云中山隧道从横洞增辟工作面施工技术探析

云中山隧道进口段右线围岩变化频繁,开工后工程进度一直呈滞后状态.为此,工程单位决定从横洞增辟工作面的隧道开挖,其施工安排、出渣作业、通风、排水等均与普通隧道不尽相同,对此进行探析可供类似工程参考.     

喀斯特灌木护坡技术绿化法在石质坡面的应用

岩石边坡绿化是一门新兴的边缘学科，涉及面广。喀斯特（KST）灌木护坡技术绿化法在贵州高速公路运用尚属首次。鉴于此，结合都新高速公路边坡施工的喀斯特（KST）灌木护坡技术绿化，介绍了该方法的技术方案、护坡原理、施工中的消耗量和施工工艺。     

高速公路施工质量问题及控制措施分析

高速公路项目的施工质量关系到人们的出行安全。鉴于此，从参与方、材料、设备、环境等方面重点阐述了影响高速公路施工质量的因素，提出了相应的质量控制措施，可为高速公路的施工提供一些参考。     

二灰碎石基层的施工工艺及质量控制

近年来我国公路修筑技术有了很大提升,然而随着现行行业标准技术规范、质量标准的日益完善,对路面基层的施工工艺及质量控制也提出了较高的要求.目前在我国高等级公路的施工中,二灰碎石基层是普遍采用的一种结构形式.二灰碎石基层属于半刚性路面,因其具有良好的力学性能、整体性能以及承载力高、耐久性好、强度高、造价较低、材料易选、易于施工等优点被广泛应用.鉴于此,对二灰碎石基层施工中应注意的问题及其质量控制措施进行了探讨,以供参考.     

搅拌桩处理公路软弱地基施工工艺的探讨

以搅拌桩工艺处理软土地基,使其承压性能达到道路施工的必要条件。基于工程实践对其使用工艺进行技术优化,对于提高作业效率和降低工程成本是十分必要的。     

Corrosion rate measurements in steel sheet pile walls in a marine environment

Corrosion of steel structures in the marine environment is a major problem. The deterioration of this kind of structures is costly and difficult to predict both when designing new structures and when estimating the remaining service life time for existing structures. The aim of this investigation was to find indicative values for the corrosion rate of steel sheet piles on the Swedish west coast. Such corrosion rates (mm/year) can be used both when designing new structures by oversizing the steel thickness and when estimating the bearing capacity of existing sheet pile structures. Earlier investigations on the corrosion rates along the Swedish east coast – with salinity from about 0.2% to 0.8% – are still used today as guidelines for the corrosion rate of all steel structures in the Swedish maritime environment even though the salinity on the west coast can be as high as 3.0%.Steel sheet pile wharfs located in the port of Halmstad on the Swedish west coast were inspected by ultrasonic measurements. Three wharf structures with a total length of about 700 m were inspected. None of the inspected wharfs had or have had cathodic protection. The thickness measurements of the steel sheet pile structures were performed by divers.The age of the three inspected sheet pile structures ranged from 36 to 51 years. The dimensions of the original sheet pile sections are known. One of the quay structures is located along a river. The salinity at all wharfs varied from low values at the surface to approx. 2% at the bottom (also in the river outflow).The measured average corrosion rates were in the same order as the design values in the European code. However, the results indicate increased corrosion rates about 1 m below the mean water surface and at the level of the propellers from the ships berthing the most frequented of the inspected wharfs, 3–6 m below water surface.The tolerances of steel sheet thicknesses – usually in the order of ±6% – are often neglected when investigating the remaining thickness in steel sheet piles. A simple calculation model shows that the sheet pile must be almost 50 years of age before an accurate estimation on the corrosion rate can be made, considering the tolerances, if the true original sheet pile thickness is not known.     

高墩双线变四线道岔连续梁施工技术

金华至温州铁路扩能改造工程祯埠特大桥18#~22#墩之间设计1联4×32 m双线变四线道岔连续梁,梁面宽度由12.6 m渐变至20.72 m,箱内结构由单箱双室渐变为单箱三室。设计采用支架法施工,混凝土一次性浇筑、全梁张拉。通过对设计施工方案的优化,采用分段浇筑混凝土、全梁张拉的施工工艺,解决了高墩变截面荷载支架设计、预应力管道穿束、压浆密实度等难题,可为今后类似工程提供参考和借鉴。     

W钢带补强隧道衬砌缺陷施工技术

以新建铁路贵阳枢纽白云至龙里北联络线龙洞堡机场隧道施工为例,详细介绍了隧道二次衬砌补强缺陷整治的原则、材料要求、方法及措施、施工工艺,重点阐述了嵌W钢带配碳纤维布整治隧道二衬缺陷的方法及工艺,对地下工程病害及缺陷整治可起到借鉴作用,对今后类似地下工程的施工具有一定的参考价值。     

厦深铁路42号大号码道岔铺设施工工艺研究

42号大号码道岔对铺设精度及开通后的稳定性有了更高的要求,道岔的施工工艺也要求更加精准和细化。随着快速铁路网的逐步形成,大号码道岔会更频繁地使用于各条快速通道,探索一种更安全、更经济、更高效的施工工艺显得尤为重要,通过对道岔运输、装卸、铺设、焊接、精调等工序的深入研究和实践探索,并经过运营验证可行,由此提出了一套较为成熟的施工工艺,为大号码道岔铺设提供参考。     

高铁湿陷性黄土隧道地基处理浅析

根据湿陷性黄土隧道工程特点,结合宝兰客专客运专线王家岔湿陷性黄土隧道地基加固处理的工程实例,阐述了洞口和洞内两种施工工艺不同的水泥土挤密桩施工方案,分析了隧道内水泥土挤密桩施工对其它工序的干扰和对工期的影响,以及施工振动对初支结构和围岩稳定的危害,提出了有效的控制措施.