重载铁路四线高墩连续梁桥的设计

神瓦(神木—瓦塘)铁路冯家川车站大桥为重载铁路四线桥,主桥采用4线(65+100+65)m连续梁,最大墩高85 m.桥上线间距大,上下部结构横向尺寸较大,利用有限元分析软件BSAS,MIDAS/FEA对结构受力进行了计算分析.结果表明:在主梁梁高相同的情况下,采用单箱三室截面能更好地减小主应力,采用单箱双室截面增加腹板厚度对主应力的改善有限;多线桥桥墩横向尺寸较大,空心截面设置纵肋板能很好地提高高墩的局部稳定性;主梁及桥墩各项计算指标均满足规范要求.     

某款商用汽车电堆散热系统方案设计

从商用汽车电堆散热系统设计要求的实际角度出发设计系统原理图,从而进行计算匹配及选型零部件,对所选零部件进行仿真校核是否满足最初的设计要求,保证商用汽车电堆散热系统的正常工作。     

A signal decomposition method based on repeated extraction of maximum energy component for offshore structures

Contrary to most signal decomposition methods that usually decompose an original signal into a series of components simultaneously, a novel approach based on repeated extraction of Maximum Energy Component (MEC) is proposed. The approach starts from determination of the MEC referring to the estimated Power Spectral Density (PSD) function, and then represents the MEC by employing an exponential function to fit the original signal. By defining a stopping criterion based on two adjacent estimated PSDs, each MEC can be accurately extracted with an improved performance throughout the entire signal decomposition. To verify the proposed method, a single degree-of-freedom system subject to harmonic loads has been examined. Numerical results show that the analytical response can not only be decomposed into four MECs corresponding to the excitation and the system, respectively, but also provide an accurate estimation of natural frequency and damping ratio of the system. Meanwhile, by observing results from the Ensemble Empirical Mode Decomposition (EEMD), Variational Mode Decomposition (VMD) and Prony based on state-space model (Prony-SS), an improved decomposition accuracy has been achieved from the proposed approach. Furthermore, experimental data from the Norwegian Deepwater Programme and two sets of field-test data from one fixed offshore platform and an offshore wind turbine have been used to demonstrate the correctness of the developed signal decomposition method. It is noted that divergence in results by Prony-SS can be observed when a very large model order is used, while the proposed method provides the better decomposition and reconstruction of signals.     

福州东(樟林)车辆段工艺设计实践与创新

随着铁路建设的发展,福建省境内货车保有量大幅度增长,货车检修任务量增加迅速。樟林编组站位于福州枢纽,具备良好的扣车条件,在此新建1处货车车辆段将解决整个福建省货车的定期检修工作,而且能保障列车的运行安全,节约运输成本以及货车周转时间。福州东车辆段出入段线下穿既有温福铁路,有利于行车组织、运营安全。总图因地制宜全创新提出存车线(预检预修)与修车库贯通布置方案。充分梳理预检预修与架落车工艺,提出独立设置预检预修设施。论述抛丸除锈设备独立设置、转向架单臂悬挂检修流水线等修车库与联合车库创新设计,福州东(樟林)车辆段设计实现了创新理念和工程实际的协调统一。     

基于AHP-TOPSIS的山区低等级公路路面破损评价方法

以山区低等级公路路面为研究对象,依据不同种类路面的破损危害性不同,拟在公路路面评价中提出路面破损指数概念,对山区低等级公路路面破损程度进行综合评价。所用模型是利用层次分析法(AHP)对不同种类的路面损毁危害性进行赋权,并利用逼近理想解排序法(TOPSIS)计算山区低等级公路路面破损程度与最优情况的贴近度,进而将山区低等级公路路面破损情况转化成区间为[0,1]的路面破损指数,其中路面破损指数越大表示路面的破损程度越高。此模型方法简单,能够运用少量数据对山区低等级公路路面的破损程度进行定量评价,可为山区公路的养护工作提供更准确的数据参照。     

丰都丁庄裂口工业区滑坡的致滑概率研究

笔者通过对丰都丁庄裂口工业区滑坡的机理分析及工程实践经验,总结出了滑坡致滑的四大主要因子———内因、库位降落、暴雨和地震.提出了各因子致滑概率的度量指标及其致滑概率的标准值,建立了概率统计分析方法,并将此方法用于丰都丁庄裂口工业区滑坡的致滑概率分析,所得的结论与实际情况比较吻合.     

A new solution for two-bag air suspension system with leaf spring for heavy-duty vehicle

The design problem of a two-bag air suspension system for heavy-duty vehicles is formulated as a two-level (suspension system level and component level) optimization problem. At the suspension system level, optimal stiffness matrix of leaf spring, characteristics of damper and upper rod layout are determined by solving a multi-objective constrained optimization problem with response surface. At the component level, shape and thickness of the leaf spring are formed using cubic-spline curves to make the stiffness matrix as close to the target values cascaded from suspension system level as possible. Simulations using a vehicle model described by multi-body model and FEM of the novel leaf spring validate the suspension system thus derived.     

包头地区筑路材料的分布与选择

针对内蒙古包头地区筑路材料的分布特征，结合工程实践进行归纳分析，并提出相应的见解，可供设计时参考。     

旧水泥混凝土路面加铺沥青混凝土面层勘测设计

旧水泥混凝土路面加铺沥青混凝土面层，当没有路线设计资料时，需对旧有路线进行拟合，重新进行勘测设计，以获得与旧有路线一致的路线设计资料，为旧水泥混凝土路面加铺沥青混凝土面层提供设计依据。结合工程实践，介绍了拟合旧有路线时勘测设计的内容和方法。