舰用主汽轮机汽缸动刚度分析研究

为准确计算主汽轮机低压缸整体结构的动刚度,选取最能反映模型整体位移的低压缸底部中心处为单位激振力的加载点,考虑模型在单位激振力作用下的动态响应,并与在前后轴承座处加载单位激振力时的动态响应进行对比分析。研究表明,在低压缸底部中心处加载激振力能够较好地反映整体模型的振动特性,能较精确地得到整体模型的动刚度,是可行且有效的。     

背压对等径角挤压坯料变形的影响

采用有限元方法研究了背压对1100Al等径角挤压的影响．分析了坯料的变形、等效应变分布、最大主应力及变形载荷的变化．模拟结果表明,通过在出口通道施加背压,提高了坯料充填模具外侧拐角的能力,使得坯料横截面上等效应变分布更加均匀;坯料在变形过程中的最大主应力降低;但变形载荷随背压的增加不断增加．分析得出,施加适当的背压有助于提高坯料的变形均匀性,降低坯料表面的开裂倾向．     

基于遗传算法的企业间协同制造战略伙伴选择的方法

协同制造是一种能够实现快速响应市场的生产模式,该生产模式已经成为21世纪制造业发展的必然趋势．为了实现当前制造环境下制造资源共享与优化配置,描述了企业间协同制造的基本概念,提出了协同制造任务的分配和资源发现,分析了协同制造的策略与运行模式及战略伙伴的选择,比较了几种算法的优缺点,给出了应用实例,用遗传算法对事例进行了论证并对事例进行了优化,得出了可行性的结论．     

初始缺陷对耐压圆柱壳结构极限承载力的影响

为了考察初始缺陷、材料等因素对耐压圆柱壳结构极限承载力的影响,本文利用ANSYS有限元软件构造模型对耐压圆柱壳结构进行模拟．研究了缺陷幅值在一定范围内变化时,初始缺陷对耐压圆柱壳极限承载力的影响,并将有限元计算结果与理论计算结果进行比较,讨论了材料的改变对极限承载力的影响．初始缺陷幅值不会改变耐压圆柱壳结构的失稳模态,且对结构极限承载力的影响有限,但材料的改进对提高结构极限承载力的效果显著．     

三自由度平面并联机器人误差分析

为了研究各种误差对并联机器人输出产生的影响,以三自由度平面并联机器人为例,利用并联机器人的环路特性,采用机器人微分理论,建立了误差正向模型.通过M atlab编程和计算机仿真,得出输出误差与机器人结构尺寸变化、位置和姿态变化的关系图.为该类型机器人的设计、制造、装配提供了指导依据.     

海底输气管道泄漏风险定量分析

由于海底管道工作环境的恶劣性,其失效概率较高,一旦发生泄漏事故,后果严重．本文以某一海洋平台周围海底输气管道为背景,运用海洋工程领域风险评估软件NEPTUNE对不同破损情况下天然气泄漏扩散的情况进行了模拟,计算了泄漏气体点燃概率,预测了泄漏天然气爆炸事故的危害半径,其分析结果对海底管道油气泄漏扩散范围的预测及油气点燃概率计算方法的研究具有一定的参考作用．     

边坡稳定性分析的广义Bishop法

鉴于简化B ishop法作为一种简单实用且精度较高的极限平衡方法却仅限于分析圆弧破坏的缺陷,提出将B ishop法应用于任意滑裂面的广义方法.基于极限平衡理论和简化B ishop法的简化条件,推导其用于一般滑裂面破坏的边坡安全系数计算公式.通过实例分析考证比较该法的精度,并提出取矩中心的确定方法,以保证竖向力简化假设下的精度,为土坡稳定性分析提供了一种简单通用的方法.     

The relevance of international transport costs on food prices: Endogenous and exogenous effects

The paper addresses the problem of transport costs and their influence on food prices for South American imports. While transport does not seem to be in the focus of existing analyses, its impact on food prices might be underestimated and even closely linked to the development of commonly mentioned drivers of food prices. Since transport price formation is a function of demand and supply, drivers of food prices are also expected to impact on transport prices. The authors argue that a number of relevant factors that drive transport costs - and in consequence food prices - can be influenced by policy makers. Based on empirical analysis, the authors explain the functioning of the determinants of transport costs in the segment of international shipping, trying to describe their exogenous and endogenous components. These results are discussed in reference to policy development in the region.     

Numerical simulations of fatigue crack initiation and propagation based on re-tensile plastic zone generating load criterion for in-plane gusset welded joints

Many accidents are caused by fatigue in welded built-up steel structures, and so it is important to estimate the fatigue lives of such structures quantitatively for safety reasons. By assuming that fatigue cracks cannot grow without an accumulation of alternating tensile/compressional plastic strain, one of the authors identified an improved effective stress intensity factor range ΔK _RPG based on the re-tensile plastic zone generating (RPG) load, which represents the driving force for fatigue cracks, and suggested that ΔK _RPG should be used as the parameter to describe fatigue crack growth behavior. The “FLARP” numerical simulation code in which ΔK _RPG is implemented as the fatigue crack growth parameter, was developed in order to predict fatigue crack initiation and propagation behavior. In this paper, it is demonstrated that FLARP gives accurate estimates for fatigue life by comparing the estimated fatigue crack growth curves and S–N curves with the experimental results for in-plane gusset welded joints, which are used in many welded steel structures. Moreover, the effect of induced bending moment due to the linear misalignment in the out of plane direction on the fatigue strength of in-plane gusset welded joints is investigated through numerical simulations.     

生态系统分析方法与农业科技示范园规划

现代农业科技园区建设规划目标是实现经济、生态、社会效益的协调,园区是一个复合的人工生态系统。在规划过程中的一个核心环节就是进行生态系统分析,并在分析的基础上进行生态系统设计。文中讨论了农业园区生态系统分析的目标、步骤,并提出了科技园区的复合生态系统由4个子系统组成,分别是：安全永续的生态环境资源子系统、清洁循环的生态产业经济子系统、自然和谐生态人类住区子系统、先进高效的科技支持和管理决策子系统。