地下连续墙作为桥梁基础在软土地区的应用

本文以上海浦东国际机场1号桥的设计为背景,介绍了地下连续墙做为桥梁基础的计算模型的建立、计算参数的取值以及构造处理措施。结果表明:当条件受限制时,地下连续墙不失为一种较好的基础型式。     

In Touch通过以太网和OMRON PLC进行连接的方法

为提高工作效率,将In Touch与Omron PLC连接。介绍了先进的人机界面软件In Touch的功能特点,In Touch与Omron PLC的几种通信方法、注意事项。该方法在散粮系统实际应用中取得了可靠的通信质量。     

A multi-spring model for monopile analysis in soft clays

The offshore wind industry in China has seen a rapid development in recent years and is projected to account for half of global yearly installed capacity in the years to come. Monopiles are a popular foundation solution for supporting offshore wind turbines. However, due to challenging seabed soil conditions, which often feature thick normally consolidated soft clays and harsh environmental loading (i.e. frequent occurrence of typhoons), extremely long monopiles are often designed. The large monopiles are costly to fabricate and install and sometimes kills the viability of the concept in cases where the bedrock is relatively shallow and expensive piling in rock is otherwise required. However, the state-of-practice for designing these monopiles in clays is typically by using the API p-y springs, which are widely known to underestimate soil-pile interaction stiffness and capacity for large diameter monopiles. Improvement to the design method can therefore have significant economic implications to the industry. The paper presents an effort toward this direction. A multi-spring beam-column model suitable for monopile design in soil conditions in China is proposed. The model features three soil spring components, namely the lateral p-y spring, the pile tip base shear s-y spring and rotational m-θ springs along the pile shaft. The validity of the model is verified by a comprehensive suite finite element parametric analyses. Guidance for incorporating the cyclic loading effect into design is also provided. The model proposed in this paper has large potentials for application in design practice.     

铁路路基动态变形模量的数值模拟分析

介绍铁路路基动态变形模量理论计算公式的推导及动态变形模量的测试原理,采用有限元软件模拟动态变形模量的测试过程,分析承载板与土体接触压力、路基动态变形模量的影响因素,并计算动态变形模量的有效测试深度.结果表明:在承载板中心一定范围内,接触压力模拟结果较理论计算值大;土体的动弹性模量对接触压力影响很小,可以忽略;路基动态变形模量测试冲击荷载作用下,土体只发生弹性变形;动态变形模量与土体动弹性模量呈线性关系,路基动态变形模量的模拟结果大于理论计算值;土体的泊松比对动态变形模量影响较小;动态变形模量有效测试深度建议取0.5~0.6 m.     

铁路沿线城市空间物业开发研究——以宝鸡市南客站核心区站前广场工程为例

为了提升铁路沿线城市空间物业开发的设计手法,结合宝鸡市南客站核心区站前广场工程的设计实践,从系统性设计观、工程性质解析、消防设计思路、空间建构方法、无缝接驳、技术要素等方面进行研究分析,展示将铁路与城市系统进行一体化设计、利用自然资源解决消防和投资问题、平层空间中对多种交通体系的有机组织、不同坐标和高程系统背景下分区域构建柱网、各板块交接处的问题解决等技术成果,总结出同类型建筑的设计思路,力求为该领域的建筑设计发展提供有益的借鉴。     

垃圾土力学特性及其路基填筑应用研究

将垃圾土应用于公路路基填筑是实现垃圾土大规模资源化利用的有效途径。本文首先对实际垃圾土进行筛分处理,制得适用于公路路基的垃圾筛余土(简称垃圾土);进而,通过室内试验研究了直接压实垃圾土和固化垃圾土的抗剪强度、CBR值等力学特性;以此为基础,修筑直接压实垃圾土路基试验段,并采用适宜的新型施工工艺修筑固化垃圾土路基试验段,监测路基的工后沉降随时间的变化规律,对比两种垃圾土路基的应用效果。结果表明:固化垃圾土与直接压实垃圾土相比,粘聚力提高1.6~1.9倍,内摩擦角提高30%以上,CBR值提高4.5~5.1倍;固化垃圾土路基的工后沉降比直接压实垃圾土路基降低64.7%,且能够更早地趋于稳定。以上结果证明:本文提出的固化垃圾土路基施工工艺和垃圾土资源化利用途径是可行的。     

新城区轨道交通线路规划关键问题研究

对国内外主城与新城衔接的新城区(郊区)轨道线特征及交通功能等因素进行总结分析，并结合武汉市及国内外典型城市新城区轨道交通规划建设经验，对新城区轨道交通线路规划关键问题做深入研究。提出对新城区轨道交通线路规划中与其他不同层次轨道线网功能及技术标准的衔接关系；与新城区发展应注重以轨道交通引领新城区协同发展，与城市空间结构高度契合关系；新城区轨道线路走向应沿预测主要客流走廊，串联新城区商业、交通枢纽等大型客流集散点，以缓解开通初期普遍面临客流量增长缓慢，客运强度偏低的问题。     

波形钢腹板连续梁桥设计和施工相关问题探讨

大跨度波形钢腹板梁桥是一种新型桥梁结构,因其采用波形钢腹板替代混凝土腹板,相比传统的预应力混凝土连续梁桥,具有轻型、经济等诸多方面的特点。以前山河波形钢腹板连续梁桥为背景,针对设计和施工中的诸如内衬砼、剪力键、横隔板等相关问题进行了分析探讨。     

复杂地形条件下桥隧相连隧道洞口结构设计研究

蒙华铁路坪桥1号隧道进口洞顶基岩外凸、洞顶以下岩面高且直立、洞顶上部地形偏压高陡,地形条件极其复杂。营盘山大桥与坪桥1号隧道进口紧密相连,存在桥台与隧道洞门结构相互干扰以及边坡防护、隧道出洞和洞口场地布置等一系列难题,设计难度极大。为解决这些难题,通过对现场实际地形、地质情况进行研究,对比分析"整体式"与"分离式"桥隧相连结构的优缺点,提出桥台与隧道相结合的"整体式"桥隧相连结构方案;同时,针对地形偏压高陡,提出非对称结构设计方案,实现了隧道"零"仰坡出洞,解决了洞口边坡防护的难题;最后,提出架立临时贝雷梁的方案,解决了隧道出洞及洞口场地布置的难题。     

Modelling,simulation and applications of longitudinal train dynamics

ABSTRACT

Significant developments in longitudinal train simulation and an overview of the approaches to train models and modelling vehicle force inputs are firstly presented. The most important modelling task, that of the wagon connection, consisting of energy absorption devices such as draft gears and buffers, draw gear stiffness, coupler slack and structural stiffness is then presented. Detailed attention is given to the modelling approaches for friction wedge damped and polymer draft gears. A significant issue in longitudinal train dynamics is the modelling and calculation of the input forces – the co-dimensional problem. The need to push traction performances higher has led to research and improvement in the accuracy of traction modelling which is discussed. A co-simulation method that combines longitudinal train simulation, locomotive traction control and locomotive vehicle dynamics is presented. The modelling of other forces, braking propulsion resistance, curve drag and grade forces are also discussed. As extensions to conventional longitudinal train dynamics, lateral forces and coupler impacts are examined in regards to interaction with wagon lateral and vertical dynamics. Various applications of longitudinal train dynamics are then presented. As an alternative to the tradition single wagon mass approach to longitudinal train dynamics, an example incorporating fully detailed wagon dynamics is presented for a crash analysis problem. Further applications of starting traction, air braking, distributed power, energy analysis and tippler operation are also presented.