车辆—轨道系统高中低频动力学模型的理论特征及其应用范围的研究

针对铁路在提速和高速发展中碰到的车辆—轨道系统的结构磨损加剧、关键部件疲劳破坏和噪声等问题,提出必须进行车辆—轨道系统高中低频范围的动力学模型研究。根据激扰的差异及其波长范围,针对车辆—轨道系统动力学在低频、中频和高频3个范围内存在问题的性质,建立符合研究要求的车辆模型、轨道模型和轮轨接触模型,并采用合理的数学方法求解。认为以车辆—轨道系统的频率特征为基础,进行完整的车辆—轨道系统动力学研究,可以有效研究车辆—轨道系统的短时动力学和长期行为之间的关系。     

The shoaling of nutrient-enriched subsurface waters as a mechanism to sustain primary productivity off Central Baja California during El Niño winters

Using CalCOFI data for coastal shallow stations (above 100 m depth), higher than expected nitrate concentrations were detected in near-surface high-temperature waters off of Central Baja California during some El Niño winters. Though recent data are not available for Central Baja California, past El Niño data, though limited, showed nitrate concentrations above 16 μM at temperatures above 16 °C, and nitrate concentrations between 1 and 2 μM at 19 °C, while the previously established relationship of temperature and nitrate for California Current waters predicts nitrate depletion above 14 or 15 °C. The anomalous, high temperature–high nitrate enrichment events documented in Central Baja California were detected as shallow as 9 m and as deep as 73 m, were associated with low-oxygen (between 2 and 4 ml/l) and high-salinity (between 33.8 and 34.3 psu) waters, and occurred during the winter months of an El Niño year. Using recent data for San Diego, CA, similar but weaker enrichment events were detected for the El Niño winter of 1997–1998. The periodic shoaling of a subsurface subtropical water mass of high temperature, high salinity, low oxygen and high nutrients during some El Niño winters is proposed to cause periodic enrichment and to maintain productivity during warming events in this area. Enrichment events were not detected off Ensenada, in Northern Baja California, possibly due to the amplification of the onshore flow during El Niño there, or due to the Ensenada front. The proposed mechanism of periodic enrichment of nutrient-depleted surface waters during some El Niño winters by subsurface waters from the California Undercurrent may explain the following: (1) survival of giant kelp forests at their southern limit in Central Baja California documented during past El Niño events in warm waters, (2) the rapid recovery and high carrying capacity of giant kelp documented after the mass disappearance during El Niño 1997–1998, and (3) the increase in the extent of mesotrophic chlorophyll detected in the area during the 1997–1998 and 1982–1983 El Niño events.     

减振器安装刚度对径向转向架机车横向动力学性能的影响

首先通过仿真软件SIMPACK建立了一种2C0径向转向架机车模型,在该模型中,分别考虑了一系抗摇头减振器、二系横向减振器和二系抗蛇行减振器的端部安装刚度对机车横向动力学性能的影响。其中主要分析了上述3种减振器的端部安装刚度对机车横向平稳性、抗蛇行运动稳定性和机车的曲线通过性能的影响,并提出了相应的建议。     

气泡动力学数值模型的稳定性研究

基于势流假设,建立气泡动力学数值模型,并开发计算程序.系统地分析了不同模型、不同单元类型的计算精度,以及网格划分、时间步等因素对计算结果的影响,验证了本文数值模型的收敛性,并在计算过程中分析了动能、势能及总能量随时间的变化.为考核文中建立的气泡动力学计算模型的有效性,分别将轴对称模型及三维模型与Rayleigh-Plesset气泡模型的精确解及实验数据、实验照片进行了对比分析,分析表明,计算结果与Rayleigh-Plesset模型及实验数据吻合很好,表明文中建立的计算模型是可行的、有效的.并分析了气泡在重力场中的运动特性.     

