The problem of cold starts: A closer look at mobile source emissions levels

While the phenomenon of excess vehicle emissions from cold-start conditions is well known, the magnitude and duration of this phenomenon is often unclear due to the complex chemical processes involved and uncertainty in the literature on this subject. This paper synthesizes key findings regarding the influence of ambient and engine temperatures on light-duty vehicle (LDV) emissions. Existing literature, as well as analytical tools like the U.S. Environmental Protection Agency’s Motor Vehicle Emission Simulator (MOVES), indicate that while total vehicle emissions have dropped significantly in recent years, those associated with cold starts can still constitute up to 80% for some pollutant species. Starting emissions are consistently found to make up a high proportion of total transportation-related methane (CH₄), nitrous oxide (N₂O), and volatile organic compounds (VOCs). After 3–4 min of vehicle operation, both the engine coolant and the catalytic converter have generally warmed, and emissions are significantly lower. This effect lasts roughly 45 min after the engine is shut off, though the cooling rate depends greatly on the emission species and ambient temperature. Electrically (pre-)heated catalysts, using the bigger batteries available on hybrid drivetrains and plug-in vehicles, may be the most cost-effective technology to bring down a sizable share of mobile source emissions. Trip chaining (to keep engines warm) and shifting to non-motorized modes for shorter trips, where the cold start can dominate emissions, are also valuable tactics.     

Including congestion effects in urban road traffic CO2 emissions modelling: Do Local Government Authorities have the right options?

Tailpipe emissions from vehicles on urban road networks have damaging impacts, with the problem exacerbated by the common occurrence of congestion. This article focuses on carbon dioxide because it is the largest constituent of road traffic greenhouse gas emissions. Local Government Authorities (LGAs) are typically responsible for facilitating mitigation of these emissions, and critical to this task is the ability to assess the impact of transport interventions on road traffic emissions for a whole network.This article presents a contemporary review of literature concerning road traffic data and its use by LGAs in emissions models (EMs). Emphasis on the practicalities of using data readily available to LGAs to estimate network level emissions and inform effective policy is a relatively new research area, and this article summarises achievements so far. Results of the literature review indicate that readily available data are aggregated at traffic level rather than disaggregated at individual vehicle level. Hence, a hypothesis is put forward that optimal EM complexity is one using traffic variables as inputs, allowing LGAs to capture the influence of congestion whilst avoiding the complexity of detailed EMs that estimate emissions at vehicle level.Existing methodologies for estimating network emissions based on traffic variables typically have limitations. Conclusions are that LGAs do not necessarily have the right options, and that more research in this domain is required, both to quantify accuracy and to further develop EMs that explicitly include congestion, whilst remaining within LGA resource constraints.     

基于模糊综合评价法的城市综合管廊结构健康评价方法研究

为解决城市综合管廊结构健康状况评估结果无法量化和指导运维的问题，通过分析模糊综合评价理论在交通隧道结构健康评价方法研究中的应用，依照类比思想，利用该理论建立城市综合管廊结构健康状况评价体系。首先，依据有关养护规定和调研结果，基于不同需求分别建立管廊结构的本体完好状况和本体结构状况评价指标体系； 其次，以交通隧道和综合管廊养护经验为基础，划分各指标的分级判定标准； 然后，采用层次分析法，计算评价指标的权重分配； 最后，采用柯西分布型隶属函数和矩阵型隶属函数确定各指标的隶属度，建立一级和二级模糊综合评价模型，赋予评价向量中各评语相应分值，将评价向量单值化，判定管廊结构健康状况。采用所提出的评价方法应用于实际工程，所得评价结果与经验评判得到的结果相同。     

Did Chinese cities that implemented driving restrictions see reductions in PM10?

Imposing driving restrictions is becoming increasingly popular as a policy intended to control urban air pollution. Existing studies on this topic offer highly mixed observations, and each study tends to focus on only one city. In this paper, we used 11 Chinese cities with driving restrictions as the treatment group, and compared them to other cities that did not implement the policy. Based on a propensity score matching and difference-in-difference analysis, we found no evidence of a decrease in PM10 concentrations in cities after they implemented driving restrictions. This finding may be attributed to an increase in the number of cars in these cities after implementing driving restrictions, but we also found no evidence of an improvement in air quality for a given number of cars after implementation of the policies.     

