沥青混凝土路面预防性养护效益计算及参数

路面预养护效益分析是路面预养护技术的核心,是比选预养护方案和确定实施时机的前提。根据美国等路面预养护效益分析的经验,结合我国公路养护技术水平,对沥青混凝土路面预养护效益分析中的效益指标、效益计算基线和预养护时间范围展开了讨论;进而,提出我国现阶段沥青混凝土路面预养护分析中效益指标选用建议和它们计算下基线的参考值,以及预养护时间范围的控制指标和控制标准的建议值。     

高地应力千枚岩隧道二次衬砌施作时机研究

二次衬砌施作时机一直是高地应力软岩隧道工程设计与施工过程中面临的关键技术难题之一。为此,依托在建成都-兰州铁路典型千枚岩隧道工程,基于隧道变形长期监测结果,分析高地应力软岩隧道变形时程特点,考虑软岩隧道荷载特点,确定了二次衬砌施作时机原则;考虑隧道测量丢失变形,提出软岩隧道第1稳定阶段变形量确定方法;通过现场实测变形数据统计回归,基于一定保证率确定不同大变形等级和不同断面下的软岩隧道二次衬砌施作时机,并进行现场试验验证。研究结果表明:适当刚度的初期支护可以实现高地应力软岩隧道前期变形稳定,但无法保持围岩长期稳定,二次衬砌应该在初期支护变形达到第1稳定阶段后施作,既可以减少二次衬砌荷载,又可以控制围岩变形;采用指数函数拟合软岩隧道变形具有较好的相关性,但参数差异性较大,同时在确定隧道第1稳定阶段变形量时应考虑测量丢失变形;轻微、中等大变形段拱顶下沉变形速率小于0.1~0.2mm·d^-1,边墙收敛速率小于0.5mm·d^-1,严重、极严重大变形段拱顶下沉变形速率小于0.4mm·d^-1,边墙收敛小于0.6mm·d^-1,即可进行二次衬砌施作;轻微大变形段、中等大变形段和严重大变形段分别在隧道开挖45~55 d,55~60 d和80~90 d后达到二次衬砌施作标准。     

米勒循环结合可变涡轮增压优化柴油机性能的仿真与试验研究

在开发一款机车柴油机过程中,利用AVL BOOST软件对柴油机工作过程进行了仿真计算,计算了不同米勒强度和不同喷油正时条件下柴油机的性能参数。根据计算结果,排除了弱米勒的方案。针对强米勒和中米勒,开展了试验研究,通过调整喷油定时、增压压力设定、共轨喷射压力,进行了多方案试验研究,试验结果表明,强米勒方案虽然可以有效降低Nox排放,但是带来PM排放升高和涡轮前排气温度升高的问题,中米勒虽然降低Nox排放的效果弱于强米勒,但是能获得比较满意的PM排放,且涡轮前排气温度远低于强米勒,综合各方面性能参数的比较结果,在满足排放要求的前提下,中米勒为优选方案。     

考虑健康损失的路阻模型的构建

运用高斯烟羽模型计算机动车尾气排放量,然后利用支付意愿法定量分析健康损失,同时考虑延误和健康损失构建考虑健康损失的路阻模型。根据实例,分别使用Transcad和新的路阻模型计算出2个路阻,并进行交通分配。结果显示2次交通分配的路网流量不同,表明考虑健康损失的路阻模型影响了人们的出行选择,可有效解决主干路拥挤,增加次干路车流量,协调整个路网车流量均衡,提高路网交通效率。     

Assessment of factors associated with travel time reliability and prediction: an empirical analysis using probabilistic reasoning approach

Significant efforts have been made in modeling a travel time distribution and establishing measures of travel time reliability (TTR). However, the literature on evaluating the factors affecting TTR is not well established. Accordingly, this paper presents an empirical analysis to determine potential factors that are associated with TTR. This study mainly applies the Bayesian Networks model to assess the probabilistic association between road geometry, traffic data, and TTR. The results from this model reveal that land use characteristics, intersection factors, and posted speed limits are directly associated with TTR. Evaluating the strength of the association between TTR and the directly related variables, the log odds ratio analysis indicates that the land use factor has the highest impact (0.83) followed by the intersection factor (0.57). The findings from this study can provide valuable resources to planners and traffic operators in their decision-making to improve TTR with quantitative evidence.     

