钢箱梁桥面环氧沥青铺装施工工艺

通过环氧沥青混凝土铺装施工技术,探讨在气候恶劣、建设条件复杂的桥区,进行大规模环氧沥青混凝土铺装的施工工艺改进情况。     

公路施工项目成本管理的探讨

对公路工程项目管理成本控制的原则进行分析。结合在滨德高速公路的施工项目,提出了成本控制措施。     

高速公路建设单位与沿线农村党组织联建的探索

文章从河池至都安高速公路创新建设单位与沿线农村党组织联建模式的角度出发,分析了创新高速公路建设单位与沿线农村党组织联建模式的动因、作用、意义及影响因素等,对高速公路建设单位与沿线农村党组织结对共建新模式和构建和谐的村企关系进行了探索。     

广西路网工程路线设计方法

文章结合广西路网工程建设背景、路网工程建设程序、路线设计步骤,介绍了以公路运行安全、新征用土地数量、工程造价、地形地物、方便施工等为原则控制路线的设计方法,同时针对当前路网工程路线设计中存在的主要问题,提出了相关的处理措施。     

Midas/Civil软件在大跨径桥梁悬臂施工中的应用

文章基于某跨越既有线大跨径预应力混凝土连续箱梁悬臂施工阶段划分情况,利用Midas/Civil程序软件,建立了三维有限元实体模型,对连续梁桥各施工阶段的主梁内力、应力及挠度进行了仿真模拟分析。结果表明,该有限元分析方法能精确模拟结构的实际受力情况。     

地铁建设工程的风险管理应用研究

地铁建设工程作为一项大型工程项目,往往存在着大量的不确定风险因素,因而风险管理在地铁工程中变得越来越重要.文章通过对国内外地铁工程事故经验的探讨,提出了地铁建设工程中风险管理的框架,包括风险辨识、分析和评估、应对以及风险防范措施等,以预防和减轻地铁工程风险,达到降低风险等级的目的.     

Compromising system and user interests in shelter location and evacuation planning

Traffic management during an evacuation and the decision of where to locate the shelters are of critical importance to the performance of an evacuation plan. From the evacuation management authority’s point of view, the desirable goal is to minimize the total evacuation time by computing a system optimum (SO). However, evacuees may not be willing to take long routes enforced on them by a SO solution; but they may consent to taking routes with lengths not longer than the shortest path to the nearest shelter site by more than a tolerable factor. We develop a model that optimally locates shelters and assigns evacuees to the nearest shelter sites by assigning them to shortest paths, shortest and nearest with a given degree of tolerance, so that the total evacuation time is minimized. As the travel time on a road segment is often modeled as a nonlinear function of the flow on the segment, the resulting model is a nonlinear mixed integer programming model. We develop a solution method that can handle practical size problems using second order cone programming techniques. Using our model, we investigate the importance of the number and locations of shelter sites and the trade-off between efficiency and fairness.     

Greenhouse gas emissions from road construction: An assessment of alternative staging approaches

The greenhouse gas (GHG) emissions associated with road construction activities are analyzed. The main focus of this analysis is on the vehicle emissions associated with alternative project staging approaches, specifically a full closure of the road during construction, versus an intermittent road closure. The analysis includes the direct and upstream emissions associated with materials, construction equipment, mobilization of resources to the work site, and maintenance activity associated with the project over its lifetime. The analysis is based on one case study of a road project in New Jersey. The assumptions underlying the staging analysis are based on hypothetical approaches. Results provide an assessment of the main sources of project related emissions and the ability to minimize total project emissions by minimizing traffic disruption. In the analysis with a full closure of the road, traffic disruption accounts for 26% of total emissions, while with an intermittent road closure, traffic disruption accounts for only 2% of total emissions. The other main sources are from materials and life-cycle maintenance. The analysis demonstrates the feasibility of minimizing project related GHG emissions during road construction activities.     

Design and evaluation of an integrated inventory and transportation system

This paper proposes the adoption of an integrated inventory and transportation system (IITS) to minimize the total costs of inventory and transportation. A non-linear programing is developed by analyzing transportation and inventory costs with one supplier and many retailers in the distribution environment. The paper compares the proposed model with the traditional approach in computing total costs with numerical data. The results indicate that the total costs can be optimized by adopting integrated programing rather than the traditional approach, along with achieving improved customer service levels. In particular, sensitivity analysis is applied to determine the performance of the IITS under various transportation costs, holding costs and shortage costs. It shows that the transportation cost per unit is most sensitive in the proposed model. In this situation, the IITS is more effective for cost saving when set-up cost, holding and shortage costs are high, but is less effective for situations involving high per-unit transportation costs.     

高地应力软岩隧道施工变形控制方法试验研究

为了研究高地应力软岩隧道施工变形控制方法,以兰渝铁路木寨岭隧道为例,通过对超前导洞法与三台阶法进行现场试验,分析了2种施工方法在高地应力软岩地层的变形控制效果,总结了三台阶法施工各阶段的围岩变形规律,主要结论为： 1）超前导洞法与三台阶法施工,隧道中台阶是变形控制的重点; 2）2种方法对高地应力软岩大变形总体控制效果相近,应结合其施工效率进行比选; 3）隧道开挖后应及早施作仰拱,这对控制隧道变形极为有利。