内压载荷下X80管道裂纹应力分布规律研究

为了研究内压作用下管道裂纹应力场分布规律,以含有表面裂纹的X80管道为研究对象,对不同形状、不同方向、不同内压、不同尺寸的含裂纹管道进行仿真分析和实验验证。结果表明:裂纹尖端处应力远大于裂纹中心应力。裂纹形状对应力影响作用较小,随着裂纹方向与管道轴向夹角增大,裂纹尖端应力先增大后减小,随着管道内压、裂纹深度、裂纹长度的增大,裂纹尖端处应力随之线性增大。其中,裂纹长度对裂纹尖端应力的影响小于管道内压和裂纹深度。     

基于多维信息特征分析的驾驶人认知负荷研究

准确评估驾驶人认知负荷水平,对于深入研究驾驶人行为特性,改善驾驶安全性具有重要意义。现有的驾驶人认知负荷分类方法,大多基于心电、脑电等生理信息和车辆信息,由于特征选择上的单一性,导致驾驶人认知负荷分类模型的分类精度不高。设计基于跟驰场景的不同认知负荷N-back次任务试验,通过采集受试者的生理信号和车辆信号,结合NASA_TLX主观评分和机器学习算法,提出了基于多维信息特征融合的驾驶人认知负荷分类方法。研究表明：基于生理信息和车辆信息的多维信息特征认知负荷分类方法,其精度显著高于传统的基于生理信息的认知负荷分类方法,以多维信息特征为输入,随机森林法以其稳定性好、抗过拟合能力强的特点,表现出优异的分类效果,相比神经网络和支持向量机,具有最高的平均分类精度。     

STX1(2)型驮背多功能运输车超偏载检测标准

分析了STX₁₍₂)型驮背多功能运输车对既有超偏载检测方法和标准的适应性,提出了该车的超偏载检测方案,明确了公路货车或半挂车超偏载的检测方法及评判标准。     

Validation and application of nonlinear hydrodynamics from CFD in an engineering model of a semi-submersible floating wind turbine

Nonlinear hydrodynamics play a significant role in accurate prediction of the dynamic responses of floating wind turbines (FWTs), especially near the resonance frequencies. This study investigates the use of computational fluid dynamics (CFD) simulations to improve an engineering model (based on potential flow theory with Morison-type drag) by modifying the second-order difference-frequency quadratic transfer functions (QTFs) and frequency-dependent added mass and damping for a semi-submersible FWT. The results from the original and modified engineering models are compared to experimental data from decay tests and irregular wave tests. In general, the CFD results based on forced oscillation tests suggest increasing the frequency-depending added mass and damping at low frequencies compared to first order potential flow theory. The modified engineering model predicts natural periods close to the experimental results in decay tests (within 5%), and the underprediction of the damping is reduced compared to the original engineering model. The motions, mooring line tensions and tower-base loads in the low-frequency response to an irregular wave are underestimated using the original engineering model. The additional linear damping increases this underestimation, while the modified QTFs based on CFD simulations of a fixed floater in bichromatic waves result in larger difference-frequency wave loads. The combined modifications give improved agreement with experimental data in terms of damage equivalent loads for the mooring lines and tower base.     

Fitness-for-purpose assessment of cracked offshore wind turbine monopile

In this paper, the procedure for flaw acceptability assessment is examined through a case study of a semi-elliptical surface crack in an offshore monopile as it grows till it forms a through thickness crack. Using the procedure prescribed in an industrial standard (BS 7910), the fracture ratio, K_r is shown to increase monotonically with increasing crack depth. The load ratio, L_r, is initially insensitive to the crack depth. However, there is a rapid increase in L_r when the crack depth to thickness ratio exceeds 80%. L_r values obtained from detailed 3D FE limit analysis using elastic-perfectly-plastic material behaviour do not exhibit the asymptotic behaviour predicted by BS 7910 as the flaw transitions from deep crack to through-thickness crack. Furthermore, K_r predicted by BS 7910 is shown to be an over-estimation for the typical dimensions of offshore monopiles. The findings suggest that a structure with a deep flaw may be identified as unacceptable based on BS 7910 when it may still possess a non-trivial amount of structural residual life. This is a concern for monopiles where crack growth as a large flaw forms a significant part of the total life.     

舰载雷达稳定平台基座优化设计

本文对某舰载雷达稳定平台基座在船摇、风载和振动载荷作用下的受力情况进行分析和计算。运用有限元技术对原基座的载荷分布进行分析,同时对基座进行结构优化设计。通过对优化后基座的有限元分析计算表明其满足减重要求和船摇、风载和振动条件下的强度设计要求。     

基于UMAT的冰—结构相互作用数值仿真

基于ABAQUS 用户自定义子程序UMAT,采用已有的冰的弹性失效准则,针对冰与结构的相互作用进行数值模拟。首先, 通过简单算例验证本文开发的UMAT的正确性;然后, 采用开发的UMAT建立单个冰单元受刚性板挤压下的力学模型,得到力—位移曲线;最后, 通过建立圆柱与冰相互作用的仿真分析模型,探讨冰板厚度对结构反力的影响。研究结果表明,采用用户自定义程序UMAT使得模拟更为复杂的冰力学特性成为可能,可为以后开展大规模的冰—结构相互作用研究奠定基础。     

水力式升船机单井塔柱内对拉钢索优化布置

单井型塔柱结构极大改善了水力式升船机竖井水位同步性问题,但随着提升高度增大,竖井内水深越大,侧壁位移、弯矩过大等问题更加突出.以150米级单井塔柱为例,提出了竖井内布置对拉钢索的设想和简化布置方案.基于钢索拉力权重分配系数的优化方法,取得了钢索等应力的密度分布最优解,并离散转化为等效的等荷载布置方案,可在实际工程中应用...     

舱内爆炸冲击载荷特性实验研究

  目的  为研究典型舱内爆炸载荷对加筋板的毁伤特性,将舱内爆炸载荷分为初始爆炸冲击波载荷和准静态气压载荷,利用有限元分析软件LS-DYNA开展爆炸载荷下固支单向加筋板毁伤特性的数值模拟。  方法  主要模拟载荷冲量相等和载荷峰值相等时固支单向加筋板的变形特性,以及加筋板分别在初始爆炸冲击波载荷、准静态气压载荷及2种载荷联合作用下的毁伤特性,并分析上述载荷作用下加筋板的变形特点。  结果  结果表明：当作用在加筋板上的冲量相等、载荷作用时间小于0.05倍垂向一阶自振周期时,加筋板的最终挠度值处于最大值附近;当载荷峰值相同时,存在饱和冲量值,达到饱和冲量值以后,载荷作用时间不再影响加筋板的最终变形。  结论  在舱内爆炸载荷作用下,加筋板的最终变形不是2种载荷作用下的简单叠加,2种载荷的联合作用会增强毁伤效果。     

整治建筑物壅水及重力相似偏离影响的初步研究

简述整治建筑物的壅水及其机理,归纳出局部水头损失壅水的通用公式。将丁坝工程壅水区分为床面摩阻损失增大壅水和局部水头损失壅水2部分。在ΔFr>0的模型中,采用换算式ΔZp=ΔZm.hλ,定性地说是偏大的。可采用换算式Δhfp=Δhfmhλ。而丁、潜坝局部水头损失的壅水,则应采用hjp=Δhjmλu02。