Prediction of fatigue life and estimation of its reliability on the parts of an air suspension system

Air suspension systems have been implemented in various commercial vehicles, such as buses and special purpose trucks, because of the comfortable ride and easy height control. An evaluation of the durability of vehicle parts has been required for service life and safety starting in the early stages of design. The cyclic load applied to the vehicle can cause fatigue failure of parts, such as the suspension frame. This paper presents a method to predict the fatigue life of the suspension frame at the design stage of the air suspension system used in a heavy-duty vehicle. To estimate the fatigue life using the SN method, the Dynamic Stress Time History (DSTH) is necessary for the part of interest. DSTH can be obtained from the results of the flexible body dynamic analysis using the Belgian road simulation and the Modal Stress Recovery (MSR) method. Furthermore, the reliability of the predicted fatigue life can be evaluated by considering the variations in material properties. The probability and distribution of the expected life cycle can be obtained using experimental design with a minimum number of simulations. The advantage of using statistical methods to evaluate the life cycle is the ability to predict replacement time and the probability of failure of mass-produced parts. This paper proposes a rapid and simple method that can be effectively applied to the design of vehicle parts.     

Links between subjective and objective evaluations regarding the steering character of automobiles

This work presents an experiment on the relationships between subjective and objective evaluations of vehicle handling. Ten cars were examined objectively in several open-loop driving dynamics manoeuvres and subjectively by test persons in typical traffic situations. Results are extracted from a stationary test (the Slowly Increasing Steer Test), and a dynamical test (the Frequency Response Test). The subjective measurements are obtained from drivers on a rural road course via a questionnaire, which was developed to separately investigate the quantity level perception, the so-called “Niveau”, and the more qualitative “Liking”. These subjective “measurements” are embedded into a two-channel definition of “Steering Comfort” as a genus for “Steering Discomfort” and “Character”. The article concentrates on developing a statistical method for the consideration of correlations amongst the subjective/objective data. In doing so, the variance in example subjective Niveau ratings can be significantly explained by several objective quantities. Indicators for co-domains of validated discomfort characteristics and hints for endeavouring character Liking ranges are detected.     

Optimized design for a MacPherson strut suspension with side load springs

Undesired lateral force inevitably exists in a MacPherson suspension system, which is liable to damper rod’s side wear and promotes the damper’s inner friction decreasing the ride performance from the suspension system. Substituting a new side load spring with curved centerline for the conventional coil spring has been proven able to solve these problems and Multi-body Dynamics combining with Finite Elements Analysis may be an efficient method in optimizing its design. Therefore, taking a passenger car as example, a detailed multi-body dynamics model for the suspension system is built to simulate forces exerted on the damper and the minimization of its lateral component is selected as the design target for the spring. When the structure optimization of the side load spring is performed using FEA software ANSYS, its vertical and lateral elastic characteristics, supported by test data, are analyzed. After importing FEA results back to the suspension system, the dynamics simulation can be performed to validate the optimization result.     

悬索管道桥结构参数对全桥动力特性的影响研究

大跨度悬索管道桥桥面窄,宽跨比小,结构十分轻柔,结构参数的改变对其动力特性有较大的影响。以川气东送野山河悬索跨越工程为例,采用大型有限元分析软件ANSYS10.0分析了风缆预张力和风缆面与水平面夹角变化对该悬索管道桥动力特性的影响。研究表明,提高风缆预张力和选取适当的风缆与水平面的夹角能有效地提高全桥结构刚度。     

流态对江海直达船舶航行的影响

分析了江海直达船舶航行水域的流态特性,并对船舶操纵性能的影响进行了探讨,为保障船舶安全航行提出了相应的建议。     

岩溶富水区深埋水沟排水隧道注浆圈参数研究

为合理确定深埋水沟排水方式下隧道注浆圈特征参数,以某岩溶富水区隧道工程为依托,采用FLAC3D软件建立流固耦合计算模型,针对其注浆圈参数进行合理探讨,研究注浆圈厚度、注浆圈渗透性对隧道涌水量、衬砌水压力、结构安全性的影响规律。研究结果表明： 增加注浆圈厚度或降低注浆圈渗透性可降低衬砌水压、控制涌水量、保障结构安全,但并不代表实际工程中注浆参数需要追求最值,而应兼顾安全性和经济性,选取相对合理的注浆参数;结合模拟计算结果与同类工程案例,建议依托工程注浆圈厚度以5～6 m、渗透性比值以注浆前的1/50（渗透系数为2×10-6 cm/s）为宜,并应结合实际进行技术经济对比,合理确定现场注浆参数。