基于结果导向的绿色公路评价指标体系研究

本文在梳理绿色公路建设历程的基础上,结合绿色公路提出的时代背景、发展要求及目前评价指标体系存在的问题,借鉴目标管理法(MBO)突出结果导向,面向全寿命周期的三个阶段,从"资源节约"、"生态环保"、"低碳减排"、"智慧高效"等方面构建了包括4个一级指标、25个二级指标的绿色公路评价指标体系。     

快速公交系统站台停靠时间模型研究

快速公交系统停靠站台停车延误是影响快速公交运行车速的关键因素之一,因此构建快速公交系统站台停靠时间模型是提升快速公交服务水平的基础理论研究。本文选取盐城BRT-1号线的起始站、中途站、客流离散站等三类站点为研究对象,综合运用数理统计法与数据挖掘法,构建快速公交系统站台停靠时间模型,并对该模型的合理性进行了检验。研究表明:盐城市BRT-1号线三类站台的快速公交车辆停靠时间与上下车乘客人数呈线性关系,即快速公交车辆停靠时间与上下车乘客人数的检验参数R2均大于0.8。     

Using GPS-data to determine optimum electric vehicle ranges: A Michigan case study

Fuel-switching personal transportation from gasoline to electricity offers many advantages, including lower noise, zero local air pollution, and petroleum-independence. But alleviations of greenhouse gas (GHG) emissions are more nuanced, due to many factors, including the car’s battery range. We use GPS-based trip data to determine use type-specific, GHG-optimized ranges. The dataset comprises 412 cars and 384,869 individual trips in Ann Arbor, Michigan, USA. We use previously developed algorithms to determine driver types, such as using the car to commute or not. Calibrating an existing life cycle GHG model to a forecast, low-carbon grid for Ann Arbor, we find that the optimum range varies not only with the drive train architecture (plugin-hybrid versus battery-only) and charging technology (fast versus slow) but also with the driver type. Across the 108 scenarios we investigated, the range that yields lowest GHG varies from 65 km (55+ year old drivers, ultrafast charging, plugin-hybrid) to 158 km (16–34 year old drivers, overnight charging, battery-only). The optimum GHG reduction that electric cars offer – here conservatively measured versus gasoline-only hybrid cars – is fairly stable, between 29% (16–34 year old drivers, overnight charging, battery-only) and 46% (commuters, ultrafast charging, plugin-hybrid). The electrification of total distances is between 66% and 86%. However, if cars do not have the optimum range, these metrics drop substantially. We conclude that matching the range to drivers’ typical trip distances, charging technology, and drivetrain is a crucial pre-requisite for electric vehicles to achieve their highest potential to reduce GHG emissions in personal transportation.     

基于RFID电子车牌数据的公交行程时间预测方法

为了给公交优先信号配时系统提供足够的"思考"时间和准确的控制依据,基于重庆市RFID电子车牌数据提出了一种采用自适应渐消卡尔曼滤波和小波神经网络组合模型动态预测公交行程时间的方法。综合分析公交行程时间的动态和静态影响因素,选取的模型输入参量为标准车流量、路段车辆平均行程时间、平均车速离散性和前班次公交行程时间。利用RFID电子车牌系统采集重庆市鹅公岩大桥路段车辆行驶数据,选取3 000组实际运行数据完成公交行程时间预测模型的训练,另筛选50组数据验证模型的有效性和准确性。研究结果表明：组合模型可动态自适应预测公交行程时间,预测值平均相对误差为3.23%,绝对误差集中在8 s左右,明显优于2种单一模型和基于传统GPS数据的公交行程时间预测模型,可认为选择RFID电子车牌数据作为组合模型的输入,能够明显改善模型预测精度;组合模型预测值的残差分布更为集中、鲁棒性较好,泛化能力强。选择平均绝对误差值、均方根误差值和平均绝对百分比误差作为模型评价指标,结果进一步表明,组合模型的综合预测效果明显优于单一的自适应渐消卡尔曼滤波和小波神经网络。研究方案可为先进公交信息化系统提供良好的技术支撑。     

Identifying optimal data aggregation interval sizes for link and corridor travel time estimation and forecasting

With the recent increase in the deployment of ITS technologies in urban areas throughout the world, traffic management centers have the ability to obtain and archive large amounts of data on the traffic system. These data can be used to estimate current conditions and predict future conditions on the roadway network. A general solution methodology for identifying the optimal aggregation interval sizes for four scenarios is proposed in this article: (1) link travel time estimation, (2) corridor/route travel time estimation, (3) link travel time forecasting, and (4) corridor/route travel time forecasting. The methodology explicitly considers traffic dynamics and frequency of observations. A formulation based on mean square error (MSE) is developed for each of the scenarios and interpreted from a traffic flow perspective. The methodology for estimating the optimal aggregation size is based on (1) the tradeoff between the estimated mean square error of prediction and the variance of the predictor, (2) the differences between estimation and forecasting, and (3) the direct consideration of the correlation between link travel time for corridor/route estimation and forecasting. The proposed methods are demonstrated using travel time data from Houston, Texas, that were collected as part of the automatic vehicle identification (AVI) system of the Houston Transtar system. It was found that the optimal aggregation size is a function of the application and traffic condition.