双速搅拌工艺

根据传统二次搅拌理论,提出了混凝土双速搅拌工艺,介绍了双速搅拌工艺的原理及优点,并指出了该工艺的实现方案.该工艺的应用可降低生产成本,提高混凝土的强度和生产率.     

Consumer preferences and willingness to pay for advanced vehicle technology options and fuel types

The automotive industry is witnessing a revolution with the advent of advanced vehicular technologies, smart vehicle options, and fuel alternatives. However, there is very limited research on consumer preferences for such advanced vehicular technologies. The deployment and penetration of advanced vehicular technologies in the marketplace, and planning for possible market adoption scenarios, calls for the collection and analysis of consumer preference data related to these emerging technologies. This study aims to address this need, offering a detailed analysis of consumer preference for alternative fuel types and technology options using data collected in stated choice experiments conducted on a sample of consumers from six metropolitan cities in South Korea. The results indicate that there is considerable heterogeneity in consumer preferences for various smart technology options such as wireless internet, vehicle connectivity, and voice command features, but relatively less heterogeneity in the preference for smart vehicle applications such as real-time traveler information on parking and traffic conditions.     

Experimental evaluation of Heavy Duty Vehicle speed patterns in urban and port areas and estimation of their fuel consumption and exhaust emissions

Exhaust emissions and fuel consumption of Heavy Duty Vehicles (HDVs) in urban and port areas were evaluated through a dedicated investigation. The HDV fleet composition and traffic driving from highways to the maritime port of Genoa and crossing the city were analysed. Typical urban trips linking highway exits to port gates and HDV mission profiles within the port area were defined. A validation was performed through on-board instrumentation to record HDV instantaneous speeds in urban and port zones. A statistical procedure enabled the building-up of representative speed patterns. High contrasts and specific driving conditions were observed in the port area. Representative speed profiles were then used to simulate fuel consumption and emissions for HDVs, using the Passenger car and Heavy duty Emission Model (PHEM). Complementary estimations were derived from Copert and HBEFA methodologies, allowing the comparison of different calculation approaches and scales. Finally, PHEM was implemented to assess the performances of EGR or SCR systems for NO_X reduction in urban driving and at very low speeds.The method and results of the investigation are presented. Fuel consumption and pollutant emission estimation through different methodologies are discussed, as well as the necessity of characterizing very local driving conditions for appropriate assessment.     

高速铁路路基边坡纤维团粒喷播生态防护技术

针对高速铁路路基绿化工程高要求、少维护等特点,提出纤维团粒喷播技术,并详细阐述了其机理及特点.通过在京雄城际铁路路基边坡工程中的应用,归纳总结了该技术施工工艺流程:平整坡面→坡面覆土→铺设铁丝网→喷播基质→养护管理.喷播基质是利用喷播机械将性能优越的基质材料喷附至铁路路基坡面上的.工程应用表明该技术施工快,质量好,养护维修量小,经济性高.     

Mental models of driving and speed: biases,choices and reality

This paper provides a review of research performed by Svenson with colleagues and others work on mental models and their practical implications. Mental models describe how people perceive and think about the world including covariances and relationships between different variables, such as driving speed and time. Research on mental models has detected the time-saving bias [Svenson, O. (1970). A functional measurement approach to intuitive estimation as exemplified by estimated time savings. Journal of Experimental Psychology, 86, 204–210]. It means that drivers relatively overestimate the time that can be saved by increasing speed from an already high speed, for example, 90–130?km/h, and underestimate the time that can be saved by increasing speed from a low speed, for example, 30–45?km/h. In congruence with this finding, mean speed judgments and perceptions of mean speeds are also biased and higher speeds given too much weight and low speeds too little weight in comparison with objective reality. Replacing or adding a new speedometer in the car showing min per km eliminated or weakened the time-saving bias. Information about braking distances at different speeds did not improve overoptimistic judgments of braking capacity, but information about collision speed with an object suddenly appearing on the road did improve judgments of braking capacity. This is relevant to drivers, politicians and traffic regulators.     

