门座起重机起升机构节能技术的应用

起重机械起升机构重载下降时,重力势能会通过电机转变为电能,大部分起重机械将这部分电能通过电阻发热消耗,造成极大能量浪费。通过起升机构节能技术的应用,利用一套相对独立的系统将起重机工作时的势能进行回收、储存及循环利用,达到节约能源、降低使用成本的目的,起升机构节能效果超过50%。     

袋包装船机及其螺旋溜槽的研究与应用

针对沿海、沿江袋装货物的专业化装卸需要设计了一种袋包装船机,论述了其装卸工艺与结构型式,建立了刚性滑槽和柔性袋包的刚柔耦合动力学模型,仿真确定了袋包装船机的核心部件螺旋滑槽的几何参数,应用结果表明所设计的袋包装船机能够满足设计要求。     

一种基于Dijkstra算法的动态进路规划方法

为解决调车作业计划自动转化为联锁进路问题,介绍一种动态进路规划方法.把站场抽象为一个无向联通图,使用Dijkstra算法,求解出计划中的起点轨道到终点轨道的一条顺序包含无岔区段和道岔的最短路径.使用模糊匹配算法,对联锁表基本进路中的设备与最短路径中的设备,按照顺序以及设备实时状态进行匹配,获取到正确的进路组合,实现动态...     

基于轨迹数据的山区危险性弯道路段交通事故风险动态预测

针对山区双车道公路危险性弯道路段交通事故多发的现实问题,提出主动评估短时交通流状态下的交通事故风险,以降低交通事故发生率.采用无人机高空拍摄弯道路段交通流运行状态,利用计算机识别技术提取高精度的车辆轨迹和交通流数据,结合山区双车道公路弯道路段危险驾驶行为特征表征交通冲突,以距离碰撞时间为交通冲突量化指标,提出山区车道公...     

半柔性路面的设计与性能研究

对半柔性路面材料的设计方法进行探讨,通过室内试验测试半柔性路面的路用性能,并与普通沥青混合料AC-16进行对比,结果表明：半柔性材料具有优越的路用和力学性能。     

建筑节能激励政策的演化博弈分析

为有效实施建筑节能激励政策,运用演化博弈论的方法,对政府和房地产商群体之间相互作用时的策略选择行为进行分析,给出双方最优策略建议.考虑到博弈双方有限理性不均等及房地产商个体间理性不均等的事实,进一步对政府策略提出修正,并构建房地产商二次演化博弈模型.根据演化博弈分析的结果,认为:政府坚持建筑节能的高理性信念,运用激励政策在房地产商群体内形成二次博弈,淘汰"短视"者,培养"有远见"者,最终政府与房地产商群体达到双赢.     

一种半自动的基于图像建模系统

针对目前各种类型航海模拟器的虚拟建模效率较低与真实感较差等问题,设计与实现了一种基于多幅图像及少量用户交互恢复物体三维几何模型的系统.本系统采用稳定性好的改进Har-ris算子进行角点检测,基于角点空间特征及交叉相关实现角点的初始匹配;采用基于极线约束的角点匹配快速算法完成角点的精匹配,同时引入迭代和人工辅助修正的方法解决匹配算法的退化情况.在角点匹配结果基础上进行仿射重建,通过升级矩阵实现度量重建,在OpenGL环境下绘制出物体的三维模型框架.从原图像中抽取纹理并采用多视角图像融合的方法进行纹理映射,得到"照片级"真实感的三维模型.     

Site Earthquake Characteristics and Dynamic Parameter Test of Phase Ⅲ Qinshan Nuclear Power Engineering

The earthquake characteristics and geological structure of the site to sitting the Qinshan Nuclear Power Station are closely related. According to site investigation drilling, sampling, seismic sound logging wave test in single-hole and cross-hole, laboratory wave velocity test of intact rock, together with analysis of the site geological conditions, the seismic wave test results of the site between strata lithology and the geologic structure were studied. The relationships of seismic waves with the site lithology and the geologic structure were set up.The dynamic parameters of different grades of weathering profile were deduced. The results assist the seismic design of Phase Ⅲ Qinshan Nuclear Power Plant, China.     

Dynamic Simulation and Performance Investigation of No-Frost Refrigerator: Part Ⅱ System Simulation and Performance Analysis

The methodology for modeling no-frost refrigerator is described based on the component models de-veloped in Part I, and then, system simulation is applied to a BCD-235W refrigerator-freezer (RF). Experiments are carried out to study "pull-down" and steady-state performance of the RF, and to determine how the exper-iment and simulation temperature stack up against each other. Good match is found between simulated and measured results for the "pull-down" period. For the steady-state period, the simulation results are also found to agree well with experiment ones except for the temperature profiles of the refrigerator compartment (RC) and freezer compartment (FC). The average temperature and the energy consumption errors between measurement and simulation are less than 10%. Although the model can not reflect the non-uniform air temperature fields in the RC and FC, the variation range and periodicities of the temperature correlate well between the simulation and experiment. We conclude that such a model is valid for investigating the performance of no-frost refrigerator.     

A novel approach to design robust fault detection filter for networked control systems

In this paper, an approach for designing robust fault detection filter (RFDF) of networked control systems (NCSs) with unknown inputs is studied. The design aims at implementing the optimal trade-off between robustness of unknown inputs (including the item produced by networked-induced delay) and sensitivity of fault. The key design issue is to introduce an optimal fault detection filter based on NCSs with the control law compensation as the reference residual model of NCSs and to formulate the RFDF design as a model-matching problem. By applying H _∞ optimization technique, linear matrix inequality (LMI) approach is given to solve the model-matching problem. The validity of the proposed approach is shown by a numerical example.