Numerical Simulation of Advanced Geological Forecasting Based on Multi- Source Seismic Interferometry北大核心CSCD

For existing advanced geological forecasting, the forecast distance is short and the test frequency is high, increasing test and construction risks. Since various methods have different requirements for the test environ-ment, preparation work can be tedious and result in a long construction time thereby affecting normal construction.A new advanced geological forecast technique based on multi-source seismic interferometry for tunnels is proposed.This technique uses the blast at one end of tunnel as a centrum and receives the signal at the other end of the tun-nel, therefore allowing advanced geological forecasting of the unexcavated tunnel part by relative processing and im-aging. A numerical simulation of this kind of geological forecasting using the finite difference method to simulate two kinds of unfavorable geological bodies (karst and a fault) predicted them accurately and verified the effective-ness and accuracy of this geological forecasting method. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Effect of Explosion in a Gas Pipeline Compartment of a Utility Tunnel on Neighboring Metro Tunnels北大核心CSCD

In this paper the numerical simulation analysis of the effect of explosion in the gas pipeline compartment of a utility tunnel on neighboring metro tunnels was conducted using the software AUTODYN. The results show that the TNT equivalent in a fireproof partition with length of 200 m is 41.6 kg when the gas concentration in the gas pipeline compartment reaches 10%; the blast wave has much effect on the crown and arch waist of the round metro tunnel and it’s necessary to take some protective measures in both areas; when the surrounding soil is sand, the utili- ty tunnel is above the round metro tunnel and their alignments are in the same direction, the greater the vertical spacing between the utility tunnel and the metro tunnel, the smaller the effect of the blast wave on the metro tunnel; when the vertical spacing is 7.2 m, the maximum dynamic tensile stress is 1.86 MPa (including the static stress value of 1 MPa in the tunnel segment) and it is slightly smaller than the designed tensile strength of metro tunnel (about 1.89 MPa). The maximum vibration velocity and the maximum displacement meet the structural stability require- ments, so it is suggested the vertical spacing between the utility tunnel and metro tunnel shall not be less than 7.2 m. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Analysis of Ground Response and Structure Stress Induced by PBA Method北大核心CSCD

The application of prefabricated tunnel technology has been become a new research field both in China and abroad. Based on the running tunnel between Yufuhe station and Wangfuzhuang station of Jinan rail transit line R1, a new prefabricated tunnel construction technology, the PBA method is presented. This paper makes a detailed discussion on section form, supporting scheme and construction process of the PBA method. In this study, 3D a new 3D numerical model for PBA method is presented by finite difference numerical simulation software Flac and the construction processes are modeled. The rule of ground surface settlement, ground deformation and structural stress caused by PBA method is studied in detail. Results show that the structure of PBA method can effectively control the deformation magnitude and scope. Stress concentration appears at the prefabricated connection parts and the reinforcement needs to check. The total assembled structure forms the load-bearing system after the completion of the lateral wall. The built-in depth of the precast pile and pile bottom grouting quality should to be ensured to control the displacement of the precast piles. The results of this study will be a useful reference for similar projects in the future. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Simulating ad-hoc demand-responsive transportation: a comparison of three approaches

Transport models are used to evaluate new infrastructure and public transport services, varied levels of demand, and new ideas for demand management. Exploring these proposals virtually is easier than implementation and testing in situ. However, existing models are based around traditional forms of transportation. As part of a feature analysis using a case study approach, three different simulation packages (a simple custom-developed package, traffic microsimulation, and agent-based simulation) are used to develop and demonstrate simulations of demand-responsive transportation (DRT) and analyze the advantages and disadvantages of each simulation approach for evaluating DRT. While the simulations display some relational replication (meaning they produce similar relational patterns with respect to certain variables), they do not show distributional replication (that is, the value of the results is not statistically similar), meaning that under- or over-estimation of predicted travel could occur. Recommendations for the application of each modeling approach are made.     

