基于临界面理论的焊接结构多轴疲劳寿命评估方法

目前多轴疲劳理论难以用于实际工程中焊接结构的疲劳寿命评估.文章将等效热点应力法与双参数临界面理论相结合,提出了一种能够应用于复杂焊接结构的多轴疲劳寿命评估方法.分别阐述了双参数临界面法的损伤参数、控制方程以及等效热点应力的定义,给出了焊接结构多轴疲劳寿命的评估过程,并应用有限元数值模拟验证了该方法的可行性.     

基于非饱和土有限元强度折减法的降雨入渗条件下高边坡施工稳定性分析

根据质量守恒定律推导了非饱和土渗流分析控制方程,采用全隐式向后差分格式求解此类有限元问题;将非饱和土有限元强度折减法应用于某高边坡工程的施工稳定性分析,得到了该边坡在各施工阶段下受到降雨入渗作用影响后的稳定安全系数及其失稳滑动面,并通过与不考虑降雨作用时的情况进行对比得出有益的结论;最后,针对该边坡的施工稳定性分析结果提出了加固建议。     

波浪动力对开敞淤泥质海岸深水航道边坡稳定性的影响

开敞淤泥质海岸深水航道边坡的稳定性关系到航道的基建及维护费用,是航道工程设计中最重要的问题之一。以连云港港徐圩港区10万吨级航道为研究对象,采用在连云港海域应用较为成熟的波浪数学模型推算的波要素成果,研究中浪、大浪对徐圩10万吨级航道边坡稳定性的影响,并利用边坡实测地形资料进行分析。结果表明,从波浪动力的角度来看,徐圩10万吨级航道设计边坡的坡度取值是合理的,本海域的波浪动力不会对航道边坡的稳定性造成不利影响。     

内河航道维护疏浚中岸坡稳定的控制办法

目前,维护疏浚已成为内河航道主要的养护方式之一。由于大多航道两岸的护岸建设年代久远,所以很难收集到完整的航道沿线护岸资料。为此,维护疏浚既要改善航道通航条件,又要保证航道沿线两岸岸坡稳定和建(构)筑物结构安全,成为维护疏浚设计和施工的重点和难点。结合上海市2010—2017年已实施的近百条内河航道维护疏浚项目的工程经验,总结维护疏浚过程中岸坡稳定控制办法。     

基于反分析法的均质路堑滑坡治理技术研究

反分析方法与计算机技术的结合使其功能越来越强,在实际工程中得到越来越多的应用与研究。采用反分析法确定边坡岩土体抗剪强度参数从而得出对滑坡治理的设计参数。基于简化Bishop法建立反分析极限平衡方程,并采用计算剖面多组单参数反演与统计比较分析相结合的方法,优化反算岩土抗剪强度参数值。该方法应用于某均值路堑滑坡治理工程并得以论证,表明了反分析法应用于滑坡治理的可行性与正确性。     

石方边坡控制爆破在公路路网工程中的运用

文章通过光面爆破与普通石方爆破的对比,总结石灰岩地区光面爆破各技术参数的选取和施工工艺的控制方法。     

盐穴天然气地下储气库运行过程的关键技术问题

在具有岩盐矿床地质构造的地区,将天然气储存在地下含盐岩层内,实现在短期内提供高容量的储备,是目前各国普遍采用的方法。结合国外相关技术文献及部分研究成果,对盐穴储库运行过程的关键技术问题,主要包括:如何在运行过程减少溶腔的收敛性,防止水化物的形成,溶腔建腔过程形成的冷带和残留盐水对运行过程的影响;垫层气技术、运行的稳定性及注采循环中应注意的问题。文中分别进行了较详细的论述,为今后国内盐穴储库的运行研究提供依据和技术支持。     

On Safety in Dismantling Temporary Strut of Super-large Tunnels with Double-layer Primary Support北大核心CSCD

More and more multiple-track tunnels and super-large section tunnels have been built, and disman- tling of temporary strut is a weak point of the whole structure during force transfer when the secondary lining is con- structed. It is significant to guarantee structure safety during dismantling of temporary strut. Little systematic re- search on safety in dismantling of temporary strut of the super-large section tunnel with double-layer primary support has been conducted, so the internal force and security of the two-layer primary support of the Xinkaotang tunnel were analyzed by a numerical analysis and site measurement, and it proves the effect of two-layer primary support on the safety during strut dismantling. The research results indicate that: (1) with constant support thickness and one-time longitudinal dismantling length, the safety factor of secondary primary support is larger than that of the first primary support, and the safety factor of the first primary support is larger than that of the single-layer primary support. Change range of safety factor for the first primary support is smaller than that of the single-layer primary support, and the safe factor for the single-layer primary support is smaller than that of the secondary primary support; (2) with the same support pattern, the safety factors increase firstly and then decrease with an increase of the onetime dismantling length. The calculated results of various cases show that the reasonable one-time dismantling length for this project is about 9 m. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

隧道长度对瞬变压力的影响

与阻塞比和车速不同,隧道长度对瞬变压力的影响呈现出明显的非单调性。这是在高速铁路隧道设计中必须考虑的问题。根据现场实测资料,研究分析了压力波的传播、反射和叠加规律,提出了单线隧道相应于压力变化不同情况的"最不利隧道长度"的计算图表及公式。     

Real time queue length estimation for signalized intersections using travel times from mobile sensors

We study how to estimate real time queue lengths at signalized intersections using intersection travel times collected from mobile traffic sensors. The estimation is based on the observation that critical pattern changes of intersection travel times or delays, such as the discontinuities (i.e., sudden and dramatic increases in travel times) and non-smoothness (i.e., changes of slopes of travel times), indicate signal timing or queue length changes. By detecting these critical points in intersection travel times or delays, the real time queue length can be re-constructed. We first introduce the concept of Queue Rear No-delay Arrival Time which is related to the non-smoothness of queuing delay patterns and queue length changes. We then show how measured intersection travel times from mobile sensors can be processed to generate sample vehicle queuing delays. Under the uniform arrival assumption, the queuing delays reduce linearly within a cycle. The delay pattern can be estimated by a linear fitting method using sample queuing delays. Queue Rear No-delay Arrival Time can then be obtained from the delay pattern, and be used to estimate the maximum and minimum queue lengths of a cycle, based on which the real-time queue length curve can also be constructed. The model and algorithm are tested in a field experiment and in simulation.