高桩码头基桩动力损伤诊断方法研究综述

文章对传统的基桩检测的主要方法及其存在的局限性进行了综述,并对可能用于基桩损伤诊断的模态参数法、基于频响函数变化的损伤诊断法、模型修正法、神经网络法、遗传算法、小波分析法、残余力向量法进行探讨。最后对基桩损伤诊断领域的一些研究方向进行了展望。     

某人工岛机场成层土地基沉降分析

以某人工岛机场项目为依托,分别采用经典土力学理论和有限单元法分析了成层土地基施工期沉降及工后沉降,为确定地基处理方案提供依据。通过计算结果对比分析,表明采用化引当量层法计算成层土地基一维固结沉降能够满足工程精度要求。     

基于图像分析的机场跑道毁伤效果评估研究

该文利用图像处理和分析技术,研究基于最长跑道距离的机场跑道毁伤效果评估方法。按照机场跑道的毁伤特征,引入机场的最长跑道距离,通过比较机场的最长跑道距离和某型飞机最小起降窗口的长度来评估机场跑道的毁伤等级,并仿真实现,评估结果比较准确。     

船舶结构的搁浅数值仿真研究

文章用数值仿真法研究了船舶结构搁浅中的内部力学问题,分析了典型双层底结构的损伤变形、受力和能量耗散结果。研究表明,损伤变形集中于搁浅的区域,搁浅力学问题主要考虑局部的船体结构;肋板的存在显著地增加船底结构的抗搁浅能力,使礁石的垂向贯入量会略有减小;当纵桁远离搁浅区域时,它的吸能能力无法发挥,抗搁浅作用明显削弱。     

Fatigue damage estimation in non-linear systems using a combination of Monte Carlo simulation and the First Order Reliability Method

For non-linear systems the estimation of fatigue damage under stochastic loadings can be rather time-consuming. Usually Monte Carlo simulation (MCS) is applied, but the coefficient-of-variation (COV) can be large if only a small set of simulations can be done due to otherwise excessive CPU time. The reason is that the fatigue damage estimation is very sensitive to the largest values from the simulations. The paper suggests the additional use of the First Order Reliability Method (FORM) to get a better estimation of the tail in the distribution of the estimated fatigue damage and thereby reducing the COV. For a specific example dealing with stresses in a tendon in a tension leg platform the COV is thereby reduced by a factor of three.     

Analysis of structural crashworthiness of double-hull ships in collision and grounding

A conceptual design framework for collision and grounding analysis is proposed to evaluate the crashworthiness of double-hull structures. This work attempts to simplify the input parameters needed for the analysis, which can be considered as a step towards a design-oriented procedure against collision and grounding. Four typical collision and grounding scenarios are considered: (1) side structure struck by a bulbous bow, (2) side structure struck by a straight bow, (3) bottom raking, (4) bottom stranding. The analyses of these scenarios are based on statistical data of striking ship dimensions, velocities, collision angles and locations, as well as seabed shapes and sizes, grounding depth and location. The evaluation of the damage extent considers the 50- and 90-percentile values from the statistics of collision and grounding accidents. The external dynamics and internal mechanics are combined to analyse systematically the ship structural damage and energy absorption under accidental loadings.     

Fracture mechanics analysis for mooring chain links subjected to out-of-plane bending (OPB)

A fracture mechanics (FM) based investigation on the mechanism of out-of-plane bending (OPB) between mooring chain links and its effects on fatigue lives of mooring chain links are conducted. Four types of OPB problems that mooring chain links laying on the chain wheel, chain links passing over the bending shoe, chain links constraint provided by the chain hawse, and chain links constraint provided by the chain stopper are considered. Tension ranges of mooring lines are calculated based on the combined loading process induced by the motions of wave frequency (WF) and low frequency (LF). Initial cracks are assumed to propagate from surfaces of chain links and stress intensity factors are calculated in terms of stress ranges determined by a finite element (FE) analysis. The results show that fatigue lives of mooring chain links are decreased significantly due to OPB effects. In addition, the increase of the number of pockets of chain wheel mitigates OPB effects on fatigue lives of mooring chain links laying on the chain wheel, and the increase of the track diameter would reduce OPB effects on fatigue lives of mooring chain links passing over the bending shoe as well. However, for chain links constraint provided by the chain hawse, the diameter of mooring chain hawse has no significant effect on fatigue lives of the mooring chain links subject to OPB if without the abrupt change of the contact conditions between chain links and chain hawse. For mooring links constraint provided by chain stoppers considering the effect of proof loading test, fatigue lives of mooring chain links would drop significantly with the increase of interlink angles and friction coefficient.     

移动式损管训练舱堵漏水循环系统设计

文章通过3ds Max和AutoCAD软件设计出移动式损管训练舱堵漏水循环系统,在系统中完善了堵漏训练所需的配套设施,解决堵漏水的循环利用,使损管堵漏训练能满足海警官兵日常训练要求.     

Theoretical and numerical analysis of bending behavior of unbonded flexible risers

This paper presents theoretical and numerical study on bending properties of unbonded flexible risers. To capture nonlinearities in layer's sliding, the stress component due to slip-stick behavior is considered and energy conservation principle considering sliding-caused heat consumption is employed in the analytical model. Besides, a finite element model estimating mechanics of unbonded flexible risers' bending is proposed. In the finite element model, couplings between bending moment–curvature and axial stress as well as contact interaction among layers and tendons have been considered. The theoretical and numerical results were validated against the corresponding experimental data in literature and mutually compared in analyzing nonlinear bending behavior of flexible risers. Moreover, the impacts of axisymmetric loads on riser's bending behavior have been further investigated.     

水泥混凝土路面的病害防止与维修

分析水泥混凝土路面的病害,针对各种病害,提出维修方法。