Direct formulation and algorithms for the probit-based stochastic user equilibrium traffic assignment problem

This paper proposes simple and direct formulation and algorithms for the probit-based stochastic user equilibrium traffic assignment problem. It is only necessary to account for random variables independent of link flows by performing a simple transformation of the perceived link travel time with a normal distribution. At every iteration of a Monte-Carlo simulation procedure, the values of the random variables are sampled based on their probability distributions, and then a regular deterministic user equilibrium assignment is carried out to produce link flows. The link flows produced at each iteration of the Monte-Carlo simulation are averaged to yield the final flow pattern. Two test networks demonstrate that the proposed algorithms and the traditional algorithm (the Method of Successive Averages) produce similar results and that the proposed algorithms can be extended to the computation of the case in which the random error term depends on measured travel time.     

利用SPS模拟川气东送管道压气站失效问题

为研究压气站失效与单台机组失效对输气管道的影响程度,采用SPS软件对压气站失效和单台机组失效进行了详细模拟。模拟结果显示:压气站失效与单台机组失效相比对管输系统影响较大;对于压气站失效,越靠近末站的压气站失效对管输系统影响越大;对于单台机组失效,越靠近首站的压缩机失效对管输系统影响越大。分析结果可为事故状态下的供气和抢修提供参考。     

基于插补原理的船体复杂曲面加热线布置方法

船体曲面成形技术是船舶加工过程中重要的环节。如何更好更快实现船体复杂曲面加工,一致以来备受国内外学者的关注。本文借鉴插补原理,对传统船体复杂曲面加热线布置进行了优化设计,得到了圆弧形板、s形板、帆形板和马鞍板的加热线。采用COMSOL Multiphysics多物理场仿真软件,分析四种加热线下钢板变形情况,并通过实验检验了插补形式下的船体曲面成形效果。结果表明：(1)插补算法得到的船体曲面加热线路程比传统加热线路程节约75%以上。(2)对有限元计算位移进行曲面拟合,得到的预测模型与实际船体曲面基本一致。(3)实验了四种曲面加热线,并将有限元预测位移与实验进行对比,二者误差在6%以内,有限元计算与实验结果基本吻合。该方法降低加工时间,提高加工效率。     

基于SPH方法的耙吸挖泥船艏喷过程数值仿真

艏喷是耙吸挖泥船作业的典型方式,泥浆混合物喷射轨迹和距离的分析一直是研究的热点。本文基于光滑粒子动力学（SPH）方法,在ABAQUS中建立典型耙吸挖泥船喷嘴管段模型,模拟泥浆喷射过程,并获得泥浆喷射轨迹及出口速度、泥浆散落面积等关键参数。经过与理论分析公式比较,粒子法数值模拟可以更好的描述喷射动态过程以及对管道的作用力,研究结果可以为耙吸挖泥船施工以及设计提供参考。     

小郭巨渔港工程防波堤平面布置方案

波浪是渔港建设中最重要的水动力因素,由于外海风浪作用强烈,影响港内渔船泊稳,需修建防波堤挡潮抗浪。从波浪角度研究防波堤平面布置,首先分析了舟山市六横岛小郭巨渔港工程的建设条件,确定防浪掩护控制标准,并提出防波堤直线形、折线形布置的8个平面布置方案。以满足渔船有效泊稳面积为准,采用MIKE21 BW模块计算在50 a一遇波浪与水位组合条件下堤后波高分布及防浪掩护效果,对8个方案进行研究,基于其中相对较优方案,进行了2个方案的优化。最终确定某渔港防波堤平面布置最优方案为:防波堤总长350 m、折堤夹角132°、直线段长122 m、折线段长228 m。     

汛期落成洲整治建筑物对船舶锚泊安全的影响

随着落成洲整治建筑物的建成,该区域内的流场将发生一定的变化,对船舶的航行及锚泊造成一定的影响,利用计算流体力学软件,数值模拟整治建筑物建成前后该区域内的流场变化情况。结果表明:整治建筑物的建成将有效地防止水流对落成洲的冲刷作用,航道水流更加稳定;但是,落成洲左汊下游镇江危险品锚地所在区域内的流速将明显提高,不利于锚泊安全,尤其是汛期。因此,应加强对该区域的监测和管理。