UD63型尼桑汽车起动和充电系控制电路及故障排除

系统地介绍UD63型尼桑汽车起动系和充电系控制电路的原理及故障分析,并给出检修实例。有利于准确、快速地排除该类车型的故障。     

尼桑汽车起动系和充电系控制电路分析及故障检修

叙述了尼桑汽车起动系、充电系的先进性和保护完善性；详细地介绍了起动系和充电系控制电路的原理及故障诊断。所给出的检修实例，对于准确、快速地检查、确定并排除尼桑汽车起动系及充电系控制电路的故障具有实际意义。     

一种适合于汽车性能测试的加速度传感器

本文介绍微型集成加顺的原理，结构，伺服电路组成和基本性能，说明了它的典型应用，特别指出它在汽车性能测试中的广阔应用前景。     

车辆折算系数的分类及算法

提出了标准车的选择原则:车长等于约定的长度;当交通流密度很小时,以道路设计速度行驶;驾驶员遵守交通规则。定义了微观车辆折算系数:交通流全部由标准车组成时的流量与交通流全部由某种车组成时的流量之比。定义了聚类车辆折算系数:组成该类车型的所有自然车的微观折算系数与组成比例的乘积之和。定义了宏观车辆折算系数:组成混合交通流的所有自然车的微观折算系数与组成比例的乘积之和。计算了这三种车辆折算系数。     

锁紧气缸控制回路设计

介绍了锁紧气缸的结构、锁紧方式和几种基本的控制回路,给出了气缸两腔压力平衡状态下输入气压的关系。     

Fuzzy-logic applied to yaw moment control for vehicle stability

In this paper, we propose a new yaw moment control based on fuzzy logic to improve vehicle handling and stability. The advantages of fuzzy methods are their simplicity and their good performance in controlling non-linear systems. The developed controller generates the suitable yaw moment which is obtained from the difference of the brake forces between the front wheels so that the vehicle follows the target values of the yaw rate and the sideslip angle. The simulation results show the effectiveness of the proposed control method when the vehicle is subjected to different cornering steering manoeuvres such as change line and J-turn under different driving conditions (dry road and snow-covered).     

Ontologies for transportation research: A survey

Transportation research relies heavily on a variety of data. From sensors to surveys, data supports day-to-day operations as well as long-term planning and decision-making. The challenges that arise due to the volume and variety of data that are found in transportation research can be effectively addressed by ontologies. This opportunity has already been recognized – there are a number of existing transportation ontologies, however the relationship between them is unclear. The goal of this work is to provide an overview of the opportunities for ontologies in transportation research and operation, and to present a survey of existing transportation ontologies to serve two purposes: (1) to provide a resource for the transportation research community to aid in understanding (and potentially selecting between) existing transportation ontologies; and (2) to identify future work for the development of transportation ontologies, by identifying areas that may be lacking.     

Balancing energy consumption and risk of delay in high speed trains: A three-objective real-time eco-driving algorithm with fuzzy parameters

Eco-driving is an energy efficient traffic operation measure that may lead to important energy savings in high speed railway lines. When a delay arises in real time, it is necessary to recalculate an optimal driving that must be energy efficient and computationally efficient.In addition, it is important that the algorithm includes the existing uncertainty associated with the manual execution of the driving parameters and with the possible future traffic disturbances that could lead to new delays.This paper proposes a new algorithm to be executed in real time, which models the uncertainty in manual driving by means of fuzzy numbers. It is a multi-objective optimization algorithm that includes the classical objectives in literature, running time and energy consumption, and as well a newly defined objective, the risk of delay in arrival. The risk of delay in arrival measure is based on the evolution of the time margin of the train up to destination.The proposed approach is a dynamic algorithm designed to improve the computational time. The optimal Pareto front is continuously tracked during the train travel, and a new set of driving commands is selected and presented to the driver when a delay is detected.The algorithm evaluates the 3 objectives of each solution using a detailed simulator of high speed trains to ensure that solutions are realistic, accurate and applicable by the driver. The use of this algorithm provides energy savings and, in addition, it permits railway operators to balance energy consumption and risk of delays in arrival. This way, the energy performance of the system is improved without degrading the quality of the service.     

高压共轨高速电磁阀自升压双电源驱动方法研究

在对现有高压共轨高速电磁阀驱动电路进行分析的基础上,提出了一种基于电磁阀自身的自升压方式,一方面把高速电磁阀关闭时本身储存的电能回收到储能电容中,另一方面在两缸工作间隙利用电磁阀线圈作为升压电路电感对储能电容进行能量补充,保证储能电容上的电压达到一个稳定状态。电路在保证实现双电压快速驱动的同时,使驱动结束的能量得到有效回收,同时省去外接专用升压电路所需要的电感部件,减小了电源电路的体积和设计成本,并且电控单元印制线路板的电磁兼容性设计易于保证。应用该方法对某高压共轨部件高速电磁阀进行试验,匹配出驱动参数,并进行稳定性试验验证,结果表明该方法能够满足工程应用需求。     

基于多种失效模式SPS复合钢板替换船用钢板的优化设计

在SPS复合钢板的设计中获取不同的失效模式。以减重为目标,应用序列二次规划法对SPS复合钢板进行等效船用钢板的优化设计,同时对SPS复合钢板进行多目标优化,应用层次分析法定各目标的权重。在这两种优化方法的基础上,对船用钢板与SPS复合钢板进行了屈曲、弯曲对比数值分析,同时将结果与理论计算结果对比分析。结果表明,SPS复合钢板重量能够减轻37%以上,刚度增加两倍多,但厚度增加70%。