Simulating the air quality impacts of traffic calming schemes in a dense urban neighborhood

In this study, the effects of isolated traffic calming measures and area-wide calming schemes on air quality in a dense neighborhood were estimated using a combination of microscopic traffic simulation, emission, and dispersion modeling. Results indicated that traffic calming measures did not have as large an effect on nitrogen dioxide (NO₂) concentrations as the effect observed on nitrogen oxide (NO_x) emissions. Changes in emissions resulted in highly disproportional changes in pollutant levels due to daily meteorological conditions, road geometry and orientation with respect to the wind. Average NO₂ levels increased between 0.1% and 10% with respect to the base-case while changes in NO_x emissions varied between 5% and 160%. Moreover, higher wind speeds decreased NO₂ concentrations on both sides of the roadway. Among the traffic calming measures, speed bumps produced the highest increases in NO₂ levels.     

The vulnerability of the environment to spills of dangerous substances on highways: A diagnosis based on multi criteria modeling

Highways and freeways are the main infrastructure channel used to transport cargo in Brazil. This cargo often includes dangerous chemical products which can, in the event of an accident, negatively impact the environment. The development and implementation of tools for the rapid diagnosis of environmental vulnerability in the transportation of dangerous goods has been studied. However, for highways and freeways there is a lack of studies based on environmental attributes, and not just based on statistical data which demands a specific period for collection and analysis and only after that the implementation of preventive measures. Thus, evaluation grounded on multiple criteria embedded in Geographic Information System (GIS) has significant potential for the practical implementation of risk management of road transportation of dangerous goods. This study has determined the environmental vulnerability of route BR 050, specifically the segment between the cities of Uberlândia and Uberaba in the state of Minas Gerais, where multi criteria analysis has been efficient in determining the most vulnerable areas. The main attributes analyzed were the drainage density, soil type and geology, determining that in case of an accident with dangerous substances the regional environment would be immediately affected, and so endorsing the use of this tool in many segments involved in environmental management of highway enterprises.     

高速公路沥青路面施工质量控制分析

无接缝、平整、行车舒适、噪音低以及振动小、易于养护等优点,使沥青混凝土路面成为我国国内公路面层普遍采用的一种比较好的结构形式。但是如果施工中不能按照施工工艺严格的进行施工质量控制,则很容易导致路面的一系列质量问题,这不仅影响使用功能,还影响影响其社会效益。     

关于大学生心理健康教育课程的几点思考

大学生心理健康教育课程教学的目的是培养学生健康的心理和良好的心理素质,使其在思想认识、知识和技能三个层面学有所获。课程教学应遵循理论与实践相结合、教师讲授与学生体验相结合,通过课堂讲授、小组讨论与典型案例分析、心理素质训练与拓展等体验式教育方法进行教学;采用理论效果评估与实际操作效果评估相结合的方式对课程效果进行评估。     

Vehicle electrification in a developing country: Status and issue,from a well-to-wheel perspective

The increase of public attention, scientific research and political interest in environmental problems associated with transportation has provided the motivation for re-invention of electric vehicles. However the usage of grid-dependent EVs with a high-carbon electricity grid might produce more damage to the environment. This study aims to provide an environmental impact comparison of ICEVs, HEVs and EVs during their usage cycle, by modeling their energy consumption (electricity or fuel) and the supply chains of the supplied energy, (well-to-wheel) based on a life cycle assessment. The results show that running EVs with the existing mixed sources of electrical energy produce larger impacts on the environment 60% of the time; when compared to HEVs. When compared to ICEVs, EVs produce a larger environmental impact on 7 out of 15 environmental impact categories. Overall the environmental impacts of EVs are substantial based on the well-to-wheel analysis. It will continue to be so if no change is made to the methods of electricity generation in the near future. Given that the environmental profile of EVs is linked with the existing national electricity generation mix, the national electricity supply must be made cleaner before the electrification of the urban transport system.     

基于沉降差的填石路堤施工工艺与质量控制研究

结合南方地区填石路堤施工,通过填石路堤试验段研究,介绍了填石路堤的施工工艺和质量控制要求,并通过沉降差检测分析,说明了沉降差作为填石路堤质量控制指标的可行性,为同类工程提供参考.