Efficiency evaluation and PM emission reallocation of China ports based on improved DEA models

The emission of particulate matter (PM) and other atmospheric pollutants in port operations and shipping have caused a huge negative impact on the environment. Consequently, how to evaluate the environmental efficiency of ports and put forward corresponding countermeasures on this basis is becoming a more important issue than ever before from the perspectives of the government, academia, and society. We construct three data envelopment analysis (DEA) models to evaluate the environmental efficiency of ports under the circumstances of environmental control, non-environmental control and PM emission through inter-ports cooperation. The innovation of the DEA models constructed in this paper lies in: (1) Setting environmental control parameters to uniformly manipulate the situations of environmental control and non-environmental control, etc.; (2) Allowing non-equal proportional change of input index, expected output and non-expected output index; (3) Setting preference coefficients for ports to admit favorable decisions; (4) Providing a distance formula of expected output for PM emission reallocation. Further, data from 11 major ports in China are collected to compare the expected output under different PM emission standards assuming the situation of environmental control and non-environmental control, port cooperation, and non-cooperative sewage discharge. The empirical results show that: (1) Ports in the eastern China (Shanghai, Ningbo, and Nanjing) have higher port efficiency; (2) Port cooperation can improve the overall expected output but it will lose its edge with the improvement of PM emission standards. (3) Ports follow the same trend of output loss regardless of favorable decisions. In the end, the author makes a summary, puts forward relevant policy suggestions and makes the recommendation for future research.     

PHEV发动机驱动工况效率耦合分析与优化控制

单轴并联式混合动力系统（Parallel Hybrid Electric Vehicle,PHEV）包括电池、驱动电机、发动机、自动变速器等多个关键部件。各部件效率特性存在相互耦合的关系,要实现系统整体效率最优,需要辨明影响系统效率的控制参数,并对系统整体效率最优的控制参数进行优化。以装备无级变速器（Continuously Variable Transmission,CVT）的PHEV为研究对象,首先对系统各关键部件的效率特性进行分析,建立各关键部件效率模型,明确各部件效率与控制参数、状态参数之间的关系。在此基础上,对发动机单独驱动模式下动力传递路径中不同部件的效率耦合关系进行分析,推导出系统燃油消耗量与动力系统各状态参数、控制参数之间的函数关系。根据分析结果,选取车辆需求功率及车速为状态参数,变速器速比及发动机转矩为控制参数,以系统燃油消耗量最小为目标建立优化目标函数和约束条件,对系统优化问题进行定义。根据优化问题的特点,设计基于模拟退火的优化算法对优化问题进行求解,获取系统燃油消耗率最小时变速器目标速比和发动机目标转矩随状态参数的变化关系。建立系统仿真模型对所述优化算法进行仿真分析,并搭建混合动力试验台对优化结果进行试验验证。结果表明：无级变速器效率对系统整体效率影响较大,采用优化控制规律使发动机效率有所降低,但无级变速器效率升高更大,系统整体效率升高;在功率需求一定的循环工况下,优化控制算法比传统上仅以发动机效率最高为目标的控制算法节油1%~2%。     

基于内燃动车组的混合动力匹配设计研究

针对内燃动力轨道交通在实际应用中存在的不足以及当前主要新能源技术发展现状,文章结合某内燃动车组的总体参数和配置情况,将内燃机组匹配蓄电池的混合动力方案与纯内燃机组方案进行对比分析,并对混合动力选型和配置进行了计算和分析.结果表明,混合动力匹配方案在降低整车能耗和节省燃油消耗等方面有着显著的优势.     

