Generalised multi-axle vehicle handling

The familiar two-axle bicycle model and associated basic concepts of vehicle handling are reviewed and used to introduce minor changes in convention from the literature. The two-axle model is extended to a three-axle vehicle to illustrate the effectiveness of the notation combined with a simplifying mathematical identity found in the two-axle vehicle literature. A generalised model is then developed that produces dynamic equations of motion by inspection for a vehicle with an arbitrary number of steerable and non-steerable axles. Furthermore, the vehicle dynamic concepts of understeer and wheelbase are generalised and can be directly computed for various arbitrary vehicle configurations.     

Influence of polygonal wear of railway wheels on the wheel set axle stress

The coupled vehicle/track dynamic model with the flexible wheel set was developed to investigate the effects of polygonal wear on the dynamic stresses of the wheel set axle. In the model, the railway vehicle was modelled by the rigid multibody dynamics. The wheel set was established by the finite element method to analyse the high-frequency oscillation and dynamic stress of wheel set axle induced by the polygonal wear based on the modal stress recovery method. The slab track model was taken into account in which the rail was described by the Timoshenko beam and the three-dimensional solid finite element was employed to establish the concrete slab. Furthermore, the modal superposition method was adopted to calculate the dynamic response of the track. The wheel/rail normal forces and the tangent forces were, respectively, determined by the Hertz nonlinear contact theory and the Shen–Hedrick–Elkins model. Using the coupled vehicle/track dynamic model, the dynamic stresses of wheel set axle with consideration of the ideal polygonal wear and measured polygonal wear were investigated. The results show that the amplitude of wheel/rail normal forces and the dynamic stress of wheel set axle increase as the vehicle speeds rise. Moreover, the impact loads induced by the polygonal wear could excite the resonance of wheel set axle. In the resonance region, the amplitude of the dynamic stress for the wheel set axle would increase considerably comparing with the normal conditions.     

基于CRUISE的微型低速电动车主减速比研究

本文以某企业生产的微型低速电动车电驱动系统作为研究对象,按照产业标准及设计指标对电驱动系统关键部件进行参数匹配设计,利用CRUISE仿真软件分析了动力性及经济性;并运用ISIGHT与CRUISE联合仿真技术求解出该车型最佳减速比。通过样车实验表明,该方法求解微型低速电动车最佳主减速比准确可靠、效率高,可用于优化动力性与经济性。     

基于ABAQUS的某商用车后桥系统强度耐久性能仿真研究

文章基于有限元法,采用ABAQUS软件,对某商用车后桥系统进行了CAE强度分析,超载30％工况强度分析、扭转耐久、垂直弯曲耐久、转弯弯曲台架三工况CAE疲劳耐久分析,分析结果显示,后桥系统强度和耐久性能满足设计目标.     

电动客车轮边驱动电机的转矩分配控制策略研究

轮边驱动电机采用轮毂电机,实现四轮独立驱动,方便汽车动力学性能的控制.对于电动客车,轮边电机驱动以其轻量化、传递效率高等优势正在取代中央直驱的方式,成为现在研究的热点.这种驱动方式取消了离合器和变速器等,驱动电机安装在车轮旁边,结构空间和重量得以大幅度降低电.文章以四轮独立驱动的轮毂电机电动客车为研究对象,通过驱动转矩...     

北汽EV160纯电动汽车驱动系统异响故障诊断与排除

从故障现象原因入手,根据先外后内、先简后繁原则,对故障进行由外到内,先易到难的检查,然后依据厂家提供的数据参数,运用专用检测设备,对电机内部进行精确测量,通过数据对比分析,最终确定故障根源。     

电辅助驱动技术研究

文章提供一种第二轴采用传统驱动桥作为主驱动、第三轴采用电驱动桥作为辅助驱动的驱动力复合并联混合动力三轴车型方案,结合提升轴空气悬架控制技术,该方案在运营经济性方面比传统双后轴驱动车型更优.     

四跨一联预应力混凝土连续宽箱梁空间分析

结合上海市中环线虹梅路立交工程对主线四跨一联预应力混凝土连续宽箱梁进行空间分析,得到结构在荷载作用下的剪力滞效应分布规律、截面实际中性轴与平截面假定中性轴的比较、偏载下支座反力的分布规律、挑臂横向挠度、偏载下的偏载系数以及增设跨中横隔板与否对结构受力状态的影响等结论。     

应用线弹性疲劳损伤理论的沥青路面轴载换算

应用疲劳损伤力学基本原理,探讨了适用于沥青路面轴载换算的新方法,并对该方法拟合的公式与规范按弯沉等效推荐的当量轴载换算公式进行了比较。计算结果表明在进行沥青路面轴载换算时,采用不同的等效换算原理,将导致非标准轴载与标准轴载当量换算系数上的不同,前者较后者大。这种差异一方面直接影响沥青路面的结构厚度设计,对设计年限内累计当量标准轴载作用次数的低估,必然导致沥青路面早期破损现象的发生;另一方面揭示弯沉等效表征的是路面结构的瞬间刚度性质,代替不了路面结构的长期疲劳强度特性。     

车辆高速行驶安全的思考

分析了轮胎等汽车部件对行车安全的作用，论述了对ABS和车轮定位参数日常检测的必要性．介绍了电涡流中央制动器的制动原理和使用成本。