桥吊智能制动器改造测试

桥吊智能制动器研制成功后,为确保其性能,对其进行测试.介绍测试准备工作和测试做法.测试表明,智能型制动器能有效减小制动冲击,保护传动链,并能有效减小结构晃动.     

基于虚拟试验场的强化路面建模方法研究

虚拟试验场是依据某汽车试验场建立的,可用于在仿真环境下对车辆进行路试试验。虚拟试验场的路面建模需要保证具有实际路面特性,文章针对虚拟试验场建立中强化路面的建立问题进行研究,提出一种方法,可以准确的建立虚拟试验场的强化路面。利用双轨路面计测量强化路面的不平度,对测试数据进行分析处理,保证测量结果的准确性,应用试验场规则路面的详细尺寸信息建立模拟路面。对于规则强化路面,应用实际尺寸和技术规范等信息建立,对于不规则强化路面,利用实际测量的路面不平度,通过功率谱估计、路面等级分析、路面不平度数字化等建立模拟路面。通过相关性分析,保证所建立的模拟路面的准确性和可信性。     

基于复杂网络的机场群航线网络动态特征分析

随着航空运输和区域经济一体化的快速发展,我国已形成京津冀、长三角和珠三角三大典型机场群。文章以三大典型机场群为研究对象,构建基于滑动时间窗的航线网络拓扑结构,运用复杂网络理论分析机场群航线网络动态特征和同构性。研究结果表明,机场群航线网络具有无标度和小世界网络特征,并表现出显著的波峰和波谷动态性,并且长三角机场群的航班集中度分布明显高于其他两大机场群。文章首次从航线网络视角,运用Dice相似系数衡量了机场群内部各机场之间航线网络同构性程度。     

铁道车辆轴箱弹簧断裂故障对动力学性能的影响

车辆运行过程中,当轴箱弹簧突发断裂故障,会造成动力学状态和性能突变,一系悬挂刚度突然减小,暂时失去承载能力,会威胁车辆行车安全。结合整车的动力学仿真,建立了轴箱弹簧断裂过程的力学模型,对整个断裂过程进行仿真,模拟了轴箱弹簧突然断裂工况下车辆动力学性能变化,分析了轴箱弹簧断裂条件下车辆直线行车安全性以及曲线通过安全性。计算分析结果表明:轴箱弹簧突然断裂导致一系悬挂刚度剧变,引起轮轨垂向力先减小后增大,轮重减载率、脱轨系数等参数增大直至超限,但对轮轨横向力影响不大。     

中型低压大功率电机轴承温升测试及修理措施

文章主要讲述中型低压大功率电机轴承温度的测量方法和测试过程中轴承温升的基本规律。并对中型低压大功率电机轴承温度测试应注意的问题和温升的基本规律进行了简要分析。对电机轴承温升过高提出修理改进措施，从而使人们对中型低压大功率电机测试和使用过程中轴承温升控制有所参考和依据。     

混合下单模式下在线餐饮订单配送优化模型

针对在线餐饮订单量激增及订单到达非均匀分布导致的调度不合理与资源浪费等问题，提出顾客提前下单与动态实时下单相结合的下单模式，研究此模式下订单配送优化. 考虑在线餐饮订单配送优化具有的动态VRP和多回程VRP属性，以最小化配送成本为目标，建立带有软时间窗的整数规划模型. 设计基于插入算法和2-opt 邻域搜索的混合启发式算法求解模型. 通过算例，分析提前下单顾客比例、提前下单时长等因素的影响. 结果表明，单个因素的增加会降低配送成本，当两者同时增加，因系统达到饱和使配送成本不升反降，因此要调整措施使顾客下单情况与系统配送能力相适应.     

再生沥青混合料最佳拌和温度及压实温度研究

为了确定再生沥青混合料的最佳拌和温度和压实温度,首先通过SGC试验在不同温度下成型混合料试件,根据试件的体积参数确定再生混合料最佳压实温度,然后根据再生沥青在合适剪切速率下的黏温曲线确定再生沥青混合料的最佳拌和温度。试验结果证明:对于再生基质沥青混合料,试验确定的最佳压实温度及拌和温度接近由黏温曲线计算所得温度值;对于再生改性沥青混合料,其施工特性与新拌混合料有明显差异,由试验确定的最佳压实温度及拌和温度低于黏温曲线所得的温度,建议实际工程中确定再生改性沥青混合料压实温度及拌和温度时,可在再生沥青黏温曲线试验的基础上适当降低5～10℃。     

Influence of uneven rail irregularities on the dynamic response of the railway track using a three-dimensional model of the vehicle–track system

A mathematical model of the vehicle–track interaction is developed to investigate the coupled behaviour of vehicle–track system, in the presence of uneven irregularities at left/right rails. The railway vehicle is simplified as a 3D multi-rigid-body model, and the track is treated as the two parallel beams on a layered discrete support system. Besides the car-body, the bogies and the wheel sets, the sleepers are assumed to have roll degree of freedom, in order to simulate the in-plane rotation of the components. The wheel–rail interface is treated using a nonlinear Hertzian contact model, coupling the mathematical equations of the vehicle–track systems. The dynamic interaction of the entire system is numerically studied in time domain, employing Newmark's integration method. The track irregularity spectra of both the left/right rails are taken into account, as the inputs of dynamic excitations. The dynamic responses of the track system induced by such irregularities are obtained, particularly in terms of the vertical (bounce) and roll displacements. The numerical model of the present research is validated using several benchmark models reported in the literature, for both the smooth and unsmooth track conditions. Four sample profiles of the measured rail irregularities are considered as the case studies of excitation sources, examining their influences on the dynamic behaviour of the coupled system. The results of numerical simulations demonstrate that the motion of track system is significantly influenced by the presence of uneven irregularities in left/right rails. Dynamic response of the sleepers in the roll direction becomes more sensitive to the rail irregularities, as the unevenness severity of the parallel profiles (quantitative difference between left and right rail spectra) is increased. The severe geometric deformation of the track in the bounce–pitch–roll directions is mainly related to such profile unevenness (cross-level) in left/right rails.     

Virtual durability test rigs for automotive engineering

In recent years so-called ‘virtual test rigs’ have become more and more important in the development process of cars and trucks. Originally, the idea was to substitute expensive durability tests with computer simulation. Meanwhile, the focus has changed towards a more cooperative usage of numerical and laboratory rig simulation. For many safety critical issues laboratory tests remain indispensable. In early development stages, when no physical prototypes are available yet, numerical simulation is used to analyse and optimise the design. In this paper, we show how to build numerical simulation models of complex servo-hydraulic test systems and their test specimen using multi-body simulation for the mechanics in combination with simulation models for the hydraulics and controls. We illustrate this at two industrial application examples: a spindle-coupled passenger car suspension rig and a tyre-coupled full vehicle rig. We show how the simulation models are used to design and optimise better test rigs and to support the test rig operation by preparing the physical tests with new specimen, i.e. by performing numerical simulations including numerical drive file iteration before the physical tests start.     

京津城际与津秦客运专线互联互通探讨

针对津秦客运专线联调联试期间,不同型号的动车组运行跨线试验时发现天津站城际场与津秦场场联CTCS-2级互联互通问题,通过数据分析与比对提出修改方案,并现场进行试验,取得预期的效果,保证京津城际与津秦客运专线的跨线运行,为其他客专线路的互联互通解决方案提供借鉴。