广义Kantorovich不等式的范数改进及其统计应用

对于广义Kantorovich不等式,选用适当的矩阵度量并给出相应的界,可以应用在线性模型的参数估计的相对效率问题上。用谱范数作为度量工具,给出广义Kantorovich不等式的的上界改进,并将其应用在线性模型中最小二乘估计的相对效率问题上。     

不同加筋形式对结构声辐射性能的影响

本文基于统计能量法分析了横向加筋板,纵向加筋板,斜加筋板,圆心在板角的圆弧形加筋板,圆心在板中轴的圆弧形加筋板,正交加筋板等六种不同加筋形式板在100Hz至1000Hz内的声辐射特性,研究表明正交加筋板的平均辐射声压级要低于另外五种形式的加筋板.研究了两类改变加强筋间距的横向加筋板的声辐射性能,研究表明对于固定左侧的一根加强筋改变加强筋间距,随着加强筋间距的增大,辐射声压级先增大后减小,而对于板中线为基准改变加强筋间距,对辐射声压级影响不大.最后,本文研究加筋板在主机舱中的实际应用,建立了三种主机舱模型,分析模型的声辐射特性,研究表明复合加筋形式的主机舱辐射声压级最小,相对于无加筋形式,要低4~5dB左右.     

Airline energy efficiency measures using the Virtual Frontier Network RAM with weak disposability

In this paper, airline energy efficiency is divided into three stages: the operations stage, the services stage and the sales stage. Greenhouse gas emissions are treated as an undesirable output of the services stage. This new three-stage strategic operating framework is a modification of existing models. A new model, Virtual Frontier Network Range Adjusted Measure with weak disposability, is proposed to evaluate the efficiencies of 22 international airlines, from 2008 to 2012. The results show that the new model can establish more reasonable rankings and confirm new benchmarking airlines and that inclusion in the European Union’s Emissions Trading Scheme has had little influence on the improvement of airline energy efficiency.     

封堵三通卡球原因分析及封堵设备改进设计

文中简述了某天然气管道A站-B站段内检测通球过程中封堵三通处出现的卡堵问题,结合通球、封堵等工程实践,对卡球原因进行了分析,发现了塞堵的设计缺陷,通过理论计算提出了塞堵的优化设计,解决了塞堵无旋转限位的问题,并对优化设计后期实践应用可能存在的问题提出了解决办法,对天然气管道带压封堵、通球,提高输气效率等具有参考意义。     

油田注水管道的腐蚀研究与缓蚀剂评价

油田注水管线所输送介质复杂,腐蚀现象严重,存在安全隐患,一旦因腐蚀泄漏就会造成巨大的经济损失。因此,开展油田注水管道的腐蚀研究及采取措施减缓腐蚀具有重要意义。为此,对某油田注水管道现场采集注入水样及腐蚀产物,通过X-射线衍射及X-射线能谱仪进行分析,分析结果表明腐蚀产物主要是碳酸钙,同时含有一定量的氯化物、碳酸亚铁、硫化物等成分。通过电镜扫描腐蚀产物的微观形貌,发现存在氯离子腐蚀。并通过ICP-OES分析输送介质组分,针对其腐蚀特点及输送介质组分,采用失重法及电化学方法评价了引入季铵盐的咪唑啉缓蚀剂HJD2最佳质量分数及缓蚀机理,实验结果表明该缓蚀剂对该注水管道具有较好的缓蚀作用,在现场注水温度下,最佳质量分数(0.06%)时的缓蚀效率为95.1%,通过注入该缓蚀剂可以有效地减缓该注水管线的腐蚀,延长管线的使用寿命。     

电子干扰效果与效能评估的研究

在研究现有电子干扰效果与评估的基础上,提出与现代电子战相适应的新型干扰效果和评估技术,定义新型的电子干扰效果评估因子和效能评估因子的概念与表示方法。     

基于模糊综合评定的区域雷达组网作战效能研究

为有效分析区域级雷达组网的作战效能,给防空情报系统提供辅助决策,文章运用模糊综合评定的方法,提出了区域级雷达组网作战效能的评价指标体系,建立了三级模糊评判模型,并利用层次分析法确定了各因素的权重,给出了区域级雷达组网作战效能的量化评判方法。最后,就某一区域雷达组网的作战效能进行了评估,给出了参考值。