HD469单级减速驱动中桥总成失效分析

汽车实际运行中零件失效的表现往往较复杂,给失效分析工作带来很大的困难。本文结合HD469单级减速驱动中桥的失效,通过对拆开的桥的各个零件,尤其是出现异常零件的观察,运用系统推理分析思想,发现安装在差壳周圈上12.9级六角头螺栓掉头断裂是导致整个469单级桥总成发生严重失效的根本原因。     

A novel fuzzy logic correctional algorithm for traction control systems on uneven low-friction road conditions

The traction control system (TCS) might prevent excessive skid of the driving wheels so as to enhance the driving performance and direction stability of the vehicle. But if driven on an uneven low-friction road, the vehicle body often vibrates severely due to the drastic fluctuations of driving wheels, and then the vehicle comfort might be reduced greatly. The vibrations could be hardly removed with traditional drive-slip control logic of the TCS. In this paper, a novel fuzzy logic controller has been brought forward, in which the vibration signals of the driving wheels are adopted as new controlled variables, and then the engine torque and the active brake pressure might be coordinately re-adjusted besides the basic logic of a traditional TCS. In the proposed controller, an adjustable engine torque and pressure compensation loop are adopted to constrain the drastic vehicle vibration. Thus, the wheel driving slips and the vibration degrees might be adjusted synchronously and effectively. The simulation results and the real vehicle tests validated that the proposed algorithm is effective and adaptable for a complicated uneven low-friction road.     

The effects of wheelset driving system suspension parameters on the re-adhesion performance of locomotives

In this study, in order to examine the effects of a wheelset driving system suspension parameters on the re-adhesion performance of locomotives, the stick–slip vibration was analysed according to theoretical and simulation analysis. The decrease of the slip rate vibration amplitude improved the stability of the stick–slip vibration and the re-adhesion performance of locomotives. Increasing the longitudinal guide stiffness of the wheelset and the motor suspension stiffness were proposed as effective measures to improve the re-adhesion performance of locomotives. These results showed that the dynamic slip rate was inversely proportional to the series result of the square root of the longitudinal guide and motor suspension stiffness. The larger the motor suspension stiffness was, the smaller the required longitudinal guidance stiffness was at the same re-adhesion time once the wheel slip occurred, and vice versa. The simulation results proved that the re-adhesion time of the locomotive was approximately proportional to amplitude of the dynamic slip rate. When the stick–slip vibration occurred, the rotary and the longitudinal vibrations of the wheelset were coupled, which was confirmed by train's field tests.     

Suburban attitudes toward policies aimed at reducing solo driving

Policies that are aimed at discouraging commuters from solo driving have become a part of overall efforts to improve air quality and reduce traffic congestion. Since driving alone is the overwhelming choice of employed residents in US metropolitan areas, the political acceptability of proposed policy changes plays a role in their success. The 1992 Orange County (CA) Annual Survey asked employed solo drivers to rate their likelihood of changing from solo driving in response to various fees and incentives. Fewer say they would be very likely to stop solo driving if they were charged a parking fee at work (20%), a smog fee (17%) or a congestion fee (16%), than if their employers paid them a cash bonus for stopping solo driving (28%), or if more public transit (33%) or more carpools at work (35%) were available. Young and lower-status solo drivers are more likely than others to say they would stop driving alone if there were fees or cash bonuses. Current non-solo drivers tend to be young and low income, providing a validity check on the demographic predictors of stated preferences. The findings are discussed in light of recent policy changes in Southern California.     

盘式制动器性能试验台模拟机的研制

对盘式制动器工作原理及试验原理进行了研究，研制开发出了盘式制动器性能试验台模拟机。介绍了模拟机主机部分的设计，实现飞轮组的多片组合，设计出驱动制动系统和单片机测试系统，以保证系统的模拟精度。     

人机混驾环境下基于深度学习的车辆切入轨迹预测

为保证人机混驾环境下自动驾驶汽车的安全行驶,对周围车辆切入轨迹的预测至关重要.本文首先使用Savitzky-Golay滤波器对大规模采集的自然驾驶数据进行去噪处理,根据准则提取车辆切入片段,建立符合中国道路状况的车辆切入数据集.其次,发挥Bi-LSTM网络能充分利用上下文信息的优点和in-out快捷连接有效减少梯度消失...     

GPS-based optimization of plug-in hybrid electric vehicles’ power demands in a cold weather city

Using the WPG03 duty cycle developed from global positioning data collected in Winnipeg, Canada, real world energy demands and costs are modeled. Three types of plug-in hybrid electric vehicles, four temperatures and two charging scenarios are compared to a vehicle with an internal combustion engine. Cold temperatures are shown to greatly affect vehicle operation energy costs, which is an important consideration for cold weather cities such as Winnipeg. The largest energy cost savings are obtained for smaller-battery plug-in hybrids that had the opportunity to charge during the day.     

城市公交车行驶工况的构建

以城市公交车为研究对象,运用覆盖率、路段频度等方法,选取城市典型的公交运行线路,并进行大量的实验和实际运行数据的采集。利用主成分析和聚类分析构建行驶工况,研究表明,将众多反映道路交通特征的运动学片段特征值用主成分析法压缩成代表原始数据80%以上信息的3个或4个公因子的方法是可行的,接着用聚类分析提炼这些运动学片段。根据统计分析的概率随机选择并重组实际运动学片段,并以典型公交线路为研究对象进行分析,得出一个基于实际公交车速度的行驶工况,构建能反映典型公交线路交通状况的工况。     

高速公路立交入口区域行车风险评价模型

分析了高速公路立交入口区域车辆行车特征,提出了碰撞危险指数概念,考虑了碰撞可能性系数、碰撞车辆速度差、目标车道跟驰车辆在碰撞时的速度、加速度、前后车辆间距5个因素,将入口区域车辆可能发生的碰撞行为分为5种情形,研究了5种情形的发生条件,建立了相应的风险评价模型。针对不同的主线车辆运行车速、车头间距和匝道驶入车辆运行车速...