钢渣SMA路用性能试验研究

针对沥青混合料的路用性能特点,以钢渣作为原材料,设计并制备出钢渣SM A沥青混合料。并在室内试验过程中,首先研究了钢渣的材料特性,并采用普通车辙试验检验混合料的高温稳定性;在IN STRON材料试验机进行混合料的低温性能与疲劳性能试验;通过测定钢渣与沥青之间的接触角值以及浸水车辙试验来评价钢渣SM A混合料的水稳定性。试验结果表明,钢渣可以作为沥青面层优质集料使用,设计并制备出的沥青混合料具有良好的路用性能。     

软土地基上不同沥青路面结构的适应性研究

采用通用非线性有限元程序ABAQUS分析了淮盐高速公路试验路4种路面结构的工后沉降、不均匀沉降及层底拉应力。分析结果表明,在两层半刚性基层之间或刚性与半刚性基层之间设置级配碎石夹层的路面结构有较好的抵抗塑性变形的能力。有效减缓软土地基不均匀沉降对沥青面层造成的不利影响。由此,提出了不同于常规的半刚性基层沥青路面,具有应力消散能力,适应于软土地基的合理沥青路面结构。     

Modelling of wheels and rail discontinuities in dynamic wheel-rail contact analysis

A classification of wheel-rail contact is given. Difference is made between modelling of a running wheel with continuous single-point-contact, as is common practice in wheel-rail contact analysis, and a wheel with transient double- or multi-point-contact, which may occur for rail irregularities with curvatures larger than that of the wheel circumference. It is shown that application of the first model for these irregularities will strongly underestimate the contact forces as it does not describe occurring mechanisms correctly. Further, it is shown that in principle it is not possible to describe the second type of contact fully correct with a lumped wheel model. Both wheel models are formulated mathematically for some basic contact cases. Afterwards, results are applied to a linear track model. Analytical closed-form solutions are found in the frequency domain for arbitrary type of contact and numerically transformed to the time domain. Finally, the necessity is shown to avoid situations where transient multiple-point-contact may occur (like rail joints) in practice.     

喷撒颗粒的增粘机理研究

本文建立了向轮轨接触间喷撒颗粒时的摩擦模型，并将此摩擦模型应用于修正的轮轨粘着理论中，对喷撒颗粒的增粘机理进行了理论研究。从理论计算结果可以看出，向轮轨接触间喷撒颗粒的增粘效果是非常明显的，且增粘效果和轮轨的表面状态、颗粒的质量和进入轮轨接触面间的颗粒数量有关。     

弹性接触问题的位移-力法有限元解法研究

本文根据接触状态下的有限元基本方程,通过对定解条件、约束条件的分析应用,得出了仅与接触点有关的定解方程。 运用所编制的电算程序对某柴油机副连杆销及孔在最大载荷下的失圆变形进行了计算。通过采用空心及实心销两种简化模型计算得出了实际副连杆销的失圆变形范围。     

Experimental and numerical investigation on the derailment of a railway wheelset with solid axle

This paper presents the results of an experimental and numerical investigation on the derailment of a railway wheelset with solid axle. Tests were carried out under quasi-steady-state conditions, on a full-scale roller rig, and allowed to point out the effect of different parameters like the wheelset's angle of attack and the ratio between the vertical loads acting on the flanging and non-flanging wheels. On the basis of the test results, some existing derailment criteria are analysed in this paper and two new criteria are proposed. A model of wheel–rail contact is proposed for the mathematical modelling of the flange climb process, and numerical vs. experimental comparisons are used to obtain model validation.     

Normal and shear forces in the contact patch of a braked racing tyre. Part 1: results from a finite-element model

In this first part of a two-part article, a previously described and validated finite-element model of a racing-car tyre is developed further to yield detailed information on carcass deflections and contact pressure and shear stress distributions for a steady rolling, slipping, and cambered tyre. Variations in running conditions simulated include loads of 1500, 3000 and 4500 N, camber angles of 0° and ?3°, and longitudinal slips from 0% to?20%. Special attention is paid to heavy braking, in which context the aligning moment is of great interest. Results generated are in broad agreement with limited experimental results from the literature and they provide considerable insight into how the tyre deforms and how the contact stresses are distributed as functions of the running conditions. Generally, each rib of the tyre behaves differently from the others, especially when the wheel is cambered. The results form a basis for the development of a simpler physical tyre model, the purpose of which is to retain accuracy over the full operating range while demanding much less computational resource. The physical tyre model is the topic of the second part of the article.     

基于接触非线性的自翻车FEA实现

基于FEA(Finite Element Analysis)接触非线性,利用ANSYS软件实现了改进的新型自翻车车体非线性静强度分析,突破了国内外因自翻车模型庞大,结构复杂,接触边界条件繁多而带来的有限元非线性分析的困难.分析过程中充分考虑了自翻车体倾翻机构、八字面挡铁、活动卸货门等关键构件间特有的接触情况,更切实际地模拟了倾翻机构的工作状态,减小了仿真分析的误差.细述了自动倾翻车体结构建模过程中接触部件间的细节处理.通过接触非线性分析计算,得到了关键位置的应力分布情况,车体结构静强度与刚度均满足设计要求.     

城市轨道交通接触轨供电分段方式的探讨

接触轨按照供电系统的要求在正线和车辆段均设有电分段,本文通过对接触轨供电分段的常用设置方式中普遍存在的问题进行分析,并结合车辆运行和车辆段其他工种运营维护的实际需要提出合理设置接触轨供电分段的建议.     

复合材料螺栓连接结构数值模拟研究

在实际工程中,复合材料结构连接方式常采用机械连接形式(螺栓或铆钉)来连结复合材料构件和金属构件,而其中尤以螺栓连接更为常见.如何运用有限元软件模拟螺栓连接结构是仿真计算的关键.本文采用ANSYS软件,建立了复合材料螺栓连接结构的三维有限元模型,采用不同的边界处理方法对该结构进行数值模拟,得到复合材料螺栓孔处的载荷,并将数值计算结果与试验数据比较,探求出了该结构螺栓孔处载荷数值模拟方法.采用接触+耦合的边界处理方式不仅能较准确的模拟复合材料螺栓连接结构,而且计算时间远小于完全采用接触时的计算时间,大大提高了工作效率.