港区铺面设计中的集装箱角荷载

针对我国港区铺面中现行的集装箱角荷载设计方法的合理性问题,通过统计分析当前我国7个港口的集装箱质量分布规律,指出现行《港口工程荷载规范》与《港口道路与堆场设计规范》中关于集装箱角设计荷载规定的不合理之处:前者采用基于英国港口集装箱质量分布数据的折减系数法不符合我国情况,严重偏小;后者不能体现不同重要程度港口的设计需求差异性。进而,提出铺面结构设计时确定集装箱角荷载的建议。成果完善和改进了我国集装箱角荷载的设计方法,对港区铺面的建设和使用具有重要的价值和意义。     

高水水中转比例下的自动化集装箱码头堆场装卸工艺方案比较

近年来,集装箱自动化码头基本形成了典型的堆场装卸工艺方案,即堆场整体垂直码头布置,每个箱区配备2台自动化轨道式场桥(ARMG),分别负责装卸船和陆路外集卡装卸相关作业。但在高水水中转比例的码头,由于船侧装卸箱量高于陆路进出港箱量,该方案存在海陆侧ARMG作业不均衡而影响装卸船效率的缺点。通过分析该方案在高水水中转比例码头的不适应性,梳理国内外现有的解决方案,提出新的针对性方案。通过各方案的综合比较,提出解决思路,为类似自动化码头的设计提供参考。     

集装箱港区排队缓冲区交通设计研究

通过分析研究国内外集装箱港区排队缓冲区形式,提出了排队缓冲区分类方法以及功能组成结构,并在大型车辆外廓尺寸和转弯半径研究基础上,创新性地对减速换道功能区、临时等候功能区和排队检查功能区的交通设计内容及方法展开研究。     

大型集装箱船平行靠泊研究

大型集装箱船舶如何平行靠泊对于码头和设备安全十分重要.分析了船舶受力偏转的各种因素.介绍了风、流转船力矩的合理应用.提出了控制好平行靠泊的"三要素".最后介绍了大型集装箱船在风大浪急进靠泊的方法和注意事项.可作参考.     

A generic class of first order node models for dynamic macroscopic simulation of traffic flows

Node models for macroscopic simulation have attracted relatively little attention in the literature. Nevertheless, in dynamic network loading (DNL) models for congested road networks, node models are as important as the extensively studied link models. This paper provides an overview of macroscopic node models found in the literature, explaining both their contributions and shortcomings. A formulation defining a generic class of first order macroscopic node models is presented, satisfying a list of requirements necessary to produce node models with realistic, consistent results. Defining a specific node model instance of this class requires the specification of a supply constraint interaction rule and (optionally) node supply constraints. Following this theoretical discussion, specific macroscopic node model instances for unsignalized and signalized intersections are proposed. These models apply an oriented capacity proportional distribution of the available supply over the incoming links of a node. A computationally efficient algorithm to solve the node models exactly is included.     

Schedule-based transit assignment model with vehicle capacity and seat availability

In this paper, we propose a new schedule-based equilibrium transit assignment model that differentiates the discomfort level experienced by sitting and standing passengers. The notion of seat allocation has not been considered explicitly and analytically in previous schedule-based frameworks. The model assumes that passengers use strategies when traveling from their origin to their destination. When loading a vehicle, standing on-board passengers continuing to the next station have priority to get available seats and waiting passengers are loaded on a First-Come-First-Serve (FCFS) principle. The stimulus of a standing passenger to sit increases with his/her remaining journey length and time already spent on-board. When a vehicle is full, passengers unable to board must wait for the next vehicle to arrive. The equilibrium conditions can be stated as a variational inequality involving a vector-valued function of expected strategy costs. To find a solution, we adopt the method of successive averages (MSA) that generates strategies during each iteration by solving a dynamic program. Numerical results are also reported to show the effects of our model on the travel strategies and departure time choices of passengers.     

Frequency-based transit assignment considering seat capacities

This paper proposes a frequency-based assignment model that considers travellers probability of finding a seat in their perception of route cost and hence also their route choice. The model introduces a “fail-to-sit” probability at boarding points with travel costs based on the likelihood of travelling seated or standing. Priority rules are considered; in particular it is assumed that standing on-board passengers will occupy any available seats of alighting passengers before newly boarding passengers can fill any remaining seats. At the boarding point passengers are assumed to mingle, meaning that FIFO is not observed, as is the case for many crowded bus and metro stops, particularly in European countries. The route choice considers the common lines problem and an user equilibrium solution is sought through a Markov type network loading process and the method of successive averages. The model is first illustrated with a small example network before being applied to the inner zone of London’s underground network. The effect of different values passengers might attach to finding a seat are illustrated. Applications of the model for transit planning as well as for information provision at the journey planner stage are discussed.     

��������ʱ��ֲ��Ŀ������ģ�ͪ�

在城市轨道交通的线路网络形成、实行一票换乘并伴随投资主体多元化时,需要建立公平公正的票务清分机制,本文提出一个基于乘客旅行实际时间分布计算各路径上乘客比例的新方法.根据交通卡中的进出站的时间记录,计算出在一段时间内在一对出入站之间完成旅行的所有乘客的时间分布,以这个分布为依据计算在这段时间里各路径上的乘客比例.采用数值模拟的方法在一对有两条有效路径的出入站间产生乘客旅行时间的数据,然后根据这些数据进行客流比例计算.结果表明,即使两条路径的运营时间差异很小也能实现较准确的比例划分,这种动态计算客流分布的方法能更准确地反映实际客流分布.     

���ڽڵ���ҵ��������ļ�װ���ʽ����·���Ż�

在集装箱多式联运系统中,内陆运输方式和路径的选择,对集装箱门到门运输过程的运输效果产生很大的影响.为更合理地组织多式联运,本文在充分考虑集装箱内陆运输路径因素的同时,研究集装箱多式联运在运输方式转换过程中节点作业随机特征对运输方式和路径选择的影响.以总成本最小为目标,建立带有时间约束的混合整数规划模型,通过图形变换,将问题转化为节点作业带有随机特征和运输时间约束的最短路模型.通过实例验证并对结果进行分析,求得的路径在成本和时间方面较合理,具有可操作性,可以成为多式联运路径选择的决策参考.     

上海港集装箱货运量预测及拼箱作业节点建议

首先,分析了上海港港口集疏运现状,并采用灰色预测模型对上海港口未来年集装箱货运量进行预测;其次,结合上海港历年的进出口集装箱比例及上海港总体规划,预测未来年进出口集装箱量比例及未来年外高桥港区和洋山港的集装箱分担比;再次,针对未来年产生的集装箱货运需求,着重分析未来年集装箱货运对上海疏港道路(主要为北部过江隧道、东海大桥)的交通影响;最后,借鉴日本成田机场原木物流园区的货运组织方式,提出在沪宁和沪杭方向分别设置一个货运集散点,作为集装箱拆拼箱作业区的建议。