2017年中国城市轨道交通运营线路统计与分析

截至2017年底,中国内地共有33座城市拥有城市轨道交通运营线路,总长4 706 km,运营线路161条,其中新增运营线路32条(段),新增运营里程874 km.统计运营线路的名称、里程等情况,并对统计口径和特别情况予以说明(本文中的统计数字没有包含由国家铁路部门管理的324 km市域快轨线路).给出2017年中国各城市的轨道交通运营线路数量和里程排序.并对我国轨道交通总体发展情况做了简要分析.北京以22条线位居运营线路数量首位,上海以676 km位居运营总里程首位.预测到2018年底,运营总里程将接近6 000 km,运营城市数量达到36座.     

单轨条轨道电路混电问题研究

在轨道交通建设过程中,50Hz单轨条轨道电路得到了广泛使用。讨论了单轨条轨道电路混电故障的原因以及解决方案。     

计轴在跨坐式轻轨中的应用方案与实现

以计轴在跨坐式轻轨中的首次运用,提出了室外传感器的检测方法及安装思路.     

城市轨道交通的旅行速度与列车拥挤度

从满足乘客出行需求的角度阐述城市轨道交通列车旅行速度、拥挤度两项指标的重要意义,并以当前我国典型的一线、二线城市轨道交通旅行速度、拥挤度的指标水平和提升过程为实例,分析这两项指标的计算方法、核心要素以及相互关系,从而提出新线开通运营前合理确定和开通运营后不断提升这两项核心指标的具体方法和措施:从优化司机站务人员站台作业标准流程、减少车辆开关门时间和同步延时时间、缩小列车区间运行时间余量等方面提高旅行速度;在开通初期可以通过增加上线列车数、中期可以通过提高旅行速度和折返效率的方法来降低列车拥挤度,而后期则需要研究采用大小交路套跑、上下行不对称运输、平行线路建设、新车增购等方式来从根本上降低列车拥挤度,不断提高乘客服务水平。     

城市轨道交通新线设备国产化评审及进口设备免税申报管理

由于新建城市轨道交通的企业对新线设备国产化管理经验的不足,难以在较短时间内组织好新线设备国产化申报及进口设备免税申报工作。介绍了相关政策背景并分析申报管理的重难点,提出明确企业部门责职、规范流程的建议。通过明晰申报流程,理顺各种工作界面间的关系,帮助企业获得相关进口设备免税,以及顺利通过设备国产化审核。     

Experimental and numerical investigation on the derailment of a railway wheelset with solid axle

This paper presents the results of an experimental and numerical investigation on the derailment of a railway wheelset with solid axle. Tests were carried out under quasi-steady-state conditions, on a full-scale roller rig, and allowed to point out the effect of different parameters like the wheelset's angle of attack and the ratio between the vertical loads acting on the flanging and non-flanging wheels. On the basis of the test results, some existing derailment criteria are analysed in this paper and two new criteria are proposed. A model of wheel–rail contact is proposed for the mathematical modelling of the flange climb process, and numerical vs. experimental comparisons are used to obtain model validation.     

Dynamic model for ride comfort evaluations of the rubber-tired light rail vehicle

The dynamic model was developed to evaluate vibration accelerations and ride comforts during the running of the Korean-standardised rubber-tired light rail vehicle. Ride comfort indexes were analysed and tested in accordance with UIC 513R by using the dynamic model and the actual vehicle in the test track. Based on the comparisons between analysis results and test results, the validity of the developed dynamic model was evaluated. It was verified whether or not the developed Korean-standardised rubber-tired light rail vehicle met the specified target specification on ride comfort. In addition, the influence of the wearing of guide wheels on ride comfort was estimated.     

Dynamics of railway wagons subjected to braking torques on defective tracks

It is well known that track defects cause profound effects to the dynamics of railway wagons; normally such problems are examined for cases of wagons running at a constant speed. Brake/traction torques affect the speed profile due to the wheel–rail contact characteristics but most of the wagon–track interaction models do not explicitly consider them in simulation. The authors have recently published a model for the dynamics of wagons subject to braking/traction torques on a perfect track by explicitly considering the pitch degree of freedom for wheelsets. The model is extended for cases of lateral and vertical track geometry defects and worn railhead and wheel profiles. This paper presents the results of the analyses carried out using the model extended to the dynamics of wagons containing less ideal wheel profiles running on tracks with geometry defects and worn rails.     

Indirect method for wheel–rail force measurement and derailment evaluation

Wheel set flange derailment criteria for railway vehicles are derived and the influence of wheel–rail contact parameters is studied. An indirect method for wheel–rail force measurement based on these derailment evaluation criteria is proposed. Laboratory tests for the calibration of strain–force devices on the bearing box are carried out to determine the relationship between the applied force and the measured strain. The simulation package, SIMPACK, is used to develop a passenger car model to generate wheel–rail forces and vibration signals. Different cases are considered in this model to provide an accurate validation of the identified wheel–rail forces. A feasibility test is conducted in the Beijing Loop test line using a passenger car equipped with a set of strain gauges on the wheel set. The comparison of the force time history applied to the instrumented wheel set and that obtained using the indirect method is presented.     

我国地铁接触轨技术发展综述与研发建议

介绍了接触轨系统的构成、技术特征和我国应用接触轨技术的概况。在直流1500V接触轨系统的“四大环节”研究中,建议重点对系统设计标准及产品制造标准进行研究;在系统设计标准的“四大关系”研究中,建议重点对1500V接触轨与人身安全防护的关系进行研究。在钢铝复合接触轨的国产化工作中,应重点解决好不锈钢带与铝型材的结合问题,以及不锈钢带的材质和外型表面平顺问题。