大跨径连续刚构桥的温度效应分析

以魏家洲特大桥为例,按照我国公路桥涵设计规范、英国BS5400规范、新西兰规范确定不同的计算模式,对大跨径连续刚构桥进行温度效应分析,得出：温度应力在大跨径连续刚构桥整个桥梁设计中占有很大的比重,且采用不同的温度梯度计算模式,所得到的梁内温度应力值相差较大,甚至出现异号的温度应力.     

二灰碎石组成设计与施工工艺的优化

从施工角度就改进和优化现有二灰碎石混合料级配组成设计和传统的施工工艺提出了几点建议,推荐集料级配范围和4阶段碾压模式.对二灰碎石基层施工具有积极的指导意义.     

Consumer preferences and willingness to pay for advanced vehicle technology options and fuel types

The automotive industry is witnessing a revolution with the advent of advanced vehicular technologies, smart vehicle options, and fuel alternatives. However, there is very limited research on consumer preferences for such advanced vehicular technologies. The deployment and penetration of advanced vehicular technologies in the marketplace, and planning for possible market adoption scenarios, calls for the collection and analysis of consumer preference data related to these emerging technologies. This study aims to address this need, offering a detailed analysis of consumer preference for alternative fuel types and technology options using data collected in stated choice experiments conducted on a sample of consumers from six metropolitan cities in South Korea. The results indicate that there is considerable heterogeneity in consumer preferences for various smart technology options such as wireless internet, vehicle connectivity, and voice command features, but relatively less heterogeneity in the preference for smart vehicle applications such as real-time traveler information on parking and traffic conditions.     

运梁河特大桥转体梁不平衡重称重试验分析

哈大客专运粮河特大桥跨既有线连续梁采用平转法施工,为确保转体顺利进行,转体前进行了T构不平衡重试验分析,文中介绍了一种转体构件不平衡重的测试方法和应用过程。结果表明,方法有效可行,可供同类工程借鉴。     

BIM技术在铁路预应力混凝土连续梁零号节段深化设计中的应用

近年来,部分铁路预应力混凝土连续梁支座附近出现浇筑不密实、蜂窝麻面等问题,一定程度上影响了连续梁质量。针对这一现状,结合BIM及C#语言技术,从深化设计平台的选择、精细化模型的构建以及BIM技术在深化设计中的应用开展研究。结果表明:(1)通过合理拆分并在空间上进行布尔组合,能够较快构建铁路连续梁零号节段BIM模型,满足深化设计条件;(2)基于BIM模型开展深化设计、生成2D图纸并统计工程数量,能够直观发现设计中的不足,一定程度上提升设计质量和效率。     

Policy packages for modal shift and CO2 reduction in Lille,France

This paper proposes different policy scenarios to cut CO₂ emissions caused by the urban mobility of passengers. More precisely, we compare the effects of the ‘direct tool’ of carbon tax, to a combination of ‘indirect tools’ – not originally aimed at reducing CO₂ (i.e. congestion charging, parking charges and a reduction in public transport travel time) in terms of CO₂ impacts through a change in the modal split. In our model, modal choices depend on individual characteristics, trip features (including the effects of policy tools), and land use at origin and destination zones. Personal “CO₂ emissions budgets” resulting from the trips observed in the metropolitan area of Lille (France) in 2006 are calculated and compared to the situation related to the different policy scenarios. We find that an increase of 50% in parking charges combined with a cordon toll of €1.20 and a 10% travel time decrease in public transport services (made after recycling toll-revenues) is the winning scenario. The combined effects of all the policy scenarios are superior to their separate effects.     

桥梁转体施工自闭合式合龙钢壳系统及施工技术研究

为进一步减小转体施工桥梁合龙施工时对既有运营线路的干扰,同时解决传统钢壳法中加劲肋板对合龙段施工的影响,以首座采用墩中转体的大树村龙川江三线大桥为依托,在传统钢壳法的基础上进行优化研究,自行研制、设计了一套自闭合式合龙钢壳系统并应用于实践,最终达到了安全、优质、快速、有序合龙的目的。实践结果表明,自闭合式合龙钢壳系统能够满足施工要求,且使用效果良好,达到了优化施工的目的,可为类似桥梁合龙施工提供参考。     

主动铰接盾构在连续小半径曲线中风化泥岩的掘进控制技术

武汉市轨道交通11号线东段工程光谷四路站—光谷五路站区间为"S"型连续曲线,最小平曲线半径为350 m,采用盾构法施工。通过对主动铰接盾构机掘进控制的难点分析,从土压力、千斤顶推力、千斤顶行程差、水平铰接角度和前盾水平趋向等方面采取有针对性的技术控制措施,使成型隧道轴线、管片错台控制在规范允许范围之内,成功解决了连续小半径曲线隧道盾构施工轴线难以控制、管片容易错台等大问题。     

高速公路连续箱梁桥独柱墩横向抗倾覆计算及安全性评估

连续梁桥由于结构刚度大、桥面变形小、动力性能好、变形曲线平顺、有利于高速行车等优点,是中小型桥梁的主要结构形式之一,得到了广泛的应用和发展。但是由于超载、偏载以及支座布置不合理等原因,近年来我国连续梁桥出现了多例整体失稳的事故,且事故大多出现在独柱墩连续梁桥上。针对最近发生的独柱墩桥梁倾覆事件,采用有限元程序Midas Civil对拟建的武深高速公路项目中连续箱梁桥独柱墩抗倾覆系数及独柱墩处箱梁支座转角进行验算,并与规范及《广东省高速公路独柱墩连续箱梁桥横向抗倾覆安全性评估验算指导意见》中要求的指标进行对比,对连续箱梁桥独柱墩横向抗倾覆安全性进行合理评估。     

土压平衡盾构施工中泡沫改良砾砂土的试验研究

为了解决土压平衡盾构在砾砂土地层掘进过程中,土体塑流性差、刀盘及螺旋输送机磨损严重和开挖面平衡不易保持等问题,通过自制泡沫发生器发泡,对砾砂土地层的泡沫改良技术进行室内试验研究,分析气液比、含水率和泡沫掺量对塑流性的影响和改良前后土样的渗透系数的变化规律,得出泡沫发生器气液比在30∶1~55∶1、含水率为5%~12.5%、泡沫掺量为20%~40%时,土体具有较好的塑流性,泡沫的"轴承效应"和泡沫剂中表面活性剂的亲水基团与水、砾砂土颗粒形成的氢键是塑流性提高的根本原因;使用泡沫剂改良砾砂土后,渗透系数大幅降低,掺泡沫后在280 min内渗透系数随时间变化较小,能达到10~(-5)cm/s,泡沫剂溶液中高分子化合物的联结和液桥力是土样具有堵水作用的原因。