users may exhibit different charging behavior, this study estimates a latent class hazard duration model, which accommodates duration dependence, unobserved heterogeneity and the effects of time-varying covariates. PEV users are endogenously classified into regular and random users by treating charging regularity as a latent variable. The paper provides valuable insights into the dynamics of charging behavior at public charging stations, and which strategies can be successfully used to improve the performance of public charging infrastructure.     

基于小波和粒子群算法的HEV行驶状况辨识方法研究

针对混合动力汽车(HEV)行驶状况(道路坡度和整车载荷)变化难以有效识别,导致驱动系统控制策略不能有效满足驾驶员意图问题,以混联式HEV为研究对象,提出了基于小波滤波和粒子群算法的HEV行驶状况辨识方法。首先建立了汽车行驶状况辨识模型,采用最小二乘法确立了优化目标函数,其次研究了基于小波滤波和粒子群算法的HEV行驶状况辨识原理,最后进行了行驶状况粒子群智能算法辨识试验。在采集实车数据的基础上,对实车数据进行小波滤波,并运用行驶状况辨识方法对道路坡度和整车载荷进行了辨识,并对辨识结果进行小波滤波,结果表明,试验工况下整车载荷辨识的相对误差绝对平均值为2.71%,道路坡度辨识的相对误差绝对平均值为3.85%,验证了所提出方法的有效性。     

Flow Stress Model of Stainless Steel OCr13Ni5Mo at Elevated Temperature

For a more accurate forming calculation and numerical simulation of hydraulic turbine blade,experimental studies on the flow stress of stainless steel OCr13Ni5Mo were carried out upon Gleeble-1500 thermal simulator under different deformation conditions.The results then were analyzed and the effects of all influencing factors were summarized consequently.New mathematic models were conceived.Utilizing the software Matlab,regression coefficients were calculated by the least square method.The model has an eminent capability of curve-fitting performance with impact structure whose correlation coefficient is up to 0.908 0 and the cosine coefficient is 0.995 8.All mathematic models and process parameters can be used in engineering calculations or computer simulations.     

大城市中心区实施拥堵收费的影响评价研究

文章在分析大城市中心区拥堵收费实施条件与方式的基础上,定性分析实施拥堵收费对居民出行行为以及中心区动静态交通的影响,最后提出基于模糊评价理论的中心区拥堵收费影响评价模型.     

基于MLPG法的船舶结构无网格自适应分析技术

研究船舶结构无网格自适应分析方法。首先运用无网格局部Petrov-Galerkin法,采用最小二乘法和加权余量法来求解结构位移场量的逼近函数,并给出问题的控制方程和刚度方程的一般表达式;然后采用Delaunay三角化细分方案对方程进行自适应计算;最后对船舶实肋板和带裂纹板进行应力分析计算,并通过与有限元法的计算结果进行比较,验证文章提出方法的有效性。     

独柱墩-固定式防船撞装置波浪荷载研究

以跨海航道桥梁安全为背景,进行独柱墩及独柱墩-固定式防船撞装置结构波浪力研究。开展室内缩尺试验,验证并校准Fluent三维数值模型的准确性和有效性。利用最小二乘法分解墩柱水动力为Morison方程的形式,计算得到结构水动力系数。考虑波浪高度、波浪周期、防撞装置断面形状和大小等影响因素,计算并拟合出墩柱水动力系数与相关因素间的定量关系。研究结果表明：固定式防船撞装置的存在增大了墩柱表面所受波压强,但不改变其总体分布趋势。当防撞装置断面为矩形,且波浪高度较大时,装置对墩柱受力特性的影响最明显。墩柱结构所受水动力中惯性力占主导,且可用均匀分布的惯性力系数来代替实际分布,独柱墩-固定式防船撞装置结构上的惯性力系数可以达到2.1左右。     

基于分子动力学模拟的橡胶改性沥青在集料表面的扩散特征研究

橡胶改性沥青和集料之间的界面作用与沥青路面的耐久性、高温稳定性有着重要联系而现有研究对该界面作用的微观认知尚不够全面。基于分子动力学模拟,以Materials Studio软件为研究工具,构建由基质沥青、天然橡胶沥青、顺丁橡胶沥青、丁苯橡胶沥青（15%掺量）与集料的4种主要矿物组成（石英、方解石、钠长石、微斜长石）两两构成的界面模型,从分子尺度上探究不同沥青组分在4种矿物表面的扩散行为,分析得到不同橡胶类型对其扩散作用的影响规律。结果表明：轻质组分在各矿物表面的扩散作用强于重质组分,相对分子质量对沥青组分的扩散速率起到关键作用;在不同矿物表面,橡胶分子链的加入对于提升沥青各组分扩散系数多为积极作用,且不同类型橡胶作用规律有所不同。研究结果可为不同矿料类型制备适配的橡胶改性沥青提供参考依据。     

The role of volume-delay functions in forecasting and evaluating congestion charging schemes: the Stockholm case

This paper uses observations from before and during the Stockkholm congestion charging trial in order to validate and improve a transportation model for Stockholm. The model overestimates the impact of the charges on traffic volumes while at the same time it substantially underestimates the impact on travel times. These forecast errors lead to considerable underestimation of economic benefits which are dominated by travel time savings. The source of error lies in the static assignment that is used in the model. Making the volume-delay functions (VDFs) steeper only marginally improves the quality of forecast but strongly impacts the result of benefit calculations. We therefore conclude that the dynamic assignment is crucial for an informed decision on introducing measures aimed at relieving congestion. However, in the absence of such a calibrated dynamic model for a city, we recommend that at least a sensitivity analysis with respect to the slope of VDFs is performed.     

大指挥官PHEV充电系统安规测试与案例分析

随着电动汽车市场占有率逐渐增大,电动汽车安全一直是国家和企业关注的焦点。GB18384电动汽车安全要求,从储能系统、车辆操作安全和故障防护,以及人员触电防护3方面做了详细的要求。本文着重阐述非传导充电系统如何做安规测试以及案例分析。