Field tests of a dynamic green driving strategy based on inter-vehicle communication

This paper presents the design and results for field tests regarding the environmental benefits in stop-and-go traffic of an algorithmic green driving strategy based on inter-vehicle communication (IVC), which was proposed in Yang and Jin (2014). The green driving strategy dynamically calculates advisory speed limits for vehicles equipped with IVC devices so as to smooth their speed profiles and reduce their emissions and fuel consumption. For the field tests, we develop a smartphone-based IVC system, in which vehicles’ speeds and locations are collected by GPS and accelerometer sensors embedded in smartphones, and communications among vehicles are enabled by specially designed smartphone applications, a central server, and 4G cellular networks. Six field tests are carried out on an uninterrupted ring road under slow or fast stop-and-go traffic conditions. We compare the performances of three alternatives: no green driving, heuristic green driving, and the IVC-based algorithmic green driving. Results show that heuristic green driving has better smoothing and environmental effects than no green driving, but the IVC-based algorithmic green driving outperforms both. In the future, we are interested in field tests under more realistic traffic conditions.     

基于虚拟化云技术的路局中心地震预警监测系统方案及联动研究

通过研究铁路地震预警监测系统现状和建设趋势,从资源共享、重复性建设、地震联动触发信号系统停车、牵引供电系统断电等多角度分析存在的问题,结合实际需求,提出铁路局中心系统采用虚拟化云技术的建设思路,并提出地震预警监测系统通过路局中心系统与信号RBC、牵引供电中心接口的联动触发策略。文中论述了采用虚拟化云技术搭建的地震预警监测铁路局中心系统功能、系统构成、硬件配置,从而解决各条铁路接入路局中心增加大量服务器等所带来的资源浪费严重、重复性建设等问题,为建设项目节省投资;阐述了通过路局中心系统与信号RBC、牵引供电中心接口的联动触发方案,为安全提供保障的同时尽可能节省建设投资和维护成本,更好地为铁路安全保驾护航。     

高职高专中药炮制技术课程数字化教学资源的构建与运用——以郑州铁路职业技术学院中药专业为例

数字化信息化教学模式已经逐渐发展为高职高专教学的主流,为了适应数字化信息化教学模式的变化,郑州铁路职业技术学院依托信息化教学平台,通过构建中药炮制技术课程数字化资源,建设了微课、PPT、在线题库等数字资源,以线上线下相结合的混合教学模式,激发了学生学习的积极性和热情,丰富并提高了师生互动的方式和频率,达到了提高教学质量的目的。     

跃龙门隧道多功能钢拱架安装机快速施工配套技术

隧道施工机械化是我国隧道施工的发展方向。相较于开挖、衬砌机械化的快速发展,钢拱架安装机械化水平存在不足,长期以来较多采用人工作业,施工人员多、劳动强度大、施工效率及安装精度低,同时存在很大的安全隐患。本文通过跃龙门隧道机械化配置配套应用,分析了钢拱架安装机在机械化快速施工体系中的关键作用,并详细介绍了XZGMT411多功能钢拱架安装机相关参数、施工操作要点及注意事项。多功能钢拱架安装机的使用大幅提高了隧道施工效率及施工质量,缩短了施工工期。     

BIM技术在清华珠三角公建项目施工中的应用研究

随着科技的进步及项目管理水平的提高,BIM技术应运而生。本文以清华珠三角研究院粤港澳大湾区创新基地项目为依托,从应用目标、应用前准备工作、前期策划管理、技术管理、质量安全管理、物资设备管理、进度管理、经济成本管理等方面开展BIM技术在公建项目施工中的应用研究,结果表明:使用BIM技术,使项目管理走向精细化、全面化、高效化,并提高质量标准,增加安全保障,减少项目成本,提高项目利润率;同时与AI技术相结合,使BIM技术更加具有简便性,产出更大效益。